1. Ifihan
This manual provides essential information for the safe and efficient installation, operation, and maintenance of the Legrand CX³ Power Contactor, model 412505. Please read this manual thoroughly before using the product and retain it for future reference.
The Legrand CX³ Power Contactor 412505 is designed for controlling electrical circuits, conforming to standard NF EN 61095. It is compatible with up to 25 A comb-shaped bus bars.
2. Alaye Aabo
IKILO: Electrical shock hazard. Installation and maintenance should only be performed by qualified personnel. Disconnect all power before working on the contactor or connected circuits.
- Máa tẹ̀lé àwọn òfin iná mànàmáná ti agbègbè àti ti orílẹ̀-èdè nígbà gbogbo.
- Ensure the power supply matches the contactor's specifications.
- Ma ṣe ṣisẹ olubasọrọ ti o ba han ti bajẹ.
- Wọ ohun elo aabo ti ara ẹni ti o yẹ (PPE).
3. Apejuwe ọja ati Awọn ẹya ara ẹrọ
The Legrand CX³ Power Contactor 412505 is a compact and reliable device for switching electrical loads. Key features include:
- Awoṣe: 412505
- Coil Voltage: 24V
- Rated Current (I Max): 25 Amps
- Oṣuwọn Voltage: 250V (Bipolar)
- Iru olubasọrọ: 2 Normally Open (2F)
- Nọmba Awọn Modulu: 1
- Iṣagbesori: DIN Rail Oke
- Iwọn Idaabobo: IP20
- Ohun elo: Kunststoff (housing), Copper (contacts)
4. Eto ati fifi sori
The contactor is designed for DIN rail mounting. Follow these steps for installation:
- Ge asopọ agbara: Ensure all power to the circuit is disconnected at the main breaker. Verify with a voltage idanwo.
- Iṣagbesori: Clip the contactor onto a standard DIN rail. Ensure it is securely fastened.
- Wiring (Power Circuit):
- Connect the incoming power lines to the main terminals (e.g., L1, L2).
- Connect the load lines to the outgoing terminals (e.g., T1, T2).
- Ensure all connections are tight using the clamp asopo ohun iru.
- Wiring (Control Circuit):
- Connect the 24V control voltage to the coil terminals (A1, A2).
- The control method is remote, typically via a switch or control system.
- Ìmúdájú: Ṣàyẹ̀wò gbogbo àwọn wáyà láti rí i pé wọ́n péye àti pé wọ́n ní ààbò kí o tó dá agbára padà.
5. Awọn ilana Iṣiṣẹ
The Legrand CX³ Power Contactor 412505 operates in an ON-OFF mode, controlled by its 24V coil.
- Muu ṣiṣẹ: Apply 24V DC or AC (depending on coil type, typically AC for contactors unless specified) to the coil terminals (A1 and A2). This will energize the coil, closing the main contacts and allowing power to flow to the connected load.
- Pa aṣiṣẹ: Remove the 24V control voltage from the coil terminals. The coil will de-energize, opening the main contacts and disconnecting power from the load.
- Atọka: Some models may include a visual indicator to show the contactor's state (energized/de-energized).
Akiyesi: The contactor is designed for remote control. There is no manual control mechanism on this specific model (as per "Coil without Manual Control").
6. Itọju
The Legrand CX³ Power Contactor 412505 is designed for minimal maintenance. However, periodic checks are recommended to ensure optimal performance and safety.
- Ayewo wiwo: Máa ṣe àyẹ̀wò olùsopọ̀ náà déédéé fún àwọn àmì ìbàjẹ́ ara, ìyípadà àwọ̀ ara, tàbí àwọn ìsopọ̀ tí kò ní ìsopọ̀.
- Titọpinpin: Periodically check that all terminal connections are secure. Loose connections can lead to overheating and failure.
- Ninu: If necessary, gently clean the exterior of the contactor with a dry, lint-free cloth. Do not use solvents or abrasive cleaners. Ensure power is disconnected before cleaning.
- Ayika Ṣiṣẹ: Rii daju pe agbegbe iṣẹ wa laarin iwọn otutu ti a sọ ati awọn sakani ọriniinitutu lati ṣe idiwọ yiya ti tọjọ.
If any issues are observed, disconnect power and consult a qualified electrician.
7. Laasigbotitusita
Before troubleshooting, ensure all power is disconnected. Only qualified personnel should perform troubleshooting and repairs.
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Contactor ko ni agbara nigbati Iṣakoso voltage ti lo. |
|
|
| Contactor energizes but load does not receive power. |
|
|
| Contactor hums loudly or overheats. |
|
|
8. Awọn pato
| Paramita | Iye |
|---|---|
| Nọmba awoṣe | 412505 |
| Brand | Legrand |
| Ipo Isẹ | TAN, PAA |
| Current Rating (I Max) | 25 Amps |
| Awọn ọna Voltage (Akọkọ) | 250 Volts (Bipolar) |
| Awọn ọna Voltage (Coil) | 24 Volts |
| Olubasọrọ Iru | 2 Normally Open (2F) |
| Asopọmọra Iru | Clamp |
| Yipada Iru | Olubasọrọ |
| Ebute Iru | Abẹfẹlẹ |
| Ohun elo Ile | Kunststoff |
| Ohun elo olubasọrọ | Ejò |
| Circuit Iru | 2-ọna |
| Iṣagbesori Iru | DIN Rail Oke |
| Actuator Iru | Plunger |
| Nọmba ti Awọn ipo | 1 |
| Ọna Iṣakoso | Latọna jijin |
| Ilana Asopọmọra | Wi-Fi (Note: Refers to system integration, not inherent Wi-Fi in contactor) |
| Wattage (Ẹrù Tó Pọ̀ Jùlọ) | 600 watt |
| International Idaabobo Rating | IP20 |
| Iwọn Nkan | 0.13 kilo |
9. Atilẹyin ọja ati Support
For warranty information and technical support, please refer to the official Legrand website or contact your local Legrand distributor. Keep your purchase receipt as proof of purchase.