TIMEX Expedition Chronograph T49747 Men's Watch Instruction Manual

Ọrọ Iṣaaju

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your TIMEX Expedition Chronograph T49747 watch. Please read this guide thoroughly to ensure proper use and care of your timepiece.

Image: The TIMEX Expedition Chronograph T49747 watch, featuring a white dial and a brown leather strap.

Ṣeto

1. Ṣiṣeto Akoko naa

1. Fa ade jade si awọn keji tẹ ipo.
2. Yi ade naa pada si ọna aago tabi counter-clockwisi lati ṣeto wakati ati ọwọ iṣẹju si akoko ti o fẹ.
3. Titari ade pada si ipo deede lati bẹrẹ iṣọ naa.

2. Ṣiṣeto Ọjọ

1. Fa ade jade si awọn akọkọ tẹ ipo.
2. Turn the crown clockwise or counter-clockwise to set the date.
3. Titari ade pada si ipo deede.

3. Chronograph Hand Reset

If the chronograph hands do not reset to the zero position, follow these steps:

1. Fa ade jade si awọn keji tẹ ipo.
2. Press the top pusher (A) repeatedly to advance the chronograph seconds hand.
3. Press the bottom pusher (B) repeatedly to advance the chronograph minute hand.
4. Once all chronograph hands are aligned to the 12 o'clock (zero) position, push the crown back in to the normal position.

Awọn ilana Iṣiṣẹ

1. Lilo Chronograph

• Si bẹrẹ the chronograph, press the top pusher (A).
• Si Duro the chronograph, press the top pusher (A) again.
• Si tunto the chronograph to zero, press the bottom pusher (B) while the chronograph is stopped.

2. Indiglo Alẹ́ Ìmọ́lẹ̀

To activate the Indiglo night-light, press and hold the crown (C) for a few seconds. The entire dial will illuminate for easy viewing ni kekere-ina awọn ipo.

3. Iṣẹ-ṣiṣe itaniji

This watch features an alarm function. Refer to the detailed instructions provided in the full product manual for setting and activating the alarm. Typically, the alarm is set by pulling the crown to a specific position and rotating it to align the alarm hand with the desired time.

Itoju

1. Batiri Rirọpo

The watch is powered by a quartz movement and requires a battery. When the watch stops or the Indiglo light dims significantly, the battery may need replacement. It is recommended to have the battery replaced by an authorized TIMEX service center to ensure proper sealing and water resistance.

2. Ninu

Clean your watch regularly with a soft, dry cloth. For water-resistant models, a slightly damp cloth can be used, followed by drying. Avoid using chemical cleaners or abrasive materials.

3. Omi Resistance

This watch has a water resistance depth of 100 Mita. This means it is suitable for swimming and snorkeling, but not for high-impact water sports or diving. Ensure the crown is fully pushed in before any contact with water. Do not operate the pushers or crown while the watch is wet.

Laasigbotitusita

1. Wo Ko Ṣiṣe

• Ensure the crown is fully pushed into the normal operating position.
• If the watch still does not run, the battery may need to be replaced.

2. Awọn ọwọ Chronograph Ko Tunto si odo

Refer to the "Chronograph Hand Reset" section under Setup for detailed instructions on how to recalibrate the chronograph hands.

3. Indiglo Not Working

• Ensure the battery is not low. A dim or non-functional Indiglo is often an indicator of a low battery.
• Press and hold the crown firmly.

Awọn pato

Atilẹyin ọja ati Support

Alaye atilẹyin ọja

Ọja yi wa pẹlu kan 1 Odun olupese atilẹyin ọja from the date of purchase. To claim your warranty, you must produce either the original bill copy/invoice or the warranty card at any authorized Timex service center.

Onibara Support

For any service-related inquiries or feedback, please contact Timex India customer support:

• Nọmba ti kii ṣe owo: 1800 419 2727 (Monday to Sunday, 10:00 am to 7:00 pm, except government holidays)
• Imeeli: custservice@timexindia.com, feedback@timexindia.com

Image: A leaflet displaying Timex repair and service center contact information for various regions.