Ọrọ Iṣaaju
This instruction manual provides comprehensive guidance for the installation, operation, and maintenance of your AIBOO Dimmable LED Under Cabinet Puck Lights. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Package Awọn akoonu
Daju pe gbogbo awọn paati ti a ṣe akojọ rẹ si isalẹ wa ninu package rẹ:
- 3 x Awọn imọlẹ Puck LED
- Pípín Ọ̀nà Mẹ́jọ 1 x
- 1 x RF Isakoṣo latọna jijin
- 1 x LED Adarí
- 1 x 12V 0.5A Power Adapter
- 1 x On/Off Switch Cable
- 6 x Awọn ohun ilẹmọ alemora
- 6 x Iṣagbesori skru
Nọmba 1: All components included in the package. This image displays the puck lights, splitter, remote, controller, adapter, on/off switch, stickers, and screws.
Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Nọmba awoṣe | YK-300000197 |
| Brand | AIBOO |
| Puck Light Dimensions (L x W x H) | 6 x 6 x 0.8 cm (2.3 x 2.3 x 0.3 inches) |
| Iwọn | 204 giramu (apapọ package) |
| Number of Puck Lights | 3 |
| Iṣagbewọle Voltage | 110 Volts |
| Wattage (per light) | 2 Wattis |
| Latọna Iṣakoso Batiri | 1 x CR2 (pẹlu) |
| UPC / GTIN | 712411876784 |
Nọmba 2: Product dimensions and cable lengths. This image provides measurements for the puck lights and connecting cables.
Eto ati fifi sori
Follow these steps to properly install your LED puck lights:
- Gbero Eto: Determine the desired locations for your three puck lights under your cabinet or shelf. Ensure the cables can reach the central splitter and power source.
- Awọn imọlẹ Oke Puck:
- Lilo Awọn ohun ilẹmọ Adhesive: Peel the backing from the adhesive stickers and firmly press them onto the back of each puck light. Then, press the lights onto the desired clean, dry surface.
- Lilo awọn skru: For a more permanent installation, use the provided screws to mount the puck lights. Mark the screw holes, pre-drill if necessary, and secure the lights.
- So awọn ina Puck pọ mọ Splitter: Connect the cable from each puck light to one of the three ports on the 3-way splitter.
- So Splitter pọ mọ Oluṣakoso: Connect the main cable from the 3-way splitter to the input port of the LED controller.
- Connect On/Off Switch (Optional): If you wish to use the inline on/off switch, connect the LED controller to the switch cable. If not, proceed to the next step.
- Connect On/Off Switch (or Controller) to Power Adapter: Connect the output of the on/off switch cable (or directly from the LED controller if not using the switch) to the 12V 0.5A power adapter.
- So sinu Agbara: So ohun ti nmu badọgba agbara pọ mọ inu ibudo itanna 110V boṣewa kan.
- Iṣakoso USB: Secure any excess cabling using cable clips or ties (not included) for a neat and safe installation.
Awọn ilana Iṣiṣẹ
Your AIBOO LED puck lights are controlled by the included RF remote. Ensure the remote has a working CR2 battery installed.
Nọmba 3: RF Remote Control Functions (New Version). This image details the buttons and their corresponding actions for controlling the lights.
- Titan/Apapa: Tẹ awọn ON button to turn the lights on. Press the PAA bọtini lati pa wọn.
- Ṣatunṣe Imọlẹ:
- Lo awọn Imọlẹ + ati Imọlẹ- buttons to gradually increase or decrease the light intensity.
- Lo awọn 100%, 50%, ati 25% awọn bọtini fun awọn tito imọlẹ iyara.
- Pairing/Decoding Remote: If the remote does not control the lights, or if you are pairing a new remote, press the Tọkọtaya or Yiyipada button. The lights will flicker to indicate successful pairing.
- Iṣẹ Aago: Set an automatic shut-off timer by pressing the 1H, 2H, 4H, tabi 8H buttons. The lights will turn off after the selected duration.
Nọmba 4: Adjustable Brightness Levels. This image illustrates the range of brightness settings available via the remote control.
Itoju
- Ninu: Disconnect power before cleaning. Use a soft, dry cloth to wipe the puck lights and remote control. Do not use abrasive cleaners or solvents.
- Rirọpo Batiri latọna jijin: If the remote control's range decreases or it stops responding, replace the CR2 battery. Refer to the remote's battery compartment for instructions on how to open and replace the battery.
- Gbogbogbo Itọju: Avoid exposing the lights or controller to excessive moisture or extreme temperatures.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Awọn imọlẹ ko tan. |
|
|
| Isakoṣo latọna jijin ko dahun. |
|
|
| Àwọn ìmọ́lẹ̀ máa ń tàn tàbí kí wọ́n máa tàn láìròtẹ́lẹ̀. |
|
|
Atilẹyin ọja ati Support
AIBOO products are designed for reliability and performance. For specific warranty information or technical support, please refer to the product packaging or contact AIBOO customer service directly through their official website or the retailer where the product was purchased. Please have your model number (YK-300000197) and purchase date available when contacting support.