BENNING CM 1-2 Digital Current-Clamp Multimeter Afowoyi olumulo

1. Ifihan

This manual provides essential information for the safe and effective operation of the BENNING CM 1-2 Digital Current-Clamp Multimeter. The CM 1-2 is a durable and compact instrument designed for measuring AC currents up to 400 A/AC, as well as AC/DC voltages, resistances, and performing continuity tests. Its digital LC display provides clear readings, and a sliding switch allows for selection of different measurement ranges.

Please read this manual thoroughly before using the device to ensure proper handling and to prevent potential hazards.

2. Alaye Aabo

Always adhere to the following safety precautions to prevent electric shock, injury, or damage to the multimeter or equipment under test.

• Ẹka Iwọn: This device is rated CAT III 600 V. Do not use it for measurements exceeding this category or voltage.
• Ayewo: Kí o tó lo gbogbo ìgbà, ṣe àyẹ̀wò multimeter kí o sì dán àwọn ìtọ́sọ́nà wò fún ìbàjẹ́ èyíkéyìí. Má ṣe lò ó bí ó bá bàjẹ́.
• Lilo daradara: Use the multimeter only for its intended purpose as described in this manual.
• Àwọn àyíká aláàyè: Exercise extreme caution when working with live circuits. Always assume circuits are live until proven otherwise.
• Ohun elo Idaabobo Ti ara ẹni (PPE): Wear appropriate PPE, such as insulated gloves and safety glasses, when performing electrical measurements.
• Rirọpo Batiri: Rọpo awọn batiri ni kiakia nigbati ifihan batiri kekere ba han lati rii daju pe o ka awọn kika deede ati pe o ṣiṣẹ daradara.
• Awọn ipo Ayika: Do not use the multimeter in wet or damp conditions, or in environments with explosive gas or vapor.
• Ṣiṣẹ: Do not attempt to repair or modify the multimeter. Refer all servicing to qualified personnel.

3. Awọn ẹya Ọja

The BENNING CM 1-2 Digital Current-Clamp Multimeter offers the following key features:

• Tiipa aifọwọyi lati tọju igbesi aye batiri.
• Batiri undervoltage display to indicate low battery status.
• Measured value memory (HOLD function) for convenient reading retention.
• Maximum 30 mm jaw opening for clampni ayika conductors.
• Measurement category CAT III 600 V for enhanced safety.
• Measures AC current up to 400 A.
• Awọn iwọn AC/DC voltage.
• Measures resistance.
• Performs continuity tests.

4. Package Awọn akoonu

Daju pe gbogbo awọn nkan wa ati pe ko bajẹ lori ṣiṣi package naa:

• 1 x BENNING CM 1-2 Digital Current-Clamp Multimeter
• 2 x AAA batiri (pẹlu)
• Test leads (integrated or separate, typically included)
• Carrying case (if applicable, not explicitly mentioned but common)
• Ilana Olumulo yii

olusin 4.1: Iwaju view of the BENNING CM 1-2 Digital Current-Clamp Multimeter, highlighting its display, function dial, and clamp ẹrẹkẹ.

5. Eto

5.1 Fifi sori batiri

The BENNING CM 1-2 requires 2 AAA alkaline batteries for operation.

1. Locate the battery compartment cover on the rear of the multimeter.
2. Lo ẹ̀rọ ìdènà (tí ó bá pọndandan) láti ṣí ibi tí batiri wà.
3. Insert the 2 AAA batteries, ensuring correct polarity (+ and -) as indicated inside the compartment.
4. Rọpo ideri iyẹwu batiri ki o ni aabo.

Multimeter ti šetan fun lilo.

6. Awọn ilana Iṣiṣẹ

Familiarize yourself with the function dial and input terminals before proceeding with measurements.

6.1 Titan / Pa a

• To power on, rotate the central sliding switch from "OFF" to the desired measurement function (e.g., A~, V~, V=, Ω))).
• To power off, rotate the sliding switch back to the "OFF" position.
• The device features an automatic shut-off function to conserve battery life if left idle for a period.

6.2 Measuring AC Current (A~)

Lo clamp jaws to measure AC current without breaking the circuit.

1. Rotate the sliding switch to the "A~" position.
2. Ṣii clamp jaws by pressing the lever on the side.
3. Fi adarí kan ṣoṣo ti Circuit naa sinu cl naaamp Ẹsẹ̀. Rí i dájú pé àwọn ẹ̀sẹ̀ náà ti sé pátápátá.
4. Read the AC current value displayed on the LC screen.

Figure 6.1: The BENNING CM 1-2 in use, clamping around a single conductor to measure AC current.

Figure 6.2: The multimeter displaying a current reading of 31.2 A on its digital screen while clamped to a conductor.

6.3 Iwọn AC / DC Voltage (V~ / V=)

Lo awọn itọsọna idanwo fun iwọn diduntage awọn iwọn.

1. Fi okun idanwo dudu sinu ebute titẹ sii "COM".
2. Insert the red test lead into the "V-Ω" input terminal.
3. Rotate the sliding switch to the "V~" for AC voltage tàbí "V=" fún DC voltage.
4. Connect the test leads in parallel across the circuit or component to be measured.
5. Ka voltage value displayed on the LC screen.

6.4 Measuring Resistance (Ω) and Continuity Test ()))

Use the test leads for resistance and continuity measurements.

1. Ensure the circuit or component is de-energized before measuring resistance or continuity.
2. Fi okun idanwo dudu sinu ebute titẹ sii "COM".
3. Insert the red test lead into the "V-Ω" input terminal.
4. Rotate the sliding switch to the "Ω)))" position.
5. For resistance: Connect the test leads across the component. Read the resistance value.
6. For continuity: Connect the test leads across the circuit path. A continuous beep indicates continuity (low resistance).

6.5 Dimu Išė

The HOLD function allows you to freeze the current reading on the display.

• While a measurement is being taken, press the "HOLD" button. The displayed value will be frozen.
• Press the "HOLD" button again to release the reading and return to live measurement.

7. Itọju

7.1 Ninu

Lati nu multimeter, nu ọran naa pẹlu ipolowoamp Aṣọ àti ọṣẹ ìfọṣọ díẹ̀. Má ṣe lo àwọn ohun ìfọṣọ tàbí àwọn ohun èlò ìfọ́. Rí i dájú pé ẹ̀rọ náà ti pa, ó sì ti yọ kúrò nínú àwọn ẹ̀rọ ìṣiṣẹ́ kí o tó sọ ọ́ di mímọ́.

7.2 Batiri Rirọpo

Nigba ti batiri undervoltage indicator appears on the display, replace the batteries immediately to ensure accurate measurements. Refer to Section 5.1 for battery installation instructions. Always use new AAA alkaline batteries.

7.3 Ibi ipamọ

If the multimeter is not to be used for an extended period, remove the batteries to prevent leakage and damage to the device. Store the multimeter in a cool, dry place, away from direct sunlight and extreme temperatures.

8. Laasigbotitusita

Tí ìṣòro náà bá ń bá a lọ lẹ́yìn tí a ti gbìyànjú àwọn ìdáhùn wọ̀nyí, kan si ìrànlọ́wọ́ oníbàárà.

9. Awọn pato

10. Atilẹyin ọja ati Support

For warranty information, please refer to the warranty card included with your product or contact BENNING customer service.

If you encounter any issues or have questions not covered in this manual, please contact BENNING customer support for assistance.

• Olupese: Benning
• Nọmba awoṣe: 044062
• Brand: BENNING
• Webojula: www.benning.de (gẹ́gẹ́ bí a ṣe sọ lórí àpótí ọjà)