Dataprobe iBoot-G2+ Web Power Switch User Manual

Ọrọ Iṣaaju

The Dataprobe iBoot-G2+ is a web-enabled power switch designed for remote power control and management of connected devices. It features a single NEMA 5-15 circuit outlet, allowing users to remotely reboot, power on, or power off equipment from any location via a web browser or the iBoot Cloud Service. This device is ideal for managing remote servers, network equipment, or any device that benefits from automated power cycling to ensure continuous operation and minimize downtime. The iBoot-G2+ also includes two expansion I/O ports for custom integration with external sensors or alarms, providing enhanced flexibility for various applications.

Eto ati fifi sori

Package Awọn akoonu

• iBoot-G2+ Web Power Switch Unit
• Okun agbara
• àjọlò Cable
• Terminal Blocks for Expansion Ports (2)

Figure 1: iBoot-G2+ unit with standard accessories.

Ti ara Asopọ

1. So agbara: Plug the provided power cord into the A/C Input port on the iBoot-G2+ and then into a standard wall outlet.
2. So Nẹtiwọọki pọ: Connect an Ethernet cable from your network router or switch to the Ethernet port on the iBoot-G2+. Ensure your network has DHCP enabled for automatic IP address assignment.
3. So ẹrọ pọ: Plug the device you wish to control into the A/C Output port of the iBoot-G2+.

Figure 2: Rear and Front View of iBoot-G2+ showing A/C Input, A/C Output, Ethernet, and Expansion Ports.

Nọmba 3: Alaye view of the A/C Output and Expansion I/O Ports (EXP1, EXP2) on the iBoot-G2+.

Iṣeto akọkọ (Web Ọlọpọọmídíà)

Once connected, the iBoot-G2+ will obtain an IP address from your network's DHCP server. You can discover its IP address using the iBoot Discovery Tool (available on the Dataprobe website) or by checking your router's connected devices list.

1. Ṣii a web browser and enter the iBoot-G2+'s IP address in the address bar.
2. Log in using the default credentials (refer to the included quick start guide for default username and password).
3. It is highly recommended to change the default password immediately for security purposes.
4. Configure network settings (e.g., static IP, DNS) if required for your network environment.

Imugboroosi ti mo ti / Eyin Ports

The iBoot-G2+ features two expansion I/O ports (EXP1 and EXP2) for integrating external devices such as sensors or alarms. These ports allow for customized power management solutions based on external triggers. Refer to the advanced user guide on the Dataprobe website for detailed instructions on configuring and utilizing these ports.

Operating the iBoot-G2+

Latọna Power Iṣakoso

The primary function of the iBoot-G2+ is to provide remote control over the power to a connected device. This can be done via the web interface or the iBoot Cloud Service.

• Agbara Tan: Applies power to the connected device.
• Agbara Pa: Removes power from the connected device.
• Power Cycle (Reboot): Briefly removes power and then reapplies it, effectively rebooting the connected device. This is a common operation for unresponsive network equipment.

AutoPing Reboot Feature

The AutoPing feature allows the iBoot-G2+ to automatically monitor the responsiveness of a network device (e.g., a router or server) by continuously sending ping requests to a specified IP address. If the device fails to respond after a configurable number of attempts or duration, the iBoot-G2+ will automatically power cycle the connected equipment.

• Configure target IP addresses for ping monitoring.
• Set the ping interval and the number of failed pings before a power cycle is initiated.
• This feature ensures minimal downtime for critical network components.

iBoot Cloud Service Access

Dataprobe offers a free iBoot Cloud Service that provides secure, centralized power control and monitoring for multiple iBoot devices from anywhere. This service simplifies management, especially for deployments with numerous iBoot units across different locations.

Figure 4: iBoot Cloud Service for centralized management.

• Register your iBoot-G2+ with the iBoot Cloud Service.
• Manage devices, view status, and perform power operations through a single web ni wiwo.

Real-Time titaniji

The iBoot-G2+ can send instant notifications via email or SMS for various events, including power status changes, automatic reboots, or network connectivity issues. This keeps you informed about the status of your connected equipment and the iBoot-G2+ itself.

• Configure alert recipients and notification types in the web ni wiwo.
• Customize which events trigger alerts.

Itoju

The iBoot-G2+ is designed for reliable, low-maintenance operation. Regular maintenance primarily involves ensuring proper ventilation and keeping the unit clean.

• Ninu: Lo aṣọ rírọrùn tí ó gbẹ láti nu ìta ẹ̀rọ náà. Má ṣe lo àwọn ohun ìfọṣọ omi tàbí àwọn ohun èlò ìfọṣọ.
• Afẹfẹ: Ensure the unit is placed in an area with adequate airflow to prevent overheating. Do not block ventilation openings.
• Awọn imudojuiwọn famuwia: Periodically check the Dataprobe webojula fun famuwia awọn imudojuiwọn. Awọn imudojuiwọn famuwia le pese awọn ẹya tuntun, awọn ilọsiwaju iṣẹ, ati awọn imudara aabo. Tẹle awọn ilana ti a pese pẹlu package imudojuiwọn famuwia ni pẹkipẹki.

Laasigbotitusita

Wọpọ Oran ati Solusan

For further assistance, refer to the comprehensive user manual available on the Dataprobe website or contact Dataprobe technical support.

Awọn pato

Alaye atilẹyin ọja

Dataprobe products are manufactured to high quality standards. For detailed warranty information, including terms, conditions, and duration, please refer to the warranty statement provided with your product or visit the official Dataprobe webojula. Jeki ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.

Atilẹyin ati Olubasọrọ

For technical support, product inquiries, or additional documentation, please visit the Dataprobe official webojula tabi kan si wọn onibara iṣẹ Eka.

• Osise Webojula: www.dataprobe.com
• Awọn orisun atilẹyin: Access FAQs, downloads, and detailed user guides.
• Olubasọrọ: Tọkasi awọn website for contact numbers and email addresses for technical support.