Ọrọ Iṣaaju
This manual provides comprehensive instructions for the setup, operation, and maintenance of your THOMSON CT390 Dual Alarm Clock Radio with Projector. Please read this manual carefully before using the device to ensure proper function and to maximize your user experience. Keep this manual for future reference.
Ọja Pariview
The THOMSON CT390 is a versatile clock radio featuring dual alarms, a weekend mode, and a time projection function. It includes an FM/MW radio tuner and a clear digital display.
Awọn ẹya pataki:
- Digital FM/MW Radio Tuner
- Dual Alarm Function with Snooze
- Weekend Mode for Alarm Deactivation
- Time Projection onto Wall or Ceiling
- Ko LED Ifihan
Awọn Irinṣẹ Ọja:
Refer to the image below for a visual guide to the main components of your CT390 unit.
Aworan 1: Iwaju view of the THOMSON CT390 Dual Alarm Clock Radio. This image displays the digital display, control buttons, and the projector lens on the side.
Typical components include the main display, various control buttons (e.g., Time Set, Alarm 1/2, Radio, Volume, Snooze/Dimmer), a projector lens, a speaker, and a power input port.
Ṣeto
- Ṣii silẹ: Carefully remove the clock radio from its packaging. Retain the packaging for future transport or storage.
- Asopọ agbara: Connect the power adapter to the DC input jack on the back of the unit, then plug the adapter into a standard wall outlet. The display will light up.
- Àfikún Bátírì (Àṣàyàn): For time and alarm settings retention during a power outage, insert 2 x AAA batteries (not included) into the battery compartment on the bottom of the unit. Ensure correct polarity (+/-).
- Eto Aago Ibẹrẹ:
- Tẹ mọlẹ Akoko SET bọtini. Awọn nọmba wakati yoo filasi.
- Lo awọn WAKATI ati ISEJU awọn bọtini lati ṣatunṣe akoko.
- Tẹ Akoko SET lẹẹkansi lati jẹrisi ati jade.
Awọn ilana Iṣiṣẹ
Ṣíṣeto Awọn Itaniji (Alarm 1 ati Itaniji 2):
- Tẹ mọlẹ OOGUN 1 or OOGUN 2 Bọ́tìnì náà. Àwọn nọ́mbà wákàtí ìkìlọ̀ náà yóò máa tàn yanranyanran.
- Lo awọn WAKATI ati ISEJU awọn bọtini lati ṣeto akoko itaniji ti o fẹ.
- Tẹ OOGUN 1 or OOGUN 2 again to select the alarm source (Buzzer or Radio). An indicator will appear on the display.
- Press the respective alarm button one more time to confirm and exit.
- To activate/deactivate an alarm, briefly press the OOGUN 1 or OOGUN 2 button until the alarm indicator appears or disappears.
Ipo Ipari Ọsẹ:
The Weekend Mode allows you to disable alarms on Saturday and Sunday automatically without having to manually turn them off. To activate/deactivate Weekend Mode:
- Tẹ awọn OPIN OSE button. A "WEEKEND" indicator will appear on the display when active.
- Press it again to deactivate.
Isẹ Redio:
- Titan/Pa: Tẹ awọn RADIO TAN/PA bọtini lati tan redio tabi pa.
- Yiyi:
- Tẹ awọn TUNTUN +/- awọn bọtini lati ṣe atunṣe pẹlu ọwọ si igbohunsafẹfẹ ti o fẹ.
- Tẹ mọlẹ TUNTUN +/- for automatic scanning to the next available station.
- Iṣakoso iwọn didun: Lo awọn Idibo +/- buttons to adjust the sound level.
- Eriali: Extend the FM wire antenna fully for optimal reception. For MW reception, rotate the unit for best signal.
Isọtẹlẹ akoko:
The projector allows you to display the current time onto a wall or ceiling.
- Mu Isọtẹlẹ ṣiṣẹ: Tẹ awọn PATAKI TAN/PA bọtini lati tan tabi pa asọtẹlẹ naa.
- Ṣatunṣe Igun: Rotate the projector lens barrel to adjust the projection angle.
- Idojukọ: Yí òrùka ìfọwọ́sowọ́pọ̀ yí ká lẹ́ńsì àwòrán láti mú àwòrán tí a gbé kalẹ̀.
Snooze and Display Dimmer:
- Sun Nigbati itaniji ba ndun, tẹ awọn ṢEGBE button to temporarily silence it for approximately 9 minutes. The alarm will sound again after this period.
- Ṣe afihan Dimmer: Ni ipo ifihan akoko deede, tẹ bọtini naa DIMMER button (often combined with Snooze) to adjust the brightness of the display. Cycle through available brightness levels.
Itoju
- Ninu: Lo asọ asọ ti o gbẹ lati nu ode ti ẹyọ naa. Ma ṣe lo awọn afọmọ abrasive, waxes, tabi awọn nkanmimu.
- Eruku: Keep the projector lens free from dust for clear projection. Use a soft lens cloth if necessary.
- Ibi: Place the unit on a stable, flat surface away from direct sunlight, heat sources, and excessive moisture. Ensure adequate ventilation.
- Rirọpo Batiri: If using battery backup, replace batteries annually or when the display shows signs of fading during a power outage.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ẹka ko ni agbara lori. | Adaparọ agbara ko sopọ tabi aṣiṣe. | Rí i dájú pé ohun tí a fi ń so agbára náà mọ́ ẹ̀rọ náà dáadáa àti ibi tí ó ń ṣiṣẹ́ lórí ògiri. |
| Itaniji ko dun. | Alarm not activated, wrong time set, or Weekend Mode active. | Verify alarm is active (indicator on display). Check alarm time. Deactivate Weekend Mode if necessary. |
| Gbigba redio ti ko dara. | Antenna not extended, interference, or weak signal. | Fully extend the FM wire antenna. For MW, rotate the unit. Move away from other electronic devices. |
| Akoko akanṣe jẹ blurry. | A ko ṣatunṣe idojukọ pirojekito naa. | Rotate the focus ring around the projector lens until the image is clear. |
| Atunse akoko/eto lẹhin agbara outage. | Ko si awọn batiri tabi awọn batiri afẹyinti ti o ti pari. | Fi awọn batiri AAA tuntun sinu apo batiri naa. |
Awọn pato
| Brand: | Thomson |
| Nọmba awoṣe: | CT390 |
| Àwọ̀: | Dudu |
| Awọn ẹgbẹ Redio ti o ni atilẹyin: | FM, MW |
| Iwọn ipo igbohunsafẹfẹ FM: | 87.5 - 108 MHz |
| Ijade Agbara RMS: | 0.25 W |
| Asopọmọra: | USB (for charging, not data) |
| Awọn ẹya pataki: | Calendar Display, Dual Alarm, Radio, Time Projector |
| Orisun Agbara: | Cable ina |
| Ìwọ̀n Nkan: | 450 giramu |
Atilẹyin ọja ati Support
For warranty information, please refer to the warranty card included with your product or visit the official Thomson website. Technical support and customer service contact details can typically be found on the manufacturer's webaaye tabi ni apoti ọja.
Note: Information regarding spare parts availability and software updates is not available at this time.