Casio Vintage Collection A168 Watch User Manual

Ọrọ Iṣaaju

This manual provides comprehensive instructions for the Casio Vintage Collection A168 digital watch. Please read this manual carefully to ensure proper use and to fully understand the watch's features and functions. Keep this manual for future reference.

Aworan: Iwaju view of the Casio A168 watch on a wrist, showing the digital display.

Key Awọn ẹya ara ẹrọ

• Omi Resistance: Designed to withstand splashes and brief immersion. Not suitable for swimming or diving.
• EL Backlight: Electro-luminescent backlight for easy reading in low light conditions.
• Itaniji Ojoojumọ: A single daily alarm function.
• 1/100 Second Digital Stopwatch: Measures elapsed time, split time, and 1st-2nd place times.
• HourlÀmì Àkókò y: An audible beep at the top of every hour.
• Kalẹnda alaifọwọyi: Automatically adjusts for months of different lengths, including leap years, until the year 2099.
• Yiye: +/-30 seconds per month.
• Batiri: CR2016 lithium metal battery with an approximate life of 7 years.

Ṣeto

1. Siṣàtúnṣe iwọn Watch Band

The watch band features an adjustable clasp. To adjust the length:

1. Lift the small lever on the clasp using a small tool or fingernail.
2. Slide the clasp along the band to the desired position.
3. Press the lever back down firmly to secure the clasp. Ensure it clicks into place.

Aworan: Ẹyin view of the watch and its adjustable band clasp.

2. Eto Aago Ibẹrẹ

The Casio A168 watch typically has three buttons: Imọlẹ (oke apa osi), MODE (bottom left), and Bẹrẹ/Duro (right). Some models may have an additional button for adjustment on the right side. Refer to the image below for button identification.

Aworan: Apa view of the watch showing the control buttons.

1. Láti Ipò Àkókò, tẹ MODE button three times to enter the Time Setting Mode. The seconds digits will flash.
2. Tẹ awọn Bẹrẹ/Duro bọtini lati tun awọn aaya pada si 00.
3. Tẹ awọn MODE bọtini lati gbe yiyan ti o tan imọlẹ si awọn nọmba wakati.
4. Tẹ awọn Bẹrẹ/Duro button to increase the hour. Hold it down to advance rapidly.
5. Tẹ awọn MODE bọ́tìnì láti gbé àṣàyàn ìfìhàn náà sí àwọn nọ́mbà ìṣẹ́jú.
6. Tẹ awọn Bẹrẹ/Duro bọtini lati mu iṣẹju naa pọ si.
7. Tesiwaju titẹ MODE láti yípo àwọn ètò ọdún, oṣù, àti ọjọ́, láti ṣàtúnṣe ọ̀kọ̀ọ̀kan pẹ̀lú àwọn ètò náà Bẹrẹ/Duro bọtini.
8. Ni kete ti gbogbo eto ba tọ, tẹ bọtini naa MODE bọtini lati jade kuro ni Ipo Eto Akoko ki o pada si Ipo Itọju Akoko.

Awọn ilana Iṣiṣẹ

Lo awọn MODE button to cycle through the different modes: Timekeeping, Alarm, and Stopwatch.

1. Ipo akoko

Èyí ni ipò àìyípadà, tí ó ń fi àkókò lọ́wọ́lọ́wọ́, ọjọ́ ọ̀sẹ̀ àti ọjọ́ hàn. Imọlẹ bọtini lati tan imọlẹ ifihan.

2. Ipo Itaniji

1. Lati Ipo Itọju akoko, tẹ bọtini naa MODE bọ́tìnì lẹ́ẹ̀kan láti wọ Ipò Àríyá. Àkókò àríyá náà yóò hàn.
2. Tẹ awọn Bẹrẹ/Duro button to turn the alarm ON or OFF. An alarm indicator will appear when ON.
3. Lati ṣeto akoko itaniji, tẹ mọlẹ Bẹrẹ/Duro bọtini titi ti wakati awọn nọmba filasi.
4. Tẹ awọn MODE button to change the hour.
5. Tẹ awọn Bẹrẹ/Duro bọtini lati gbe si awọn nọmba iseju.
6. Tẹ awọn MODE bọtini lati yi iseju.
7. Tẹ awọn Bẹrẹ/Duro bọtini lati jẹrisi ati jade eto itaniji.
8. Tẹ awọn MODE bọtini lati pada si Ipo Itoju Akoko.

