Amazon Basics Steel Security Safe and Lock Box (Model 18EI-43) Instruction Manual

Ọrọ Iṣaaju

This manual provides instructions for the setup, operation, and maintenance of your Amazon Basics Steel Security Safe and Lock Box, Model 18EI-43. Please read these instructions carefully before use and retain for future reference. This safe is designed to secure valuables such as cash, jewelry, and documents using a digital keypad or emergency override keys.

Alaye Aabo

• Do not store emergency keys inside the safe. Keep them in a secure, separate location away from the safe.
• Ensure the safe is mounted securely to a wall, floor, or shelf to prevent unauthorized removal.
• Keep the safe away from extreme temperatures and moisture.
• Rọpo awọn batiri ni kiakia nigbati itọka batiri kekere ba han lati yago fun titiipa.

Kini To wa

Package naa pẹlu awọn paati wọnyi:

• Amazon Basics Steel Security Safe
• 2 Awọn bọtini Pajawiri Pajawiri
• 4 Expansion Bolts for mounting

This image displays the safe along with its included accessories: two emergency keys and four expansion bolts for secure installation.

Ṣeto

Ibẹrẹ ibẹrẹ

Your safe is shipped in a locked state. To open it for the first time:

1. Locate the keyhole cover on the electronic keypad panel.
2. Remove the keyhole cover.
3. Fi ọ̀kan lára ​​àwọn kọ́kọ́rọ́ ìyípadà pajawiri sínú ihò kọ́kọ́rọ́ náà.
4. Turn the key counter-clockwise and simultaneously turn the knob clockwise to open the safe door.

This diagram illustrates the two methods for opening the safe: using the emergency key or entering a passcode.

Fifi sori batiri

The safe requires four AA batteries (not included) for the electronic keypad to function.

1. With the safe door open, locate the battery compartment on the inside of the door.
2. Ṣii ideri iyẹwu batiri naa.
3. Fi awọn batiri AA tuntun mẹrin sii, ki o rii daju pe polarity ti o tọ (+/-).
4. Pa ideri iyẹwu batiri naa.

Fifi sori ẹrọ ti ailewu

For enhanced security, the safe can be mounted to a wall, floor, or shelf using the provided expansion bolts.

1. Choose a suitable, discreet location for mounting.
2. Mark the drilling points through the pre-drilled holes located inside the safe.
3. Lilu awọn ihò awaoko ni awọn ipo ti o samisi.
4. Align the safe with the drilled holes and secure it using the expansion bolts.

The safe can be discreetly placed and mounted within a closet or on a shelf for secure storage.

Awọn ilana Iṣiṣẹ

Setting Your User Code

The user code can be 3 to 8 digits long.

1. With the safe door open, press the red reset button located on the inside of the door, near the battery compartment. The yellow light on the keypad will illuminate.
2. Enter your desired 3 to 8 digit code.
3. Press the "#" button to confirm. The yellow light will turn off, indicating the code is set.
4. Ṣe idanwo koodu tuntun pẹlu ṣiṣi ilẹkun ṣaaju pipade rẹ.

Opening the Safe with the Digital Keypad

1. Enter your 3 to 8 digit user code.
2. Press the "#" button.
3. Laarin iṣẹju-aaya 5, tan koko naa si ọna aago lati ṣii ilẹkun ailewu.

This diagram illustrates the two methods for opening the safe: using the emergency key or entering a passcode.

Opening the Safe with Emergency Keys

In case of a forgotten code or depleted batteries, the emergency keys provide access.

1. Remove the keyhole cover on the electronic keypad panel.
2. Insert an emergency override key into the keyhole.
3. Turn the key counter-clockwise and simultaneously turn the knob clockwise to open the safe door.

Itoju

Batiri Rirọpo

When the low battery indicator (usually a red light or specific display icon) appears, replace all four AA batteries promptly to ensure continued operation. Always use new, high-quality batteries.

Ninu

Wipe the safe exterior with a soft, damp asọ. Yago fun abrasive ose tabi olomi ti o le ba awọn ipari.

Ibi ipamọ bọtini

Always store the emergency override keys in a secure location away from the safe. Do not store them inside the safe.

Laasigbotitusita

• Bọtini foonu Ko Dahun: Ensure batteries are correctly installed and not depleted. If the issue persists, check for any loose internal connections, such as a ribbon cable, by carefully inspecting the inside of the door (refer to the "Battery Installation" section for access).
• Safe Will Not Open with Code: Verify that the correct code is being entered. Ensure the "#" button is pressed after the code, and the knob is turned within 5 seconds. If batteries are low, use the emergency key.
• Kọ́kọ́rọ́ Pajawiri Kò Ṣiṣẹ́: Ensure the key is fully inserted and turned counter-clockwise while simultaneously turning the knob clockwise.
• Annoying Beeper Sound: The safe's electronic keypad emits beeps. There is no user-adjustable volume control. Please note that unauthorized modifications to the internal speaker are not officially supported and may void the product warranty.

Awọn pato

This image provides a visual representation of the safe's external dimensions.

Atilẹyin ọja ati Support

For warranty information or technical support regarding your Amazon Basics Steel Security Safe, please refer to the documentation included with your purchase. You may also visit the official Amazon Basics support webaaye fun iranlọwọ siwaju sii.