RAB Lighting FFLED39 Future Flood LED Light User Manual

1. Ọja Ipariview

The RAB Lighting FFLED39 Future Flood LED Light is a high-performance, energy-efficient outdoor floodlight designed for various applications. This hardwired fixture features a durable bronze finish and provides cool white illumination.

Figure 1: RAB Lighting FFLED39 Future Flood LED Light

Awọn ẹya pataki:

• Agbara: LED 39-watt
• Iwọn awọ: 5100K Cool White
• Igbesi aye: 100,000 hours based on LM-80 tests
• Awọn LED: Three multi-chip 13-watt high-performance LEDs
• Optics: NEMA type 7H x 6V with Air-flow technology heatsink
• Olufihan: Semi-specular anodized aluminum
• Awọn apoti: Silikoni iwọn otutu ti o ga
• Pari: Bronze chip and fade-resistant polyester powder coat
• Voltage: 120-volt to 277-volt operation

2. Alaye Aabo

Read all instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards. Keep this manual for future reference.

• Aabo Itanna: Installation must be performed by a qualified electrician in accordance with all national and local electrical codes. Ensure power is disconnected at the circuit breaker before installation or servicing.
• Ilẹ: The fixture must be properly grounded to prevent potential electric shock.
• Iṣagbesori: Ensure the mounting surface is structurally sound and capable of supporting the fixture's weight (approximately 10.23 lbs).
• Iwọn Iṣiṣẹ: Má ṣe lo ohun èlò náà ní ìta ibi tí ó ti yẹ kí ó wà ní ìwọ̀n otútù tí a yàn.
• Awọn LED: Do not stare directly into the LED light source when the fixture is operating, as this may cause eye damage.

3. fifi sori

This floodlight is designed for wall mounting and requires hardwired installation. Professional installation is recommended.

Awọn irinṣẹ ti a beere:

• Screwdriver (Phillips ati flathead)
• Waya strippers
• Pliers
• Lílu (tí ilẹ̀ ìfìsókòó bá nílò ihò atọ́kọ̀)
• adijositabulu wrench

Awọn aṣayan iṣagbesori:

The FFLED39 supports various mounting options. The standard fixture comes with a wall mount. Optional accessories may include slipfitter mounts or other specialized brackets.

Olusin 2: Example of a Slipfitter Mount (optional accessory)

Awọn igbesẹ fifi sori ẹrọ:

1. Ge Agbara: Turn off power at the circuit breaker before beginning installation. Verify power is off using a voltage idanwo.
2. Ṣetan Ilẹ Iṣagbesori: Securely attach the mounting bracket to the desired wall location. Ensure the bracket is level and firmly fastened.
3. Awọn isopọ Waya:
   • Connect the black wire from the fixture to the hot (L) wire from the power supply.
   • Connect the white wire from the fixture to the neutral (N) wire from the power supply.
   • Connect the green or bare copper wire from the fixture to the ground wire from the power supply.
   • Use appropriate wire connectors and ensure all connections are secure.
4. Òkè Ńlá: Attach the FFLED39 fixture to the mounting bracket. Secure it with the provided screws or bolts.
5. Ṣatunṣe Ero: Loosen the adjustment screws on the fixture to aim the light as desired. Tighten the screws firmly once the desired angle is achieved.
6. Pada Agbara pada: Turn on power at the circuit breaker. Test the fixture for proper operation.

4. Isẹ

The RAB Lighting FFLED39 is a hardwired floodlight. Its operation is typically controlled by an external switch or a photocell (if installed).

Iṣe Didara:

• Once installed and wired, the fixture will illuminate when power is supplied via the connected wall switch or control system.
• Ensure the power source is within the specified 120-277V range.

Photocell Control (Optional):

If a photocell is integrated or installed with the fixture, the light will automatically turn on at dusk and off at dawn, based on ambient light levels.

Olusin 3: Example of a Photocell (optional accessory)

5. Itọju

The FFLED39 LED floodlight is designed for minimal maintenance due to its long-life LED components and durable construction.

Ninu:

• Òde: Lorekore nu ode ti imuduro pẹlu asọ, damp aṣọ láti mú ẹrẹ̀, eruku, àti ìdọ̀tí kúrò. Má ṣe lo àwọn ohun ìfọṣọ tàbí àwọn ohun èlò ìfọṣọ.
• Lẹnsi: Gently wipe the lens with a clean, soft cloth to ensure maximum light output.

Ayewo:

• Periodically inspect the fixture for any signs of damage, loose connections, or wear.
• Rí i dájú pé gbogbo ohun èlò ìfipamọ́ wà ní ìdúróṣinṣin àti ní ààbò.
• If any damage is observed, disconnect power and contact a qualified electrician for repair or replacement.

6. Laasigbotitusita

If you experience issues with your FFLED39 floodlight, refer to the following troubleshooting guide:

If the problem persists after following these steps, contact RAB Lighting customer support or a qualified electrician.

7. Awọn pato

Detailed technical specifications for the RAB Lighting FFLED39 Future Flood LED Light:

Figure 4: Indication of 100,000-hour LED lifespan

8. Atilẹyin ọja ati Support

Atilẹyin ọja ti Olupese:

The RAB Lighting FFLED39 Future Flood LED Light is covered by a 1-odun olupese ká atilẹyin ọja láti ọjọ́ tí a rà á. Àtìlẹ́yìn yìí bo àwọn àbùkù nínú àwọn ohun èlò àti iṣẹ́ ọwọ́ lábẹ́ lílo àti iṣẹ́ déédéé.

The warranty does not cover damage resulting from improper installation, accident, misuse, abuse, negligence, or unauthorized modification or repair.

Atilẹyin Onibara:

For technical assistance, warranty claims, or further information, please contact RAB Lighting customer support. Refer to the official RAB Lighting webaaye fun lọwọlọwọ olubasọrọ awọn alaye.