1. Ifihan ati Loriview
The BONECO Air-O-Swiss 7147 Ultrasonic Humidifier is designed to provide optimal humidification for both office and home environments. This unit features an integrated hygrostat for automatic humidity adjustment, variable mist control, and a double jet nozzle for efficient mist distribution. Key features include a multifunction digital display, programmable hygrostat, three performance levels, a Sleep Mode for quiet night-time operation, and a timer function.
Awọn ẹya pataki:
- High Output: Up to 3 gallons/24 hours for rooms up to 600 sq ft.
- Auto Mode for fully automated operation.
- Iṣẹ́ ìkọ̀kọ̀-ìdákẹ́jẹ́ẹ́.
- Optional warm or cool mist.
- Digital display and programmable hygrostat.

The humidifier is shown in a typical room environment, placed on a table, indicating its compact size and how it blends into home or office decor while operating.
Ọja Pariview Fidio:
Yi fidio pese ohun loriview of the BONECO Air-O-Swiss 7147 Ultrasonic Humidifier, highlighting its key features and operation, including warm or cool mist options, auto mode, and digital display.
2. Awọn ilana aabo
Please read and follow all safety instructions before operating the humidifier to prevent injury or damage.
- Always place the humidifier on a firm, flat, water-resistant surface at least 3 feet away from walls and heat sources.
- Maṣe fi omi inu ipilẹ sinu omi tabi awọn omi miiran.
- Unplug the unit before filling, cleaning, or performing any maintenance.
- Ma ṣe ṣiṣẹ ọriniinitutu pẹlu okun ti o bajẹ tabi pulọọgi.
- Jeki kuro ni arọwọto awọn ọmọde ati awọn ohun ọsin.
- Use only clean, cool tap water. Distilled or demineralized water is recommended to reduce white dust.
- Do not add essential oils or other additives directly into the water tank or base, as this may damage the unit and void the warranty.
- Ensure the water tank cap is securely tightened before placing it on the base.
3. Eto
Follow these steps for initial setup of your BONECO Air-O-Swiss 7147 Humidifier:
- Yọọ kuro: Farabalẹ yọ gbogbo awọn ohun elo apoti kuro ki o rii daju pe gbogbo awọn paati wa.
- Ibi: Place the humidifier on a level, stable surface. Ensure it is not directly on carpet or near sensitive electronics.
- Yọ ojò omi kuro: Lift the water tank from the base unit.
- Kun Omi Omi: Unscrew the tank cap and fill the tank with clean, cool tap water. For best results and to minimize white dust, use distilled or demineralized water. Securely screw the cap back on.
- Fi Katiriji Isọdipupo sii: Ensure the demineralization cartridge is properly seated in the base unit. This cartridge helps reduce mineral content in the water.
- Place Water Tank: Carefully place the filled water tank back onto the base unit.
- So agbara: Plug the power cord into a suitable electrical outlet. The unit will beep, and the display will illuminate.

This image shows the BONECO Air-O-Swiss 7147 Ultrasonic Humidifier with its water tank lifted, revealing the demineralization cartridge in the base unit. This cartridge helps reduce mineral deposits.
4. Isẹ
The BONECO Air-O-Swiss 7147 offers various settings for personalized humidification.
Ibi iwaju alabujuto:

A alaye view of the humidifier's control panel, featuring a digital display showing the current humidity level and various function buttons for mist output, auto mode, sleep mode, and warm mist.
- Bọtini agbara: Tẹ lati tan-an tabi PA kuro.
- Eto ọriniinitutu: Use the humidity button to set your desired relative humidity level (e.g., 40% to 60%). The unit will automatically maintain this level.
- Ipele Ijade owusu: Adjust the mist output intensity (low, medium, high) using the dedicated button.
- Iṣẹ́ Àìsàn Omi Gbóná: Press the warm mist button to activate the pre-heating function for a comfortable warm mist.
- Ipo Aifọwọyi: Select Auto Mode for fully automated operation. The humidifier will adjust its output to maintain an optimal humidity level based on the ambient temperature.
- Ipo orun: Activates a low-noise operation mode, ideal for night-time use. The display brightness may also be reduced.
- Iṣẹ Aago: Set a timer for the humidifier to operate for a specific duration before automatically turning off.

