InFocus IN112 Portable DLP Projector User Manual

1. Ifihan

This manual provides essential information for the safe and efficient operation of your InFocus IN112 Portable DLP Projector. Please read these instructions thoroughly before using the projector and retain them for future reference.

The InFocus IN112 is designed for versatile use, offering high brightness and a strong contrast ratio. It incorporates BrilliantColor technology for clear image reproduction and is 3D-ready. Its compact and lightweight design facilitates easy portability and installation.

2. Ohun ti o wa ninu Apoti

Daju pe gbogbo awọn nkan ti a ṣe akojọ rẹ si isalẹ wa ninu apoti ọja rẹ:

• InFocus IN112 Projector
• Okun agbara
• RGB cable (VGA cable)
• A/V cable (Composite Video cable)
• Awọn ilana aabo
• Itọsọna olumulo (iwe yii)
• Isakoṣo latọna jijin

3. Pirojekito Overview

olusin 1: Top View - Displays the control panel with buttons for power, source selection, menu navigation, and keystone adjustment, along with the focus ring for the lens.

olusin 2: Apa View - Shows the ventilation grilles essential for heat dissipation during operation. Ensure these are not obstructed.

olusin 3: Angled View pẹlu Latọna - Illustrates the projector from an angle, highlighting the lens and the included remote control for convenient operation.

olusin 4: Ẹyìn View - Details the various input and output ports, including power, audio in/out, video, computer (VGA), RS232, and Mini USB.

4. Eto

4.1 Ibi

Position the projector on a stable, flat surface or mount it securely. Ensure adequate ventilation around the projector to prevent overheating. The distance from the screen will determine the image size. Adjust the projector's position to achieve the desired image size and clarity.

4.2 Asopọ agbara

1. So okun agbara ti a pese si agbawọle agbara pirojekito.
2. Pulọọgi opin miiran ti okun agbara sinu iṣan itanna ti o wa lori ilẹ.

4.3 Nsopọ Awọn orisun Input

The IN112 projector offers multiple input options:

• VGA (Computer In 1 & 2): Use the RGB cable to connect to a computer's VGA output.
• Fidio Apapo: Use the A/V cable to connect to devices with composite video output.
• S-Fidio: Connect to devices with S-Video output.
• Audio Ni: Connect external audio sources using a 3.5mm stereo cable.
• RS232C: For control and automation systems.
• USB B Mini: For control and firmware updates.

Rii daju pe gbogbo awọn kebulu ti sopọ ni aabo ṣaaju ṣiṣe agbara lori pirojekito.

5. Awọn ilana Iṣiṣẹ

5.1 Agbara Tan / Pa

• Lati mu agbara ṣiṣẹ, tẹ bọtini naa Agbara button on the control panel or remote control. The power indicator light will illuminate.
• Lati pa agbara, tẹ awọn Agbara button again. Confirm shutdown if prompted. Allow the projector to cool down before unplugging.

5.2 Aworan Atunṣe

• Idojukọ: Yi oruka idojukọ lori lẹnsi pirojekito titi ti aworan yoo jẹ didasilẹ ati ko o.
• Okuta okuta: Lo awọn Keystone buttons on the control panel or remote to correct trapezoidal image distortion if the projector is not perfectly perpendicular to the screen.

5.3 Orisun Aṣayan

Tẹ awọn Orisun button on the control panel or remote control to cycle through available input sources (VGA1, VGA2, Video, S-Video).

5.4 Lilọ kiri Akojọ aṣyn

Tẹ awọn Akojọ aṣyn/Jade button to access the on-screen display (OSD) menu. Use the arrow buttons to navigate and the Yan or Wọle button to confirm selections. Press Akojọ aṣyn/Jade lẹẹkansi lati pa akojọ aṣayan.

5.5 Ipo Eco

Activate Eco Mode to extend lamp life and reduce power consumption. This mode is suitable for environments with lower ambient light. The lamp life is approximately 6,000 hours in Eco Mode compared to 5,000 hours in normal mode.

5.6 3D Content Projection

The IN112 is 3D-ready. To project 3D content, you will need compatible 3D source material, a 3D-capable player, and active 3D glasses (sold separately). Refer to your 3D source device's manual for specific setup instructions.

6. Itọju

6.1 Lamp Rirọpo

Pirojekito lamp ni ipari igbesi aye. Nigbati lamp atọka (Temp/Lamp) illuminates or the image brightness significantly decreases, the lamp may need replacement. The lamp door is conveniently located on the top of the projector for easy access, even when installed.

Iṣọra: Ensure the projector is powered off and completely cooled before attempting lamp replacement. Refer to the detailed lamp replacement instructions in the full service manual for safety and proper procedure.

6.2 Ninu

The IN112 projector is designed without filters, eliminating the need for filter cleaning or replacement. Periodically wipe the exterior casing with a soft, dry cloth. For the lens, use a specialized lens cleaning cloth and solution to avoid scratches.

7. Laasigbotitusita

8. Awọn pato

9. Atilẹyin ọja ati Support

9.1 Atilẹyin ọja

The InFocus IN112 projector is backed by a comprehensive warranty:

• 5-odun lopin atilẹyin ọja lori pirojekito.
• Atilẹyin ọja kikun ọdun 2 covering parts and labor.
• 6-osu atilẹyin ọja lori lamp.

Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the official InFocus warranty documentation or visit the InFocus webojula.

9.2 Imọ Support

For technical assistance, troubleshooting, or service inquiries, please contact InFocus customer support. Contact information can typically be found on the InFocus official webaaye tabi ni awọn iwe ti o wa.

10. Related Product Information (IN130 Series)

Fidio atẹle naa pese alaye loriview of features found in the InFocus IN130 Series projectors. While specific models may vary, many core functionalities and design principles are shared across InFocus projector lines, offering general insight into InFocus projector capabilities.