Altec Lansing 120 Satellite Speaker System Instruction Manual

Ọrọ Iṣaaju

The Altec Lansing 120 is a two-satellite speaker system designed to enhance the audio experience for various devices. This system provides clear sound for personal computers, video gaming systems, portable CD players, MP3 players, and other audio sources. Its compact design and simple connectivity make it a versatile audio solution.

Awọn ẹya pataki pẹlu:

2 Watts total Continuous Power output.
Compatibility with multiple audio sources including PCs, gaming systems, portable CD players, and MP3 players.
Integrated Power On/Off and Master Volume controls for easy operation.
Convenient Headphone Jack for private listening.
Shielded Satellites to prevent interference with other electronic devices.

Package Awọn akoonu

Jọwọ rii daju pe gbogbo awọn ohun kan wa ninu apo rẹ:

Two (2) Altec Lansing 120 Satellite Speakers
One (1) Audio Input Cable (3.5mm stereo jack)
Ọkan (1) AC Power Adapter

Awọn ilana iṣeto

Follow these steps to set up your Altec Lansing 120 speaker system:

Gbigbe Agbọrọsọ: Place the two satellite speakers on a stable, flat surface, ideally on either side of your listening area (e.g., computer monitor, TV) for optimal stereo sound. Ensure they are positioned to direct sound towards you.
Sopọ si Agbara: Plug the AC power adapter into the designated power input port on one of the satellite speakers. Then, plug the other end of the power adapter into a standard wall electrical outlet.
Sopọ si Orisun Olohun: Locate the 3.5mm audio input jack on the back of the primary satellite speaker. Connect one end of the supplied audio input cable to this jack. Connect the other end of the audio cable to the audio output jack (typically green) on your PC, gaming console, portable CD player, or MP3 player.

Altec Lansing 120 Satellite Speakers connected to a device

Image: The Altec Lansing 120 satellite speakers, showing their compact design and typical setup next to a computer monitor. The image illustrates the two speakers with their cables connected, ready for use.

Awọn ilana Iṣiṣẹ

Once the speakers are set up, follow these steps for operation:

Titan/Apapa: Locate the integrated power control (often combined with the volume knob) on the primary satellite speaker. Turn the knob clockwise to power on the speakers. Turn it counter-clockwise until it clicks to power off.
Iṣatunṣe Iwọn didun: Rotate the master volume control knob on the primary satellite speaker to increase or decrease the sound level. It is recommended to start with a low volume and gradually increase it to a comfortable listening level. Also, ensure the volume on your audio source device (PC, MP3 player, etc.) is adequately adjusted.
Lilo Jack Agbekọri: For private listening, plug your headphones into the headphone jack located on the primary satellite speaker. Plugging in headphones will automatically mute the speaker output. Unplugging the headphones will restore sound through the speakers.

Itoju

To ensure the longevity and optimal performance of your Altec Lansing 120 speaker system, follow these maintenance guidelines:

Ninu: Use a soft, dry cloth to clean the exterior of the speakers. Avoid using liquid cleaners, aerosols, or abrasive materials, as these can damage the finish or internal components.
Afẹfẹ: Ensure that the speakers are placed in an area with adequate ventilation. Do not block any vents or openings on the speaker enclosures.
Ibi ipamọ: If storing the speakers for an extended period, disconnect them from power and audio sources. Store them in a cool, dry place away from direct sunlight and extreme temperatures.
Itọju USB: Avoid sharply bending or crimping the power and audio cables. Regularly check cables for any signs of wear or damage.

Laasigbotitusita

Ti o ba pade awọn ọran pẹlu eto agbọrọsọ rẹ, tọka si awọn iṣoro ti o wọpọ ati awọn ojutu wọnyi:

Isoro	Owun to le Fa	Ojutu
Ko si ohun lati ọdọ awọn agbohunsoke	Àwọn agbọ́hùnsọ̀ kò ṣiṣẹ́. Volume too low on speakers or audio source. Okùn ohùn kò sopọ̀ dáadáa. Àwọn agbekọri ti a so mọ́.	Rí i dájú pé àwọn agbohunsoke ti wa ni agbara. Increase volume on both speakers and audio source. Ṣayẹwo gbogbo awọn asopọ okun ohun. Unplug headphones from the jack.
Daru tabi ohun koyewa	Iwọn didun ga ju. Orisun ohun afetigbọ ti ko dara. Awọn asopọ okun alaimuṣinṣin.	Lower the volume on speakers and/or audio source. Gbiyanju orisun ohun ti o yatọ tabi file. Rii daju pe gbogbo awọn kebulu ti sopọ ni aabo.
Agbọrọsọ kan nikan n ṣiṣẹ	Asopọ alaimuṣinṣin si agbọrọsọ ti kii ṣiṣẹ. Okun ohun afetigbọ.	Check the connection of the non-working speaker to the primary speaker. Try a different audio cable if available.

Awọn pato

Technical details for the Altec Lansing 120 Satellite Speaker System:

Ẹya ara ẹrọ	Ẹ̀kúnrẹ́rẹ́
Brand	Altec Lansing
Nọmba awoṣe	120
Agbọrọsọ Iru	Satẹlaiti
Asopọmọra Technology	Ti firanṣẹ
Iṣagbesori Iru	Freestanding, Plug Mount
Orisun agbara	Okun Itanna
Ọna Iṣakoso	Remote (Note: Refers to integrated controls, not a separate remote unit)
Àwọ̀	Dudu
UPC	021986940029

Atilẹyin ọja ati Support

For detailed warranty information, product registration, and technical support, please visit the official Altec Lansing webojula tabi kan si wọn onibara iṣẹ Eka. Tọju iwe-ẹri rira rẹ bi ẹri rira fun eyikeyi awọn ibeere atilẹyin ọja.

Akiyesi: Awọn ofin atilẹyin ọja le yatọ nipasẹ agbegbe ati alagbata.