Rane RS-1 Power Supply Instruction Manual

1. Ifihan

The Rane RS-1 is a dedicated external power supply designed to provide reliable 120VAC power to a range of compatible Rane audio products. This manual provides essential information for the safe and correct setup, operation, and maintenance of your RS-1 power supply.

Please read this manual thoroughly before using the product to ensure proper function and to prevent damage to the unit or connected equipment.

2. Alaye Aabo

Orisun Agbara: Connect the RS-1 only to a 120VAC, 60Hz power outlet. Ensure the outlet is properly grounded.
Afẹfẹ: Do not block any ventilation openings. Ensure adequate airflow around the power supply.
Ọrinrin: Do not expose the unit to rain, moisture, or excessive humidity. Keep liquids away from the power supply.
Ooru: Yẹra fún gbígbé ẹ̀rọ náà sí ẹ̀gbẹ́ àwọn orísun ooru bíi radiators, àwọn ìwé ìforúkọsílẹ̀ ooru, àwọn stovu, tàbí àwọn ẹ̀rọ míràn tí ń mú ooru jáde.
Awọn kebulu: Dabobo okun agbara lati ma rin lori tabi pin, ni pataki ni awọn pilogi, awọn ohun elo irọrun, ati aaye nibiti wọn ti jade kuro ninu ohun elo naa.
Ṣiṣẹ: Maṣe gbiyanju lati ṣiṣẹ ọja yi funrararẹ. Tọkasi gbogbo iṣẹ si oṣiṣẹ oṣiṣẹ ti o peye.
Ge asopọ: Unplug the power supply from the wall outlet during lightning storms or when unused for long periods.

3. Eto

Follow these steps to correctly set up your Rane RS-1 Power Supply:

Identify Compatible Device: Ensure your Rane audio product requires the RS-1 power supply and has the appropriate RJ-45 style power input port.
Sopọ si Ẹrọ: Carefully insert the RJ-45 style connector from the RS-1 power supply into the designated power input port on your Rane audio device. Ensure a secure connection.
Sopọ si Ile-iṣẹ Agbara: Plug the two-prong AC power cord of the RS-1 into a standard 120VAC, 60Hz wall outlet.
Agbara Tan: Once connected, your Rane audio device should receive power. Refer to your Rane audio device's manual for specific power-on procedures.

Rane RS-1 Power Supply unit with AC plug and RJ-45 style connector

Image: Rane RS-1 Power Supply. This image displays the Rane RS-1 Power Supply, a black rectangular unit with an attached power cord featuring a two-prong North American plug on one end and an RJ-45 style connector on the other, designed to provide power to compatible Rane audio equipment.

4. Awọn ilana Iṣiṣẹ

The Rane RS-1 is an external power supply that operates automatically once connected to a power source and a compatible Rane device. It does not have user-adjustable controls.

Ensure all connections are firm before applying power.
The power supply is designed for continuous operation within its specified voltage ati wattage ifilelẹ.
Always disconnect the power supply from the wall outlet before disconnecting it from the Rane audio device, especially if the device does not have its own power switch.

5. Itọju

The Rane RS-1 Power Supply requires minimal maintenance. Follow these guidelines to ensure longevity:

Ninu: Disconnect the power supply from the wall outlet before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or aerosol sprays.
Ayewo: Periodically inspect the power cord and connectors for any signs of damage, fraying, or loose connections. If damage is observed, discontinue use and seek professional servicing.
Ibi ipamọ: Tí o kò bá lò ó fún ìgbà pípẹ́, tọ́jú agbára náà sí ibi tí ó tutù tí ó sì gbẹ, kúrò níbi tí oòrùn kò ti lè ràn án tàbí ibi tí ó gbóná janjan.

6. Laasigbotitusita

If you encounter issues with your Rane RS-1 Power Supply, refer to the following common troubleshooting steps:

Isoro	Owun to le Fa	Ojutu
No power to connected Rane device.	Power supply not plugged into wall outlet. Ibùdó ìtajà ògiri kò ṣiṣẹ́. RJ-45 style connector not fully inserted into Rane device. Ipese agbara tabi okun waya ti ko tọ.	Ensure the power supply is securely plugged into a live wall outlet. Ṣe idanwo iṣan odi pẹlu ẹrọ miiran. Verify the RJ-45 style connector is firmly seated in the Rane device's power input. If issues persist, contact Rane support for assistance.
Agbara igba diẹ.	Loose connection at wall outlet or device. Damaged power cord or connector.	Ṣayẹwo gbogbo awọn isopọ fun wiwọ. Inspect the power cord and connectors for damage. Replace if necessary.

If these steps do not resolve the issue, contact Rane customer support or a qualified service technician.

7. Awọn pato

Awoṣe	RS1
Brand	Rane
Iṣagbewọle Voltage	120 folti AC
Orisun agbara	AC
Wattage	1000 watt
Power Plug Iru	Type A - 2 pin (North American)
Iwọn Nkan	1.3 iwon (0.59 kg)
Awọn iwọn	(Not specified in data)
UPC	687499101045
ASIN	B0002IU02S

8. Compatible Rane Devices

The Rane RS-1 Power Supply is compatible with the following Rane audio products:

AC 22B
AC 23B
AD 22d
AP 13
AVA 22d
CP52
CP64
DA 216a
DA 26
DC 24
DMS 22
GE Ọdun 130
GE Ọdun 215
GE Ọdun 30
HC 4
HC 6
MLM 42
MLM 82a
MM 8z
MP2
MP 22z
MP 24z
MP2016
MS 1b
PE 17
PS 1
RA 30
SM 26B
SM 82
SRM 66
SSE 35
THX 22
THX 44
TTM 54i
TTM 56
VP12

9. Atilẹyin ọja ati Support

For information regarding warranty coverage, product registration, or technical support, please refer to the official Rane website or contact Rane customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

Rane Official Webojula: www.rane.com

Rane RS1