THOMSON CS706 Micro Hi-Fi System User Manual

2.1 Ṣiṣii ati Gbe

Carefully remove all components from the packaging. Ensure all parts are present: main unit, two speakers, remote control, and power cable. Place the main unit and speakers on a stable, flat surface, away from direct sunlight, heat sources, and moisture. Allow adequate ventilation around the unit.

2.2 Nsopọ awọn Agbọrọsọ

Connect the speaker wires to the corresponding speaker terminals on the rear of the main unit. Ensure correct polarity (red to red, black to black) for optimal sound quality.

• Locate the speaker terminals on the back of the main unit.
• Insert the stripped ends of the speaker wires into the terminals.
• Secure the wires firmly.

2.3 Asopọ agbara

Plug the power cable into the AC IN socket on the rear of the main unit, then plug the other end into a suitable wall outlet. The unit will enter standby mode.

2.4 Connecting External Devices (USB Host / Auxiliary)

The CS706 features a USB Host port and an Auxiliary input for connecting external audio sources.

• Gbalejo USB: Connect your digital player or USB storage device directly to the USB port on the front panel. This allows for playback of MP3/WMA files and direct recording from CD or radio to your MP3 player.
• Iṣawọle Iranlọwọ: Use a 3.5mm audio cable (not supplied) to connect external audio devices (e.g., smartphone, tablet) to the AUX IN jack on the front or rear panel (location may vary).

2.5 Wireless PC Connectivity

The system supports wireless connection to a PC for music transfer. Refer to the specific software or setup instructions provided with your PC for establishing this connection. This feature allows you to download music from your PC to the system without wired connections.

3.1 Basic Playback (CD/MP3/WMA)

1. Tẹ awọn AGBARA bọtini lati tan-an kuro.
2. Tẹ awọn IṢẸ or ORISUN bọtini lati yan ipo CD.
3. Tẹ awọn ŠI / PADE bọtini lati ṣii atẹ disiki naa.
4. Place a CD, CD-R, CD-RW, MP3, or WMA disc onto the tray with the label side up.
5. Tẹ ŠI / PADE lẹẹkansi lati pa awọn atẹ.
6. Playback will start automatically. If not, press the ERE/SINMI bọtini.
7. Lo SILE buttons (◀◀ / ▶▶) to navigate tracks and DURO lati pari ṣiṣiṣẹsẹhin.

3.2 USB Host Functionality

Connect a USB flash drive or compatible digital player to the USB port. The system will automatically detect the device. Use the IṢẸ button to select USB mode. You can then browse and play MP3/WMA files ti o ti fipamọ lori ẹrọ.

Direct Recording to MP3 Player: When a compatible MP3 player is connected via USB, you can record audio directly from a CD or the radio. Follow the on-screen prompts or refer to the specific recording instructions in the full manual (if available).

3.3 Rip & Go Function

The Rip & Go function allows you to record music from a CD, radio, or auxiliary input directly to a connected USB device (e.g., MP3 player) at two selectable speeds.

1. Ensure a USB device is connected and has sufficient free space.
2. Select the source you wish to record from (CD, Radio, or AUX).
3. Initiate playback of the desired audio.
4. Tẹ awọn RIP & GO button (or equivalent, refer to unit controls).
5. Select the desired recording speed (e.g., 1x or 2x).
6. The recording will begin. Press DURO lati pari igbasilẹ naa.

3.4 ID3Tag Lilọ kiri

When playing MP3 or WMA files from a CD or USB device, the system supports ID3Tag navigation. This allows for easy searching and browsing of your music by artist, album, genre, title, and year. Use the navigation buttons on the unit or remote control to access and select categories.

3.5 Radio Operation (FM/AM)

While not explicitly detailed in the product description, micro Hi-Fi systems typically include radio functionality.

1. Tẹ awọn IṢẸ or ORISUN bọtini lati yan ipo redio FM tabi AM.
2. Extend the FM antenna for better reception.
3. Tẹ awọn TUNE + or TÚNṢẸ́ - awọn bọtini lati tune si ibudo pẹlu ọwọ.
4. Tẹ mọlẹ TUNE + or TÚNṢẸ́ - for automatic station scanning.
5. Lati fi ibudo kan pamọ, tẹ awọn ÌRÁNTÍ bọtini, lẹhinna lo TẸTẸ + or TẸ̀SẸ̀ TẸ̀LẸ̀ - lati yan nọmba tito tẹlẹ, ko si tẹ ÌRÁNTÍ lẹẹkansi lati jẹrisi.

4.1 Ninu Unit

To clean the exterior of the unit, use a soft, dry cloth. For stubborn stains, slightly dampen the cloth with water or a mild detergent. Never use abrasive cleaners, alcohol, benzene, or thinners, as these can damage the finish.

4.2 Disiki Itọju

Handle discs by their edges to avoid fingerprints. Keep discs clean and free from scratches. Store discs in their cases when not in use. Do not expose discs to direct sunlight or high temperatures.

4.3 Itọju Gbogbogbo

• Maṣe ṣe idiwọ awọn ṣiṣi eefin.
• Yago fun gbigbe awọn nkan ti o wuwo sori ẹyọkan.
• Ti o ba ti kuro yoo ko ṣee lo fun ohun o gbooro sii akoko, yọọ okun agbara lati ogiri iṣan.

7.1 Olupese ká atilẹyin ọja

This THOMSON CS706 Micro Hi-Fi System comes with a 1-odun olupese ká atilẹyin ọjaÀtìlẹ́yìn yìí bo àbùkù nínú àwọn ohun èlò àti iṣẹ́ ọwọ́ lábẹ́ lílo déédéé. Jọ̀wọ́ pa ẹ̀rí ríra rẹ mọ́ fún àwọn ẹ̀tọ́ àtìlẹ́yìn. Àtìlẹ́yìn náà kò bo ìbàjẹ́ tí ó ṣẹlẹ̀ nípasẹ̀ ìlòkulò, jàmbá, àtúnṣe tí a kò fún ní àṣẹ, tàbí ìbàjẹ́ déédé.

7.2 Onibara Support

For technical assistance, service, or warranty inquiries, please contact THOMSON customer support. Refer to the official THOMSON webaaye tabi apoti ọja rẹ fun alaye olubasọrọ ti o pọ julọ julọ.

Atilẹyin Ayelujara: Visit the official THOMSON webaaye fun awọn FAQ, iforukọsilẹ ọja, ati awọn orisun atilẹyin.

Awọn ile-iṣẹ iṣẹ: Information on authorized service centers may be available on the THOMSON webojula.