Ọrọ Iṣaaju
The EVGA SuperNOVA 850 P2 is an 80 PLUS Platinum certified power supply designed to deliver stable and efficient power to your computer system. This fully modular unit incorporates high-quality components, including 100% Japanese capacitors, to ensure long-term reliability and performance. The EVGA ECO Mode allows for silent operation during low to medium loads by stopping the fan. This manual provides essential information for the safe and correct installation, operation, and maintenance of your power supply.
Image: The EVGA SuperNOVA 850 P2 Platinum Power Supply, showcasing its sleek black design and fan grille.
Awọn ẹya ara ẹrọ
- 80 PLUS Platinum Ti gba ifọwọsi: Achieves 92% (115VAC) / 94% (220VAC~240VAC) efficiency or higher under typical loads, reducing heat and operating costs.
- Apẹrẹ Modulu ni kikun: Allows for detachable cables, reducing clutter and improving airflow within the PC case.
- EVGA ECO Mode: Enables the power supply fan to turn off during low to medium loads for completely silent operation.
- Àwọn Capacitors ti Japan 100%: Ensures long-term reliability and stable power delivery.
- 140mm Double Ball Bearing Fan: Provides excellent cooling performance and durability.
- Awọn aabo to peye: Includes OVP (Over Voltage Idaabobo), UVP (Labẹ Voltage Protection), OCP (Over Current Protection), OPP (Over Power Protection), SCP (Short Circuit Protection), and OTP (Over Temperature Protection).
Ohun ti o wa ninu Apoti
Nígbà tí o bá ṣí àpótí náà, rí i dájú pé gbogbo àwọn nǹkan wọ̀nyí wà níbẹ̀:
- EVGA SuperNOVA 850 P2 Power Supply Unit
- Modular Cable Set (including ATX, EPS, PCIe, SATA, Peripheral cables)
- AC Agbara okun
- Iṣagbesori skru
- Power On Self Tester (POST)
- Afowoyi Olumulo (iwe-ipamọ yii)
Image: A complete set of modular cables for the EVGA SuperNOVA P2 power supply, including main ATX, CPU, PCIe, SATA, and peripheral connectors.
Eto ati fifi sori
Follow these steps to properly install your EVGA SuperNOVA 850 P2 power supply into your computer system.
- Aabo Lakọkọ: Rí i dájú pé kọ̀ǹpútà rẹ ti pa pátápátá àti pé ó ti yọ ìsopọ̀ mọ́ ibi tí ó wà ní ògiri.
- Yọ PSU Atijọ kuro (ti o ba wulo): Disconnect all cables from your old power supply and remove it from the PC case.
- Gbe PSU Tuntun naa: Carefully place the EVGA SuperNOVA 850 P2 into the power supply bay of your PC case. Secure it with the provided mounting screws. Ensure the fan is facing the correct direction for optimal airflow (typically facing down if your case has a bottom vent, or up if it's a top-mounted PSU).
- So awọn okun pataki pọ:
- So okùn ATX 24-pin pọ mọ modaboudu rẹ.
- Connect the 8-pin (4+4) EPS/CPU cable(s) to your motherboard.
- Connect the appropriate PCIe (6+2 pin) cables to your graphics card(s).
- So awọn okun agbara SATA pọ mọ awọn awakọ ibi ipamọ rẹ (HDDs, SSDs) ati awọn awakọ opitika.
- Connect peripheral (Molex) cables to any other components requiring them (e.g., case fans, fan controllers).
- Iṣakoso USB: Utilize the fully modular design to connect only the necessary cables. Route cables neatly behind the motherboard tray or in designated channels to improve airflow and aesthetics.
- Sopọ agbara AC: Plug the AC power cord into the power supply and then into a wall outlet or surge protector.
- Agbara Tan: Flip the power switch on the back of the PSU to the 'ON' position. Power on your computer.
Image: The modular cable connection panel of the EVGA SuperNOVA 850 P2, showing clearly labeled ports for motherboard (MB), CPU, VGA, SATA, and Peripheral connections.
Image: The rear panel of the EVGA SuperNOVA 850 P2, featuring the AC power inlet and the main power switch.
