9 Volt Metal Detector 6-inch Wand Scanner User Manual

Ọrọ Iṣaaju

This manual provides essential information for the safe and effective operation of your Cen-Tech 9 Volt Metal Detector 6-inch Wand Scanner. This device is designed to locate metal objects, particularly those embedded in wood, and can also serve as a security scanning tool. Please read this manual thoroughly before use and retain it for future reference.

Image: The Cen-Tech 9 Volt Metal Detector, a black handheld wand with yellow "CEN-TECH" branding.

Alaye Aabo

• Always operate the device in a safe manner.
• Ma ṣe fi ẹrọ naa han si awọn iwọn otutu to gaju tabi ọrinrin.
• Jeki kuro ni arọwọto awọn ọmọde.
• Sọ awọn batiri sọnu daradara ni ibamu si awọn ilana agbegbe.
• Má ṣe gbìyànjú láti ṣe àtúnṣe tàbí tún ẹ̀rọ náà ṣe fúnra rẹ. Tọ́ka sí àwọn òṣìṣẹ́ iṣẹ́ tó péye.

Package Awọn akoonu

• Cen-Tech 9 Volt Metal Detector Wand Scanner
• Ọran ipamọ
• Afowoyi Olumulo (iwe-ipamọ yii)

Note: A 9V battery is required for operation and is sold separately.

Eto: Fifi sori batiri

The Cen-Tech Metal Detector requires one 9-volt battery for operation.

1. Locate the battery compartment cover, typically on the handle or rear of the device.
2. Gbe tabi yọ ideri naa kuro lati ṣii yara naa.
3. Insert a fresh 9-volt battery, ensuring the positive (+) and negative (-) terminals align correctly with the connectors inside the compartment.
4. Rọpo ideri iyẹwu batiri ni aabo.
5. Ẹrọ naa ti ṣetan fun lilo.

Awọn ilana Iṣiṣẹ

Titan / Pipa agbara

• To turn the detector ON, slide the power switch to the "ON" position. You may hear a brief beep and see an LED light up, indicating it is active.
• To turn the detector PAA, slide the power switch to the "OFF" position.

Detecting Metal

• Hold the wand scanner by the handle and sweep the 6-inch wand head slowly and steadily over the area you wish to scan.
• When metal is detected, the device will emit an audio alarm (a distinct beeping sound) and/or activate the LED visual alert (a flashing light). The intensity of the alarm may increase as you get closer to the metal object.
• Pinpoint the exact location by narrowing your sweep area once an alarm is triggered.

Idinku ifamọ

• The detector features a 50% sensitivity reduction button. Press and hold this button to temporarily decrease the sensitivity of the detector. This is useful for scanning in areas with high levels of ambient metal or when trying to ignore smaller, less significant metal objects.
• Release the button to return to full sensitivity.

Itaniji Batiri Kekere

• The device is equipped with a low battery alert. When the battery power is low, the detector's performance may diminish, and a specific indicator (e.g., a continuous low tone or a specific LED pattern) will activate.
• Replace the 9-volt battery immediately when the low battery alert is active to ensure optimal performance.

Awọn ẹya ara ẹrọ

• Detects metal embedded in wood.
• May also be used as a security scan device.
• 6-inch wand for one-pass coverage.
• Audio alarm and LED visual alert.
• 50% sensitivity reduction button.
• Itaniji batiri kekere.
• Comes with a handy carrying case.

Itoju

• Ninu: Wipe the detector with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Ibi ipamọ: When not in use, store the detector in its provided carrying case in a cool, dry place, away from direct sunlight and extreme temperatures.
• Batiri: Yọ batiri naa kuro ti ẹrọ naa ko ba lo fun igba pipẹ lati dena jijo ati ibajẹ.

Laasigbotitusita

Awọn pato

Atilẹyin ọja ati Support

Cen-Tech products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or replacement parts, please refer to the warranty card included with your purchase or visit the official Cen-Tech webojula. Tọju iwe-ẹri rira rẹ bi ẹri rira fun eyikeyi awọn ibeere atilẹyin ọja.

For further assistance, you may contact Cen-Tech customer service through their official channels. Always provide your product model number (94138) when seeking support.