Ọrọ Iṣaaju
This manual provides essential information for the proper use, maintenance, and troubleshooting of your KOAMTAC KDC20/100/200 190mAh replacement battery. This battery is designed to provide reliable power for your KDC20, KDC100, and KDC200 series devices. For optimal performance, it is recommended to replace your KDC battery annually.
Alaye Aabo
Please read and understand all safety precautions before using the battery. Improper handling can lead to damage, injury, or fire.
- Má ṣe tú batiri náà ká, fọ́ ọ, gé e lulẹ̀, tàbí kí o fi ẹ̀rọ gé e kúrú.
- Do not expose the battery to high temperatures (above 60°C / 140°F) or direct sunlight.
- Ma ṣe sọ batiri naa sinu ina tabi omi.
- Jeki batiri kuro lati ọdọ awọn ọmọde.
- Tí bátìrì bá ń jò, má ṣe fi ara kan awọ ara àti ojú. Tí ó bá kan ara, fi omi wẹ̀ ẹ́ lẹ́sẹ̀kẹsẹ̀ kí o sì wá ìtọ́jú ìṣègùn.
- Use only the specified charger for your KDC device to charge this battery.
Image: The KDC20/100/200 190mAh battery installed in a compatible device. Note the caution label on the device indicating "LASER RADIATION - DO NOT STARE INTO BEAM" for devices with laser components. This image highlights the proper placement of the battery within the device's battery compartment.
Eto: Fifi sori batiri
Follow these steps to properly install the 190mAh battery into your KDC20, KDC100, or KDC200 series device.
- Ensure your KDC device is powered off before beginning the installation.
- Locate the battery compartment on the back of your KDC device.
- If an old battery is present, carefully remove it.
- Align the new 190mAh battery with the battery compartment, ensuring the connector pins on the battery match the receptacle in the device.
- Gently push the battery into place until it is securely seated and the connector is fully engaged.
- Close the battery compartment cover, if applicable, ensuring it latches securely.
Image: The KOAMTAC KDC20/100/200 190mAh replacement battery. This image shows the compact blue battery pack with its small white connector and red and black wires, ready for installation into a compatible KDC device.
Iṣiṣẹ: Gbigba agbara ati lilo
Once installed, the battery will power your KDC device. Follow these guidelines for charging and optimal usage.
Ngba agbara si Batiri naa
- Connect your KDC device to its original charger or a compatible charging cradle.
- The device's indicator light will typically show charging status (refer to your KDC device's specific manual for details).
- Allow the battery to fully charge before initial use for best performance.
- Avoid overcharging the battery by disconnecting the charger once it is full.
Lilo Batiri
- The 190mAh capacity provides sufficient power for typical operation of KDC20/100/200 devices.
- Battery life will vary depending on device usage, settings, and environmental conditions.
- For prolonged storage, charge the battery to approximately 50% and store it in a cool, dry place.
Itoju
Itọju to peye le fa igbesi aye batiri rẹ gun.
- Keep the battery contacts clean and free of dust or debris. Use a dry, soft cloth if cleaning is necessary.
- Avoid extreme temperatures. Do not expose the battery to very hot or very cold environments.
- If the battery is not used for an extended period, charge it periodically (every 3-6 months) to prevent deep discharge.
- Replace the battery if you notice a significant decrease in operating time or if it shows signs of swelling or damage.
Laasigbotitusita
Tí o bá ní ìṣòro pẹ̀lú bátìrì rẹ, ronú nípa àwọn ọ̀nà tí ó wọ́pọ̀ wọ̀nyí:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ẹrọ naa ko tan-an lẹhin fifi sori batiri. | Battery not properly seated or not charged. | Ensure battery is fully inserted. Charge the device for at least 30 minutes. |
| Batiri n ṣan ni kiakia. | Aging battery, heavy device usage, or environmental factors. | Reduce device usage intensity. Consider replacing the battery if it's old (recommended annually). Ensure device firmware is up to date. |
| Batiri ko ngba agbara. | Faulty charger/cable, dirty contacts, or damaged battery. | Try a different charger/cable. Clean battery and device contacts. If problem persists, the battery may need replacement. |
If troubleshooting steps do not resolve the issue, please contact KOAMTAC customer support.
Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Nọmba awoṣe | 674500 |
| Agbara Batiri | 190 mAh |
| Voltage | 3.7 Volts |
| Batiri Cell Tiwqn | Acid Lead ti a ti di |
| Ọja Mefa | 2 x 2 x 1 inches |
| Iwọn Nkan | 8 iwon |
| Olupese | KOAMTAC |
Alaye atilẹyin ọja
KOAMTAC provides a limited warranty for its products. For specific warranty terms and conditions applicable to the KDC20/100/200 190mAh battery, please refer to the official KOAMTAC webaaye tabi kan si atilẹyin alabara wọn taara. Jeki ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.
Onibara Support
For further assistance, technical support, or inquiries regarding your KOAMTAC KDC20/100/200 190mAh battery, please contact KOAMTAC customer support through their official channels.
- Webojula: www.koamtac.com
- Ibi iwifunni: Refer to the "Contact Us" section on the official KOAMTAC website for phone numbers, email addresses, and support hours.