Awọn ilana Iṣiṣẹ
The EVGA SuperNOVA 850 P2 is designed for straightforward operation. Key features include:
- Agbara Yi pada: Located on the rear of the unit, this switch controls the main power to the PSU. Ensure it is in the 'ON' position for the system to receive power.
- EVGA ECO Mode: This feature is controlled by a switch on the modular cable panel. When ECO Mode is 'ON', the power supply fan will remain off during low to medium system loads, providing silent operation. The fan will automatically activate when the load increases to maintain optimal temperatures. When ECO Mode is 'OFF', the fan will operate continuously.
Fidio: Oṣiṣẹ kan ti pariview of the EVGA SuperNOVA P2 Power Supply series, highlighting its 80 PLUS Platinum certification and key features.
Itoju
Itọju to dara ṣe idaniloju gigun ati iṣẹ ti o dara julọ ti ipese agbara rẹ.
- Yiyọ eruku kuro: Lorekore nu eruku lati grille afẹfẹ ipese agbara ati awọn atẹgun nipa lilo afẹfẹ fisinuirindigbindigbin. Rii daju pe eto naa ti wa ni pipa ati yọọ kuro ṣaaju ṣiṣe mimọ.
- Ayẹwo USB: Regularly check all modular cables for secure connections and any signs of wear or damage. Replace any damaged cables immediately.
- Ayika: Operate the power supply in a well-ventilated area, free from excessive heat, humidity, and dust.
Aworan: Oke-isalẹ view of the EVGA SuperNOVA 850 P2, highlighting the fan grille which should be kept clear of dust for efficient cooling.
Laasigbotitusita
Ti o ba pade awọn ọran pẹlu ipese agbara rẹ, tọka si awọn igbesẹ laasigbotitusita ti o wọpọ wọnyi:
- Ko si Agbara:
- Rí i dájú pé okùn agbára AC ti so mọ́ PSU àti ihò ìtajà ògiri dáadáa.
- Rí i dájú pé ẹ̀rọ ìyípadà agbára tó wà lẹ́yìn PSU wà ní ipò 'ON'.
- Check all modular cable connections to the motherboard and components.
- Test the power supply using the included Power On Self Tester (POST) to confirm basic functionality.
- Àìdúróṣinṣin sí ètò/Ìpadé àìròtẹ́lẹ̀:
- Ensure the power supply is adequately rated for your system's components.
- Check for overheating. Ensure proper case airflow and that the PSU fan is operating (if ECO mode is off or under load).
- Rii daju pe gbogbo awọn asopọ agbara wa ni aabo.
- Ariwo Fan
- If ECO Mode is 'ON', the fan will be off during low loads. This is normal.
- If the fan is excessively loud when ECO Mode is 'OFF' or under load, ensure there are no obstructions to the fan blades and that the PSU is clean of dust.
If issues persist after following these steps, please contact EVGA customer support.
Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Nọmba awoṣe | 220-P2-0850-X1 |
| Wattage | 850W |
| 80 PLUS Ijẹrisi | Platinum |
| Fọọmù ifosiwewe | ATX |
| Modularity | Module ni kikun |
| Fan Size / Bearing | 140mm Double Ball Bearing |
| Awọn agbara agbara | 100% èdè Japan |
| Iṣagbewọle Voltage | 100-240 VAC |
| Igbohunsafẹfẹ Input | 50/60 Hz |
| Awọn iwọn (LxWxH) | 6.5 x 5.91 x 3.3 inches (165 x 150 x 85 mm) |
| Iwọn | 7.95 poun (3.6 kg) |
Image: The specification label on the EVGA SuperNOVA 850 P2, detailing electrical ratings and certifications.
Atilẹyin ọja ati Support
The EVGA SuperNOVA 850 P2 power supply is backed by an industry-leading 10-odun atilẹyin ọja, ensuring peace of mind and long-term reliability.
For technical support, warranty claims, or additional information, please visit the official EVGA webojula tabi kan si wọn onibara iṣẹ Eka. Jeki ẹri rira rẹ fun ijẹrisi atilẹyin ọja.
Òṣìṣẹ́ EVGA Webojula: www.evga.com
