Ferm MSM1037 Mitre Saw - 1300W/210mm Instruction Manual

1. Awọn Ilana Aabo pataki

Nigbagbogbo ka ati loye gbogbo awọn ikilọ aabo, awọn itọnisọna, awọn apejuwe, ati awọn pato ti a pese pẹlu ohun elo agbara yii. Ikuna lati tẹle gbogbo awọn ilana ti a ṣe akojọ rẹ si isalẹ le ja si mọnamọna, ina, ati/tabi ipalara nla. Fi gbogbo awọn ikilo ati awọn ilana fun itọkasi ojo iwaju.

• Wọ aabo oju ati aabo gbigbọ.
• Pa ọwọ kuro ni agbegbe gige.
• Rii daju pe workpiece wa ni aabo clamped.
• Disconnect power before changing blades or performing maintenance.
• Use only blades specified for this tool and material.
• Jẹ ki agbegbe iṣẹ jẹ mimọ ati itanna daradara.
• Ma ṣe ṣiṣẹ awọn irinṣẹ agbara ni awọn bugbamu bugbamu.
• Avoid accidental starting. Ensure the switch is in the off-position before connecting to power.

2. Ọja Ipariview

The Ferm MSM1037 Mitre Saw is a powerful 1300W tool designed for precise cutting of various materials including metal, nylon, plastic, stainless steel, and wood. It features a 210mm saw blade and operates at 4500 RPM.

olusin 1: Iwaju view of the Ferm MSM1037 Mitre Saw, showing the blade, base, and handle assembly.

3. Eto ati Apejọ

3.1 Ṣiṣii silẹ

Carefully remove all components from the packaging. Inspect for any damage that may have occurred during transit. Retain packaging for future storage or transport.

3.2 Securing the Saw

Mount the mitre saw securely to a stable workbench using appropriate bolts and washers. Ensure the saw is level and does not wobble during operation.

3.3 Blade fifi sori

1. Ge asopọ ri lati ipese agbara.
2. Tẹ bọtini titiipa spindle.
3. Use the provided wrench to loosen the blade retaining bolt.
4. Remove the outer flange and old blade.
5. Install the new 210mm blade, ensuring the rotation direction matches the arrow on the guard.
6. Replace the outer flange and tighten the retaining bolt securely.
7. Tu titiipa spindle silẹ.

4. Awọn ilana Iṣiṣẹ

4.1 Adjusting Mitre Angle

To adjust the mitre angle, loosen the mitre lock knob. Rotate the turntable to the desired angle, indicated on the scale. Tighten the mitre lock knob firmly to secure the position.

olusin 2: Isunmọ view of the mitre angle scale on the saw base, showing markings from 0 to 45 degrees left and right.

4.2 Siṣàtúnṣe Bevel Angle

For bevel cuts, loosen the bevel lock lever located at the rear of the saw. Tilt the saw head to the desired angle (up to 45 degrees). Securely tighten the bevel lock lever.

Figure 3: Detail of the bevel angle adjustment mechanism, showing the scale and locking lever for tilting the saw head.

4.3 Ṣiṣe Ge

1. Place the workpiece firmly against the fence and clamp o ni aabo.
2. Rii daju pe abẹfẹlẹ ko kuro ninu iṣẹ-ṣiṣe ṣaaju ki o to bẹrẹ ọkọ ayọkẹlẹ naa.
3. Press the trigger switch to start the motor and allow the blade to reach full speed.
4. Slowly lower the saw blade through the workpiece.
5. Ni kete ti gige ba ti pari, tu iyipada ti o nfa silẹ ki o jẹ ki abẹfẹlẹ naa duro patapata ṣaaju igbega ori ri.

5. Itọju

5.1 Ninu

Regularly clean the saw to remove sawdust and debris. Use a brush or vacuum cleaner. Do not use solvents that may damage plastic parts.

5.2 abẹfẹlẹ ayewo

Inspect the saw blade before each use for sharpness, cracks, or missing teeth. Replace damaged or dull blades immediately.

5.3 Erogba gbọnnu

The carbon brushes may need periodic replacement. Consult a qualified service technician for this procedure.

6. Laasigbotitusita

7. Awọn pato

• Nọmba awoṣe: MSM1037
• Agbara: 1300W
• Voltage: 240 Volts
• Opin Abẹfẹ: 210mm
• Iyara: 4500 RPM
• Igun Ige: 45 Degrees (Mitre and Bevel)
• Number of Teeth (Blade): 80
• Ìwọ̀n Nkan: 6 kilo
• Awọn iwọn ọja: 42 x 40 x 30 cm
• Iṣeduro Ilẹ: Metal, Nylon, Plastic, Stainless Steel, Wood
• Orisun Agbara: Okun Itanna

8. Atilẹyin ọja ati Support

For warranty information and technical support, please refer to the documentation provided with your purchase or contact Ferm customer service. Keep your purchase receipt as proof of purchase.

Olupese: Bosch (as per product data)

Ọjọ Akọkọ Wa: Oṣu Kẹjọ Ọjọ 15, Ọdun 2015