This image illustrates the humidifier actively releasing mist from its double jet nozzle, demonstrating its humidification function.
5. Itọju
Regular maintenance ensures optimal performance and longevity of your humidifier. Always unplug the unit before cleaning.
Itọju Ojoojumọ:
- Ṣatunkun ojò omi pẹlu omi tutu.
- Mu ese ita ti kuro pẹlu asọ, damp asọ.
Itọju Ọsẹ:
- Mọ Omi Omi: Remove the water tank, unscrew the cap, and rinse thoroughly with warm water. Use a soft brush if necessary to remove any residue.
- Clean the Base Unit: Empty any remaining water from the base. Wipe the inside of the base with a soft cloth. Pay attention to the ultrasonic membrane and ensure it is free of mineral deposits.
- Fifọ: Use a descaling solution (such as BONECO EZCal or Urnex DEZcal) to remove mineral buildup from the ultrasonic membrane and heating element (if using warm mist). Follow the descaling product's instructions carefully.
- Ẹjẹ Hydro: Rinse the Hydro Cell under running water. Replace the Hydro Cell every 1-2 months, depending on water quality and usage.
- Katiriji Demineralization: Replace the demineralization cartridge every 2-3 months, or when white dust becomes noticeable. You can also refill the cartridge with demineralization granules.
Note: Do not use harsh chemicals, abrasive cleaners, or metal tools for cleaning, as these can damage the unit.
6. Laasigbotitusita
Ti o ba pade awọn iṣoro pẹlu ẹrọ humidifier rẹ, wo awọn iṣoro ati awọn solusan ti o wọpọ wọnyi:
- Ko si Abajade owusu:
- Ṣàyẹ̀wò bóyá táǹkì omi náà ti ṣófo. Tún un kún tí ó bá pọndandan.
- Ensure the water tank is correctly seated on the base.
- Clean the ultrasonic membrane. Mineral buildup can obstruct mist production.
- Verify the unit is plugged in and powered on.
- Excessive White Dust:
- This indicates high mineral content in your water. Use distilled or demineralized water.
- Replace or refill the demineralization cartridge.
- Ariwo Dani:
- Rii daju pe ẹyọ wa lori alapin, dada iduroṣinṣin.
- Check for any foreign objects in the water tank or base.
- A slight bubbling sound is normal as water flows from the tank to the base.
- Sisun omi:
- Rii daju pe fila ojò omi ti di wiwọ ni aabo.
- Check for cracks or damage to the water tank or base.
- Má ṣe kún inú ojò omi ju bí ó ti yẹ lọ.
- Kika ọriniinitutu ti ko pe:
- Ensure the humidifier is not placed too close to a wall, window, or another heat/cold source, which can affect sensor readings.
- Clean the humidity sensor (refer to the detailed manual for location).
If the problem persists after trying these solutions, please refer to the warranty and support section.
7. Awọn pato
Technical details for the BONECO Air-O-Swiss 7147 Ultrasonic Humidifier:

A table detailing the technical specifications of the humidifier, including electrical voltage, power consumption, humidity output, suitable room size, dimensions, weight, noise level, and included accessories.
| Sipesifikesonu | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Brand | BONECO |
| Orukọ awoṣe | BE7145 (also known as 7147) |
| Nọmba Awoṣe Nkan | 36430 |
| Ipo Isẹ | Ultrasonic |
| Itanna Voltage | 120V / 60Hz |
| Agbara agbara | 40 W (125 W with pre-heating) |
| Imujade Ọriniinitutu | Up to 3.5 gallons / 24 hours |
| Suitable for Rooms Up To | 600 square ft (55 m²) |
| Awọn iwọn (LxWxH) | 14 x 11.56 x 11.56 inches (approx. 9.5 x 10.3 x 12.2 inches / 24 x 26 x 31 cm) |
| Iwuwo Nkan (sofo) | 9 pounds (approx. 6.6 lbs / 3 kg) |
| Ipele Ariwo isẹ | <25 dB(A) |
| Agbara Omi | 3 galonu |
| Awọn ẹya ẹrọ To wa | Hydro Cell, Demineralization cartridge |
8. Atilẹyin ọja ati Support
The BONECO Air-O-Swiss 7147 Ultrasonic Humidifier comes with a 3-odun atilẹyin ọjaAtilẹyin ọja yi bo awọn abawọn ninu awọn ohun elo ati iṣẹ-ṣiṣe labẹ lilo deede ile.
For warranty claims, technical assistance, or to purchase replacement parts and accessories, please contact BONECO customer support. Keep your proof of purchase for warranty validation.