Logitech X300 Mobile Wireless Stereo Speaker User Manual

1. Ifihan

This manual provides essential information for the proper setup, operation, and maintenance of your Logitech X300 Mobile Wireless Stereo Speaker. Please read these instructions carefully before using the device.

Figure 1: Logitech X300 Mobile Wireless Stereo Speaker, front angled view.

2. Ohun ti o wa ninu Apoti

Jẹrisi pe gbogbo awọn ohun kan wa ninu package:

• Logitech X300 Mobile Wireless Stereo Speaker
• Okun Ngba agbara USB
• Iwe-ipamọ olumulo (afọwọṣe yii)

3. Eto

3.1 Gbigba agbara si Agbọrọsọ

1. Connect the small end of the USB charging cable to the micro-USB port on the back of the speaker.
2. Connect the large end of the USB charging cable to a USB power adapter (not included) or a powered USB port on a computer.
3. The charging indicator light will illuminate. A full charge typically takes approximately 2-3 hours.
4. The speaker provides up to 5 hours of continuous music playback on a full charge.

3.2 Sisopọ Bluetooth

1. Rii daju pe a ti gba agbara ati agbara si pipa.
2. Tẹ mọlẹ Bọtini agbara (usually located on the side or back) until you hear an audible tone and the Bluetooth indicator light begins to flash rapidly. This indicates the speaker is in pairing mode.
3. On your Bluetooth-enabled device (smartphone, tablet, laptop), navigate to the Bluetooth settings.
4. Select "Logitech X300" from the list of available devices.
5. Once paired, the Bluetooth indicator light on the speaker will glow solid, and you will hear a confirmation tone.
6. Agbọrọsọ naa yoo gbiyanju lati tun so mọ ẹrọ ti a so pọ mọ nikẹhin nigbati o ba tan ina.

olusin 2: Apa view of the speaker with Volume Up, Bluetooth, and Volume Down buttons.

4. Awọn ilana Iṣiṣẹ

4.1 Agbara Tan / Pa

• Lati fi agbara si: Tẹ bọtini naa Bọtini agbara. Ina Atọka yoo tan.
• Lati fi agbara si pipa: Tẹ mọlẹ Bọtini agbara titi ti ina Atọka yoo wa ni pipa.

4.2 Iṣakoso iwọn didun

• To increase volume: Press the Bọ́tìnì Ìwọ̀n Ìwọ̀n (+).
• To decrease volume: Press the Volume Down (-) button.
• You can also control the volume directly from your connected Bluetooth device.

4.3 Ndahun awọn ipe

The Logitech X300 features a built-in microphone for speakerphone functionality.

• When a call comes in, the music will pause.
• Láti dáhùn ìpè kan: Tẹ Bọtini Bluetooth lẹẹkan.
• Lati mu ipe dopin: Tẹ awọn Bọtini Bluetooth lẹẹkan.
• Láti kọ ìpè: Tẹ kí o sì di ìpè náà mú Bọtini Bluetooth fun 2 aaya.

4.4 Ibiti Bluetooth

The speaker maintains a wireless connection up to 30 feet (10 meters) from your Bluetooth-enabled device. Obstacles such as walls or other electronic devices may reduce this range.

Figure 3: Labeled diagram of the Logitech X300 highlighting key features and controls.

5. Itọju

5.1 Ninu

• Mu agbohunsoke nu pẹlu asọ, gbẹ, asọ ti ko ni lint.
• Do not use abrasive cleaners, solvents, or aerosol sprays, as these may damage the finish or internal components.
• Yago fun gbigba ọrinrin sinu eyikeyi awọn ṣiṣi.

5.2 batiri Itọju

• Lati pẹ aye batiri, yago fun gbigba agbara si batiri ni kikun nigbagbogbo.
• If storing the speaker for an extended period, charge it to approximately 50% every few months.
• Do not expose the speaker to extreme temperatures (hot or cold), as this can affect battery performance and lifespan.

6. Laasigbotitusita

6.1 Speaker Does Not Power On

• Ensure the battery is charged. Connect the speaker to a power source using the USB cable and allow it to charge for at least 30 minutes before attempting to power it on again.
• Verify that the power button is being pressed correctly.

6.2 Ko le So pọ nipasẹ Bluetooth

• Ensure the speaker is in pairing mode (Bluetooth indicator light flashing rapidly). If not, power off and then press and hold the Power button until it enters pairing mode.
• Rí i dájú pé Bluetooth ti ṣiṣẹ́ lórí ẹ̀rọ rẹ àti pé ó ṣeé rí.
• Move your device closer to the speaker (within 30 feet/10 meters) and ensure there are no major obstructions.
• Try turning off Bluetooth on your device and then turning it back on.
• If previously paired, try 'forgetting' or 'unpairing' the speaker from your device's Bluetooth settings and then re-pairing.
• Tun bẹrẹ mejeeji agbọrọsọ ati ẹrọ Bluetooth rẹ.

6.3 Ko si Ohun tabi Ko dara Ohun Didara

• Ensure the volume on both the speaker and your connected device is turned up.
• Check that the speaker is properly paired and connected to your device.
• Move your device closer to the speaker to improve signal strength.
• Ensure there are no other devices interfering with the Bluetooth signal.
• Try playing audio from a different application or source on your device.

7. Awọn pato

8. atilẹyin ọja Information

Logitech provides a limited hardware warranty for this product. For detailed warranty terms and conditions, including duration and coverage, please refer to the official Logitech webaaye tabi iwe atilẹyin ọja ti o wa pẹlu rira rẹ.

You can typically find the most current warranty information and registration details on the official Logitech support page.

9. Atilẹyin

Fun iranlọwọ siwaju, atilẹyin imọ-ẹrọ, tabi lati wọle si awọn orisun afikun, jọwọ ṣabẹwo si atilẹyin Logitech osise webojula:

Logitech Atilẹyin Webojula

Here you can find FAQs, driver downloads, and contact information for customer service.