THOMSON CR50 Radio Alarm Clock

Ọja Pariview

The THOMSON CR50 Radio Alarm Clock is designed for reliable timekeeping and pleasant wake-up experiences. This compact device features a clear digital display, FM radio functionality, and dual alarm settings. Its ergonomic design ensures ease of use for daily operation.

olusin 1: Iwaju view of the THOMSON CR50 Radio Alarm Clock.

• Alarm repetition (Snooze function)
• 230V AC power adapter for main operation
• Ipari dudu didan
• Awọn eto itaniji meji
• FM radio with station presets

Eto Itọsọna

1. Asopọ agbara

Connect the provided 230V AC power adapter to the DC input port on the back of the alarm clock. Plug the adapter into a standard wall outlet. The display will illuminate, and the clock will be ready for initial setup.

2. Batiri Afẹyinti fifi sori

For time and setting retention during power outages, install 2 AAA batteries (not included) into the battery compartment located on the bottom of the unit. Ensure correct polarity (+/-) as indicated inside the compartment.

3. Eto Aago Ibẹrẹ

Lẹ́yìn tí a bá kọ́kọ́ gba agbára tàbí lẹ́yìn tí a bá ti gba agbáratage without battery backup, the time display may flash. To set the time:

1. Tẹ mọlẹ Akoko SET button (often labeled with a clock icon) until the hour digits flash.
2. Lo awọn HR (Hour) and MIN (Minute) buttons to adjust the time.
3. Tẹ Akoko SET lẹẹkansi lati jẹrisi ati ipo eto akoko jade.

4. Antenna Oṣo

For optimal FM radio reception, fully extend the wire antenna located at the back of the unit. Position it for the best signal quality.

Awọn ilana Iṣiṣẹ

Figure 2: Top control panel of the THOMSON CR50 Radio Alarm Clock.

1. Ṣíṣeto Awọn Itaniji (Alarm 1 & Itaniji 2)

CR50 ní àwọn itaniji aládàáni méjì. Láti ṣètò itaniji:

1. Tẹ mọlẹ OOGUN 1 or OOGUN 2 bọtini titi ti akoko itaniji ba tan.
2. Lo awọn HR ati MIN awọn bọtini lati ṣeto akoko itaniji ti o fẹ.
3. Tẹ awọn OOGUN 1 or OOGUN 2 button again to select the alarm source (Buzzer or Radio). An indicator will appear on the display.
4. Tẹ awọn OOGUN 1 or OOGUN 2 button one more time to confirm and activate the alarm.

Lati mu itaniji ṣiṣẹ, tẹ ohun ti o baamu Itaniji bọ́tìnì títí tí àmì ìdánilójú yóò fi pòórá kúrò nínú ìbòjú náà.

2. Iṣẹ lẹẹkọọkan

Nigbati itaniji ba ndun, tẹ tobi ṢEGBE button to temporarily silence the alarm for approximately 9 minutes. The alarm will sound again after this period. To stop the alarm completely, press the AGBARA bọtini.

3. Radio Operation (FM)

1. Tẹ awọn AGBARA bọtini lati tan redio.
2. Tẹ awọn FM bọtini lati yan iye FM.
3. Lo awọn TUNE + or TÚNṢẸ́ - buttons to manually tune to a desired frequency. Press and hold for automatic scanning to the next available station.
4. Lati fipamọ ibudo kan bi tito tẹlẹ:
   1. Tune si ibudo ti o fẹ.
   2. Tẹ awọn MEM (Memory) button. The preset number will flash.
   3. Lo awọn TUNE + or TÚNṢẸ́ - awọn bọtini lati yan nọmba ti a ti ṣeto tẹlẹ ti o fẹ (P01-P20).
   4. Tẹ MEM lẹẹkansi lati jẹrisi.
5. Lati ranti ibudo tito tẹlẹ, tẹ awọn MEM button repeatedly to cycle through saved stations, or use the TẸTẸ + / TẸ̀SẸ̀ TẸ̀LẸ̀ - awọn bọtini.
6. Satunṣe iwọn didun lilo awọn VOL+ / VOL - awọn bọtini.
7. Tẹ awọn AGBARA bọtini lati pa redio naa.

4. Ifihan Imọlẹ Atunse

The display brightness can be adjusted to suit your preference. Press the DIMMER button (often labeled with a sun icon) repeatedly to cycle through different brightness levels (e.g., High, Low, Off).

5. Iṣẹ́ Aago Ìsùn

The sleep timer allows the radio to play for a set duration before automatically turning off. To activate:

1. Nigba ti redio ba ndun, tẹ awọn ORUN button (often labeled with a crescent moon icon).
2. Leralera tẹ awọn ORUN button to cycle through available sleep timer durations (e.g., 10, 20, 30, 60, 90 minutes, or OFF).
3. Redio naa yoo pa laifọwọyi lẹhin akoko ti a yan.

Itoju

Ninu

To clean the unit, unplug it from the power outlet. Use a soft, dry cloth to wipe the surfaces. Do not use abrasive cleaners, waxes, or solvents as they may damage the finish. Avoid getting moisture into any openings.

Batiri Rirọpo

If the clock display or settings are lost during a brief power interruption, the backup batteries may be depleted. Replace the 2 AAA batteries in the battery compartment, ensuring correct polarity.

Laasigbotitusita

Awọn pato

• Brand: Thomson
• Nọmba awoṣe: CR50
• Àwọ̀: Dudu
• Awọn iwọn (L x W x H): 30 x 30 x 30 cm (isunmọ. 11.8 x 11.8 x 11.8 inches)
• Ìwúwo: 250 giramu (isunmọ 0.55 lbs)
• Orisun Agbara: AC Adapter (230V)
• Batiri Afẹyinti: Awọn batiri 2 x AAA (kii ṣe pẹlu)
• Ṣe atilẹyin Awọn ẹgbẹ Redio: FM
• Awọn ẹya pataki: Dual Alarm, Snooze, Sleep Timer, Digital Tuning, Dimmable Display

Atilẹyin ọja ati Support

This product is covered by a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or contact your retailer. For technical support or service inquiries, please contact Thomson customer service or the seller from whom you purchased the product.

Jọwọ ṣe idaduro ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.