Timex Intelligent Quartz Tide Temp Compass Watch User Manual

Ọja Pariview

The Timex Intelligent Quartz Tide Temp Compass Watch is a sophisticated timepiece designed for outdoor enthusiasts and everyday wear. It features a unique combination of analog displays for time, tide, temperature, and compass functions, powered by Timex's Intelligent Quartz technology. This manual provides detailed instructions for setting up, operating, and maintaining your watch.

olusin 1: Iwaju view of the Timex Intelligent Quartz Tide Temp Compass Watch.

Eto ati Iṣeto Ibẹrẹ

Before using your watch, it is important to perform the initial setup and calibration steps to ensure accurate readings for all functions.

1. Eto Akoko

To set the time, pull the crown out to the outermost position. Rotate the crown to adjust the hour and minute hands to the correct time. Push the crown back in to resume timekeeping.

2. Kompasi odiwọn

For accurate compass readings, the watch must be calibrated away from large metal objects and electronics. Follow these steps:

1. Place the watch on a level surface.
2. Fa ade jade si ipo aarin.
3. Once the indicator hand stops moving, press the left pusher.
4. Slowly rotate the watch for two complete revolutions. Each revolution should take at least 15 seconds.
5. Press either pusher once complete.

3. Setting Local Declination Angle

The declination angle is the difference between magnetic north and true north, which varies by location. To set your local declination angle:

1. With the crown still in the middle position (after compass calibration), press the top pusher to move the fourth hand west, or the bottom pusher to move the hand east.
2. Each short push adjusts the hand by one degree. Consult a local map or online resource for your area's specific declination angle.
3. Once set, return the crown to the original position.

Akiyesi: Fun example, in New York City, the declination angle is approximately 13 degrees west.

4. Tide and Temperature Calibration

Specific calibration steps for tide and temperature are typically detailed in the full user guide. Generally, tide tracking requires setting the current high or low tide for your location, and temperature readings are most accurate when the watch is off the wrist for a period to avoid body heat interference.

Awọn ilana Iṣiṣẹ

Using the Tide Tracker

The tide tracker counts down to high or low tide. Once calibrated to your local tide cycle, the sub-dial will indicate the current tide status, helping you plan activities near coastal areas.

Lilo Thermometer

The watch features a thermometer to measure air and water temperature. For accurate air temperature readings, remove the watch from your wrist and allow it to acclimate to the ambient temperature for at least 15-20 minutes.

Using the Analog Compass

After calibration and declination angle setting, the analog compass provides directional guidance. Hold the watch level and allow the compass hand to settle to determine your bearing.

Ìmọ́lẹ̀ Alẹ́ Indiglo

The Indiglo light-up watch dial illuminates the entire dial for easy readability in low-light conditions. Activate by pressing the crown.

Omi Resistance

This watch is water-resistant to 100 meters (330 feet). It is suitable for snorkeling and swimming, but not for diving. Avoid operating the pushers or crown while the watch is submerged to prevent water ingress.

Itoju

Ìtọ́jú tó yẹ yóò jẹ́ kí aago Timex rẹ pẹ́ títí, kí ó sì ṣiṣẹ́ dáadáa.

• Ninu: Fọ aago rẹ nigbagbogbo pẹlu asọ rirọ, damp cloth. For silicone straps, mild soap and water can be used. Ensure the watch is completely dry before wearing.
• Batiri: The watch requires 1 Lithium Metal battery (included). Battery life varies depending on usage of features like Indiglo. When the battery needs replacement, it is recommended to have it done by a qualified watch technician to ensure water resistance is maintained.
• Ibi ipamọ: Tọju aago rẹ ni itura, aye gbigbẹ kuro lati orun taara ati awọn iwọn otutu to gaju.
• Yago fun Awọn Ipa: While durable, avoid dropping the watch or subjecting it to severe impacts, which can damage internal components.

Laasigbotitusita

Tí o bá ní ìṣòro pẹ̀lú aago rẹ, gbìyànjú àwọn ìgbésẹ̀ yíì tí ó wọ́pọ̀ láti yanjú ìṣòro:

• Watch Not Functioning/Stopped: Check if the crown is fully pushed in. If the watch still does not operate, the battery may need replacement.
• Inaccurate Compass/Tide/Temperature: Re-perform the calibration steps detailed in the "Setup and Initial Configuration" section. Ensure you are away from magnetic interference when calibrating the compass.
• Ìrọ̀rùn lábẹ́ Kírísítàlì: This may indicate a loss of water resistance. Avoid further water exposure and seek professional service immediately.
• Awọn bọtini Ko Dahun: Ensure the crown is in the correct position for the desired function. If issues persist, a professional inspection may be required.

For persistent issues not resolved by these steps, please contact Timex customer support.

Awọn pato

Atilẹyin ọja ati Support

A ṣe àwọn aago Timex ní ìwọ̀n gíga, wọ́n sì ní àtìlẹ́yìn tó lopin. Fún àwọn àlàyé àtìlẹ́yìn pàtó, jọ̀wọ́ wo káàdì àtìlẹ́yìn tó wà nínú ohun tí o rà tàbí kí o lọ sí Timex. webojula.

For further assistance, technical support, or to download the complete user guide, please visit the official Timex support page or refer to the PDF user guide available online:

Ṣe igbasilẹ Itọsọna olumulo ni kikun (PDF)