Johnson Controls M9104-AGA-2S Electric Non-Spring-Return Actuator User Manual

Ọja Pariview

The Johnson Controls M9104-AGA-2S Series Electric Non-Spring-Return Actuator is designed for precise control in various HVAC applications. This direct-mount actuator operates on AC 24 V power and provides floating control. It is suitable for installation on VAV boxes, Variable Volume and Temperature (VVT) two-position zone applications, or small- to medium-sized dampbẹẹni.

Awọn ẹya pataki pẹlu:

• Direct Shaft Mounting with Single-Screw Coupler: Simplifies installation and ensures secure gripping.
• 100,000 Cycle Rating: Ensures long-term reliability and service life.
• Synchronous Drive: Provides consistent rotation time regardless of load.
• 35 dB Nominal Audible Noise Rating: Suitable for environments requiring low noise levels.
• Short Travel Time: Offers quick response for two-position zone applications.

Ọja Visuals

olusin 1: Iwaju view of a Johnson Controls Electric Non-Spring-Return Actuator. The image displays the blue casing, model number M9102-AGA-2S (representative of the series), torque rating (2Nm), IP42 rating, CE mark, ULus listing, and the wiring diagram for AC 24V power with Black, Red, and Orange terminals.

Eto ati fifi sori

The M9104-AGA-2S actuator is designed for direct mounting. Ensure the power supply is disconnected before beginning installation.

1. Shaft Preparation: The actuator can be mounted on a round shaft up to 1/2 inch (13 mm) in diameter or a 3/8 inch (10 mm) square shaft. Ensure the shaft is clean and free of burrs.
2. Iṣagbesori: Position the actuator on the damper or VAV box shaft. Utilize the single-screw coupler for secure attachment, ensuring three-point shaft gripping.
3. Asopọmọra: Connect the actuator to an AC 24 V power source. Refer to the wiring diagram on the actuator label for correct terminal connections (Black, Red, Orange). The -2S models are equipped with plenum cables.
4. Ṣayẹwo iṣẹ ṣiṣe: After installation and wiring, apply power and verify proper operation, ensuring the actuator moves freely through its full range of motion.

Awọn ilana Iṣiṣẹ

The M9104 Series Actuator provides floating control. It operates by receiving control signals to drive the damper or valve to the desired position.

• Ibi ti ina elekitiriki ti nwa: The actuator requires an AC 24 V power supply at 50/60 Hz.
• Iru Iṣakoso: This model supports floating control (AGA).
• Torque nṣiṣẹ: The M9104 Series provides a running torque of 35 lb·in (4 N·m).
• Nominal Travel Time (90°): 60 seconds at 60 Hz (72 seconds at 50 Hz).
• Yiyọ afọwọṣe: If equipped, refer to the specific product markings for any manual override procedures.

Itoju

The Johnson Controls M9104-AGA-2S actuator is designed for long-term, maintenance-free operation. However, periodic inspection is recommended to ensure optimal performance.

• Ayewo wiwo: Annually inspect the actuator for any signs of physical damage, loose connections, or excessive dust accumulation.
• Aabo iṣagbesori: Verify that the actuator remains securely mounted to the shaft and that all fasteners are tight.
• Iduroṣinṣin onirin: Check wiring for fraying, corrosion, or loose terminals.
• Ninu: If necessary, gently clean the exterior of the actuator with a dry, soft cloth. Do not use abrasive cleaners or solvents.

Laasigbotitusita

Apá yìí fúnni ní ìtọ́sọ́nà gbogbogbò fún àwọn ọ̀ràn tó wọ́pọ̀. Fún àwọn ìṣòro tó díjú, kan sí ìrànlọ́wọ́ ìmọ̀-ẹ̀rọ.

Awọn pato

• Nọmba awoṣe: M9104-AGA-2S
• Iru Iṣakoso: Floating (AGA)
• Ibi ti ina elekitiriki ti nwa: AC 24 V, 50/60 Hz
• Torque nṣiṣẹ: 35 lb·in (4 N·m)
• Nominal Travel Time (90°): 60 seconds (60 Hz), 72 seconds (50 Hz)
• Audible Noise Rating: 35 dB Orukọ
• Cycle Rating: 100,000 iyipo
• Ibamu Ọpá: Round up to 1/2 in. (13 mm) diameter, or 3/8 in. (10 mm) square shaft
• Awọn iwọn ọja: 8.2 x 4.8 x 4.5 inches
• Ìwúwo: 3 iwon
• Olupese: Johnson Controls Inc
• Akọkọ Wa: Oṣu Kẹsan Ọjọ 5, Ọdun 2013

Alaye atilẹyin ọja

Johnson Controls products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the official warranty statement provided with your product or visit the Johnson Controls official website. Typically, products are covered against defects in materials and workmanship for a specified period from the date of purchase.

Onibara Support

For technical assistance, troubleshooting beyond this manual, or spare parts inquiries, please contact Johnson Controls customer support.

• Webojula: www.johnsoncontrols.com
• Ibi iwifunni: Tọkasi apakan "Kan si Wa" lori osise naa webAaye fun awọn nọmba foonu agbegbe ati atilẹyin imeeli.