3. Ipo aago iṣẹju-aaya

1. Lati Ipo Itọju akoko, tẹ bọtini naa MODE button twice to enter Stopwatch Mode. The display will show 00'00"00.
2. Tẹ awọn Bẹrẹ/Duro bọtini lati bẹrẹ aago iṣẹju-aaya.
3. Tẹ awọn Bẹrẹ/Duro bọtini lẹẹkansi lati da aago iṣẹju-aaya duro.
4. To reset the stopwatch to 00'00"00, press the Imọlẹ bọ́tìnì nígbà tí a dúró aago ìdádúró.
5. To measure split times, press the Imọlẹ button while the stopwatch is running. The split time will freeze on the display. Press Imọlẹ lẹẹkansi lati pada si wiwọn akoko ti o ti kọja.
6. Tẹ awọn MODE bọtini lati pada si Ipo Itoju Akoko.

4. Hourly Ifihan agbara Aago

To toggle the Hourly Time Signal (SIG) on or off:

1. Lati Ipo Itọju akoko, tẹ bọtini naa MODE bọ́tìnì lẹ́ẹ̀kan láti tẹ Ìpo Àríyá.
2. Tẹ awọn Imọlẹ button to toggle the Hourly Time Signal ON or OFF. An indicator will appear when ON.
3. Tẹ awọn MODE bọtini lati pada si Ipo Itoju Akoko.

Itoju

1. Omi Resistance

The Casio A168 watch is rated as water resistant. This means it can withstand splashes, rain, and brief immersion in water. It is kii ṣe designed for swimming, diving, or prolonged water exposure. Avoid operating buttons while the watch is wet to prevent water intrusion.

2. Batiri Rirọpo

The watch uses one CR2016 lithium metal battery, with an approximate life of 7 years. When the display becomes dim or functions become erratic, it may be time to replace the battery. Battery replacement should ideally be performed by a qualified watch technician to ensure proper sealing and water resistance.

If replacing the battery yourself, carefully remove the four screws on the back cover, replace the battery, and ensure the gasket is properly seated before re-securing the cover. Improper reassembly can compromise water resistance.

3. Ninu

Mu ese aago ati band pẹlu asọ, gbẹ asọ. Fun idoti alagidi, die-die damp cloth can be used, followed by immediate drying. Avoid using chemical cleaners or solvents, as these can damage the watch's finish or seals.

Laasigbotitusita

Awọn pato

• Nọmba awoṣe: 95210840 (A168)
• Module: 3298
• Awọn iwọn: Approximately 4.3 x 3.3 x 2.7 inches (product packaging dimensions, watch dimensions are smaller)
• Ìwúwo: Isunmọ 1.73 iwon
• Iru Batiri: Irin Litiumu CR2016 (tí ó wà pẹ̀lú rẹ̀)
• Igbesi aye Batiri Isunmọ: ọdun meji 7
• Yiye: +/- 30 iṣẹju-aaya fun oṣu kan
• Omi Resistance: Yes (suitable for splashes, rain; not for swimming/diving)
• Ifihan: Digital pẹ̀lú EL Backlight
• Awọn iṣẹ: Timekeeping, Daily Alarm, 1/100-second Stopwatch, Hourly Time Signal, Auto Calendar

Atilẹyin ọja ati Support

For warranty information and customer support, please refer to the warranty card included with your purchase or visit the official Casio webojula. Jeki ẹri rira rẹ fun eyikeyi awọn ibeere atilẹyin ọja.

Olupese: CASIO