Fulham WH33-120-L

Fulham Workhorse 33 Ballast

Model: WH33-120-L Instruction Manual

1. Ifihan

This manual provides essential information for the safe and efficient installation, operation, and maintenance of the Fulham Workhorse 33 Electronic Fluorescent Ballast, model WH33-120-L. Please read this manual thoroughly before attempting any installation or operation to ensure proper function and safety.

2. Alaye Aabo

IKILO: Risk of electric shock. Installation and servicing should only be performed by qualified personnel. Disconnect power at the circuit breaker or fuse box before installing or servicing this ballast.

  • Always ensure the main power supply is disconnected before working on the electrical system.
  • Rii daju pe voltage supply matches the ballast's specified voltage (120V).
  • Má ṣe lo ballast náà pẹ̀lú wáyà tó ti bàjẹ́ tàbí tí c bá ti bàjẹ́asing ti bajẹ.
  • Rii daju didasilẹ to dara ni ibamu si awọn koodu itanna agbegbe.

3. Eto ati fifi sori

The Fulham Workhorse 33 Ballast is designed for use with 1 to 4 fluorescent lamps. Follow these steps for proper installation:

  1. Ge Agbara: Turn off power at the main circuit breaker before beginning installation.
  2. Iṣagbesori: Securely mount the ballast in a suitable location within the fixture, ensuring adequate ventilation. The ballast dimensions are approximately 6.5 inches (length) x 1.5 inches (width) x 1 inch (height).
  3. Asopọmọra: Connect the ballast according to the wiring diagram provided on the ballast label. Ensure all connections are secure and insulated.
    • Connect the input wires (typically black for line, white for neutral) to the appropriate power supply.
    • Connect the output wires to the lamp holders for 1 to 4 fluorescent lamps.
    • Connect the ground wire to the fixture's ground.
  4. Lamp Fifi sori: Install the fluorescent lamps into their respective lamp awọn dimu.
  5. Pada Agbara pada: Once all connections are verified and secure, restore power to the circuit.
Fulham Workhorse 33 Ballast, model WH33-120-L

An image showing the Fulham Workhorse 33 Ballast, model WH33-120-L. The ballast is rectangular, typically white or metallic, with wiring terminals visible for electrical connections.

4. Awọn ilana Iṣiṣẹ

The Fulham Workhorse 33 Ballast operates automatically once properly installed and powered. Upon restoring power to the circuit, the connected fluorescent lamps should illuminate. No user intervention is required for normal operation.

5. Itọju

The Fulham Workhorse 33 Ballast is designed for long-term, maintenance-free operation. However, periodic inspection can help ensure continued performance:

  • Ninu: Ensure the ballast and surrounding area are free from excessive dust and debris to maintain proper heat dissipation. Disconnect power before cleaning.
  • Ayewo: Periodically check for any visible signs of damage to the ballast casing or wiring. If damage is observed, disconnect power immediately and replace the ballast.
  • Ko si Awọn apakan Iṣẹ Olumulo: This ballast contains no user-serviceable parts. Do not attempt to open or repair the unit.

6. Laasigbotitusita

If the fluorescent lamps connected to the ballast are not operating correctly, consider the following troubleshooting steps:

  • Ko si Imọlẹ:
    • Verify that power is supplied to the fixture and the circuit breaker is not tripped.
    • Ṣayẹwo pe lamps are correctly seated in their holders and are not faulty. Try replacing with known good lamps.
    • Inspect all wiring connections to the ballast and lamps for looseness or damage.
  • Fifẹ Lamps:
    • Rii daju lamps are fully inserted and making good contact.
    • Rọpo lamps that are at the end of their life.
    • Ṣayẹwo fun ipese agbara iduroṣinṣin.
  • If issues persist after performing these checks, the ballast may be faulty and require replacement. Contact a qualified electrician for further assistance.

7. Awọn pato

BrandFulham
Nọmba awoṣeWH33-120-L
Nọmba ti Lamps1-4
Awọn iwọn (L x W x H)6.5" x 1.5" x 1"
UPC / GTIN782298967073

8. Atilẹyin ọja ati Support

This Fulham Workhorse 33 Ballast is covered by the manufacturer's standard warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Fulham website. For technical support or assistance, please contact Fulham customer service directly.

Olupese Webojula: www.fulham.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.