Geberit PushControl Bathtub Drain and Overflow Unit Model 151.603 Instruction Manual

1. Ifihan

This manual provides detailed instructions for the installation, operation, and maintenance of your Geberit PushControl Bathtub Drain and Overflow Unit, Model 151.603. This unit is designed for bathtubs with depths ranging from 17 to 24 inches and features a 27-inch stainless steel cable for reliable operation. Please read this manual thoroughly before installation and use to ensure proper function and safety.

The Geberit PushControl system offers a convenient push-button mechanism for opening and closing the bathtub drain, providing a clean and modern aesthetic for your bathroom.

2. Alaye Aabo

IKILO: Failure to follow these safety instructions could result in property damage, personal injury, or death.

• Always turn off the water supply before beginning any plumbing work.
• Wọ ohun elo aabo ti ara ẹni ti o yẹ, gẹgẹbi awọn gilaasi aabo ati awọn ibọwọ, lakoko fifi sori ẹrọ.
• Rii daju pe gbogbo awọn asopọ wa ni aabo ati omi lati yago fun awọn n jo.
• Ti o ko ba ni idaniloju nipa eyikeyi apakan ti ilana fifi sori ẹrọ, kan si alagbawo plumber ti o peye.
• Pa awọn ẹya kekere kuro ni arọwọto awọn ọmọde lati dena awọn eewu gbigbọn.

3. Package Awọn akoonu

Daju pe gbogbo awọn paati wa ṣaaju ki o to bẹrẹ fifi sori:

• Geberit PushControl Bathtub Drain and Overflow Unit (Model 151.603)
• Brass trim (Polished Chrome)
• Irin alagbara, irin strainer
• 27" stainless steel cable (Teflon coated)
• Ohun elo fifi sori ẹrọ
• Gaskets and fasteners

4. Awọn pato

5. fifi sori

Before you begin, ensure you have all necessary tools and that the water supply to the bathtub is turned off. Refer to local plumbing codes for specific requirements.

5.1 Awọn irinṣẹ ti a beere

• Plumber ká putty tabi silikoni sealant
• Adjustable wrench or channel locks
• Screwdriver (Phillips ati flathead)
• Teepu wiwọn
• Awọn gilaasi aabo ati awọn ibọwọ

5.2 Igbesẹ-nipasẹ-Igbese fifi sori

1. Mura balùwẹ̀: Ensure the bathtub drain and overflow holes are clean and free of debris. The overflow hole should be between 2" and 2-1/2" in diameter.
2. Install the Drain Shoe: Apply plumber's putty or silicone sealant around the underside of the drain flange. Insert the drain flange into the bathtub drain hole from the inside of the tub. From underneath the tub, attach the drain shoe assembly, ensuring the gasket is properly seated. Tighten securely with an adjustable wrench.
3. Install the Overflow Assembly: Position the overflow gasket on the back of the overflow plate. Insert the overflow pipe assembly into the overflow hole from the outside of the tub. Align the overflow plate with the overflow hole from the inside of the tub and secure it with the provided screw. Ensure the cable is routed correctly and not kinked.
4. So okun pọ: Connect the 27" stainless steel cable to both the drain stopper mechanism and the PushControl overflow trim. Follow the specific instructions provided with the unit for proper cable attachment and adjustment. The installation tool included will assist with this step.
5. Connect to Waste Pipe: Connect the 1-1/2" tubular piping of the drain and overflow unit to your existing waste pipe system. Ensure all connections are tight and sealed to prevent leaks.
6. Idanwo fun Leaks: Fill the bathtub with water and check all connections for any signs of leakage. Operate the PushControl mechanism several times to ensure the drain stopper opens and closes smoothly.

Image 1: Geberit PushControl Bathtub Drain and Overflow Unit (Model 151.603) showing the polished chrome trim and cable assembly. This image illustrates the main components of the unit.

6. Isẹ

The Geberit PushControl system is designed for simple and intuitive operation.

• Láti Ti Pa Ìṣàn Omi Pa: Firmly press the center of the overflow trim plate. The drain stopper will move into the closed position, allowing the tub to fill with water.
• Láti Ṣí Ìṣàn Omi: Firmly press the center of the overflow trim plate again. The drain stopper will release, allowing water to drain from the tub.

Ensure the mechanism operates smoothly. If you experience resistance, refer to the Troubleshooting section.

7. Itọju

Regular cleaning and maintenance will ensure the longevity and proper function of your Geberit PushControl unit.

• Cleaning the Trim: Clean the polished chrome trim with a soft cloth and mild, non-abrasive cleaner. Avoid harsh chemicals, abrasive pads, or acidic cleaners, as these can damage the finish.
• Cleaning the Drain: Periodically remove the drain stopper and clean any hair or debris that may have accumulated in the drain opening.
• Ayẹwo USB: Annually inspect the stainless steel cable for any signs of wear or damage. While the cable is Teflon coated for durability, extreme conditions or improper use can cause wear.

8. Laasigbotitusita

If problems persist after attempting these solutions, please contact Geberit customer support or a qualified plumber.

9. Atilẹyin ọja ati Support

Geberit products are manufactured to the highest quality standards and come with a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Geberit webojula.

For technical assistance, replacement parts, or further support, please contact Geberit customer service:

• Webojula: www.geberit.com
• Iṣẹ onibara: Refer to the Geberit webaaye fun alaye olubasọrọ agbegbe.

Nigbati o ba kan si atilẹyin, jọwọ ni nọmba awoṣe ọja rẹ (151.603) ati ọjọ rira wa.