Universal Office Chair Assembly Manual

1. Alaye Aabo pataki

Jọwọ ka gbogbo awọn ilana ni pẹkipẹki ṣaaju apejọ ati lo. Jeki iwe afọwọkọ yii fun itọkasi ọjọ iwaju.

• Ensure all parts are present and undamaged before beginning assembly. Do not use if any parts are missing or damaged.
• Assemble the chair on a soft, clean surface to prevent scratching.
• Má ṣe fi àwọn skru le ju bó ṣe yẹ lọ nígbà tí a bá ń kó wọn jọ, nítorí pé èyí lè ba àwọn èròjà náà jẹ́.
• Pa awọn ọmọde ati awọn ohun ọsin kuro ni agbegbe apejọ. Awọn ẹya kekere le jẹ eewu gbigbọn.
• Only use the chair for its intended purpose.
• Maṣe duro lori alaga.

2. Package Awọn akoonu

Verify that all components listed below are included in your package.

3. Apejọ Awọn ilana

Follow these steps carefully to assemble your office chair.

1. So Casters si Ipilẹ Irawọ: Insert each caster (F) into the holes at the end of each leg of the star base (E). Push firmly until they click into place.
2. Fi Gas Gbe soke: Place the gas lift cylinder (D) into the center hole of the assembled star base (E). Ensure it sits securely.
3. So Awo Mechanism mọ Ijoko: Align the mechanism plate (G) with the pre-drilled holes on the underside of the seat cushion (B). Ensure the front of the mechanism plate faces the front of the seat. Secure with four M8x25mm screws (I) using the Allen wrench (J).
4. So Armrests to Ijoko: Attach the armrests (C) to the underside of the seat cushion (B) using four M6x20mm screws (H), two per armrest. Do not fully tighten yet.
5. Attach Chair Back to Armrests: Align the chair back (A) with the remaining holes on the armrests (C). Secure with the remaining four M6x20mm screws (H), two per armrest. Now, fully tighten all armrest screws.
6. So Apejọ Ijoko pọ si Igbesoke Gaasi: Carefully place the assembled seat and back onto the gas lift cylinder (D) protruding from the star base. Press down firmly to secure.

Your office chair is now assembled.

4. Awọn ilana Iṣiṣẹ

Familiarize yourself with the chair's adjustment features for optimal comfort.

• Atunse Giga: Lati gbe ijoko, gbe lefa ti o wa labẹ apa ọtun ti ijoko nigba ti o mu iwuwo rẹ kuro ni alaga. Lati sokale ijoko, gbe lefa nigba ti o joko. Tu lefa silẹ ni giga ti o fẹ.
• Títì Títì/Ṣí sílẹ̀: Pull the same lever outwards to unlock the tilt function, allowing the chair back to recline. Push the lever inwards to lock the chair back in an upright position.
• Ẹdọ̀bá tẹ̀: Rotate the round knob located under the front-center of the seat to adjust the tension of the tilt mechanism. Turn clockwise to increase tension (making it harder to recline) and counter-clockwise to decrease tension (making it easier to recline).
• Armrest Adjustment (if applicable): Some models feature adjustable armrests. Look for buttons or levers on the armrests to adjust their height or pivot.

5. Itọju

Regular maintenance will prolong the life of your office chair.

• Ninu: Mu awọn oju ilẹ pẹlu asọ, damp cloth. For fabric upholstery, use a mild fabric cleaner. Avoid harsh chemicals or abrasive cleaners.
• Ṣayẹwo Fastener: Lorekore ṣayẹwo gbogbo awọn skru ati awọn boluti lati rii daju pe wọn ṣinṣin. Retighten ti o ba wulo.
• Caster Cleaning: Remove any hair or debris that may accumulate around the casters to ensure smooth movement.
• Lubrication: The gas lift cylinder is maintenance-free. Do not attempt to lubricate it.

6. Laasigbotitusita

Tọkasi apakan yii fun awọn ojutu si awọn ọran ti o wọpọ.

7. Awọn pato

Key technical details of your office chair.