1. Ifihan
The Argox AS8520 is a high-performance cordless imager designed for efficient barcode scanning. It features advanced wireless communication technology, allowing for a data transmission range of up to 100 meters. Equipped with a long-lasting Li-ion battery and an IP42 sealing level, the AS8520 is built for durability and mobility across various environments, including offices, supermarkets, warehouses, and manufacturing facilities.
2. Ọja Ipariview
The AS8520 barcode scanner is designed for comfortable handling and robust performance. Key components include the scanning window, trigger button, and ergonomic grip.
Nọmba 2.1: Apa view of the Argox AS8520 Barcode Scanner, showing the ergonomic handle and trigger button.
Nọmba 2.2: Iwaju view of the Argox AS8520 Barcode Scanner, highlighting the scanning window and product labels.
3. Eto Itọsọna
3.1. Fifi sori batiri ati gbigba agbara
- Ensure the scanner is powered off before installing or removing the battery.
- Locate the battery compartment on the scanner handle.
- Insert the Li-ion battery pack, ensuring correct polarity.
- Pa yara batiri naa ni aabo.
- Connect the scanner to its charging base or power adapter using the provided cable. Allow the battery to fully charge before first use.
3.2. Sísopọ̀ mọ́ Ẹ̀rọ Olùgbàlejò kan
The Argox AS8520 can connect wirelessly to various host devices, including desktops, laptops, and smartphones. Refer to the separate quick start guide for specific pairing instructions for your operating system or device type.
4. Awọn ilana Iṣiṣẹ
4.1. Ṣíṣàyẹ̀wò Àkọ́kọ́
- Ensure the scanner is powered on and successfully paired with your host device.
- Point the scanning window towards the barcode you wish to scan.
- Press and hold the trigger button. A red LED light source (630nm Visible Red LED) will illuminate the barcode.
- Position the scanner at an appropriate distance (the AS8520 offers superior depth of field up to 40 inches on 40-mil codes) until the barcode is successfully read. A successful scan is typically indicated by an audible beep and/or a visual indicator.
- Tu bọtini okunfa naa silẹ.
4.2. To ti ni ilọsiwaju wíwo Awọn ẹya ara ẹrọ
- Rapid Scan Rate: The AS8520 provides a rapid scan rate of 450 scans/sec for efficient data capture.
- Barcode Symbology Support: Supports GS1 Databar (RSS) and CS (Composite Symbology) barcodes.
- Agbara lati ka imọlẹ oorun: Designed to be readable under direct sunlight conditions.
5. Itọju
5.1. Ninu Scanner
- Ensure the scanner is powered off before cleaning.
- Lo asọ rirọ, ti ko ni lint ni sere dampened with water or a mild cleaning solution to wipe the exterior of the scanner.
- For the scanning window, use a lens cleaning cloth to avoid scratches.
- Do not use abrasive cleaners, solvents, or immerse the scanner in liquid. The IP42 sealing level protects against dust and light water splashes, but not full immersion.
5.2. Itọju batiri
- To maximize battery life, avoid fully discharging the Li-ion battery frequently.
- Tọ́jú ẹ̀rọ ìwádìí náà sí ibi tí ó tutù tí ó sì gbẹ nígbà tí a kò bá lò ó fún ìgbà pípẹ́.
- If the battery performance degrades significantly, consider replacing it with an authorized Argox replacement battery.
6. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Scanner ko ni agbara lori. | Battery is discharged or not properly installed. | Gba agbara si batiri. Rii daju pe batiri naa ti joko ni deede ni yara rẹ. |
| Scanner ko ka barcodes. | Barcode is damaged, scanner is too far/close, or incorrect symbology settings. | Ensure the barcode is clear. Adjust scanning distance. Check scanner programming for supported barcode types. |
| No data transmitted to host device. | Scanner not paired or out of range. | Re-pair the scanner with the host device. Ensure the scanner is within the 100-meter transmission range. |
| Scanner is unresponsive. | Ibùgbé software glitch. | Perform a soft reset by powering off and then on the scanner. If issues persist, consult the manufacturer's support. |
7. Imọ ni pato
| Ẹya ara ẹrọ | Sipesifikesonu |
|---|---|
| Awoṣe | AS8520 |
| Oṣuwọn ọlọjẹ | 450 scans / iṣẹju-aaya |
| Orisun Imọlẹ | 630nm Visible Red LED |
| Ṣiṣe ayẹwo | Starting at 0.1mm (4 mil) |
| Ijinle ti Field | Up to 40 inches on 40-mil codes |
| Data Gbigbe Ibiti | 100 meters (wireless) |
| Awọn ẹrọ ibaramu | Desktop, Laptop, Smartphone |
| Orisun agbara | Battery Powered (Li-ion battery pack) |
| Awọn iwọn otutu ti nṣiṣẹ | 0°C si 50°C (32°F si 122°F) |
| Ibi ipamọ otutu | -20°C si 70°C (-4°F si 158°F) |
| Ọriniinitutu | 10% si 90% ọriniinitutu ojulumo, ti kii-condensing |
| Ipele Imọlẹ | Titi di 70,000 lux |
| Current - Operating | 225 MA @ 4.2 VDC |
| Current - Standby | 32 MA @ 4.2 VDC |
| Power - Operating | 900mW |
| Power - Standby | 150mW |
| Reliability (Trigger) | 1,000,000 igba |
| Reliability (Cable) | 320,000 times (90° bend) |
| Ju Specification | 1.5 mita |
| Lilẹ Ipele | IP42 |
| Iwọn Nkan | 1.3 kg |
| GTIN/UPC | 702563636336 |
8. Atilẹyin ọja ati Support
For detailed warranty information, please refer to the warranty card included with your product or visit the official Argox website. For technical support, service, or replacement parts, please contact your authorized Argox reseller or Argox customer service directly.