Taymor Duke Passage Lever 32-7910 Instruction Manual

1. Ifihan

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Taymor Duke Passage Lever, model 32-7910. This passage lever is designed for doors that do not require a locking mechanism, such as closet doors or hallway doors. It features a Grade 2 heavy-duty cylindrical design and is finished in satin chrome.

2. Alaye Aabo

• Máa ka gbogbo ìlànà kí o sì lóye wọn nígbà gbogbo kí o tó bẹ̀rẹ̀ sí í fi sori ẹ̀rọ.
• Wear appropriate safety gear, such as safety glasses, during installation.
• Exercise caution when using power tools.
• Pa awọn ẹya kekere kuro lati ọdọ awọn ọmọde.

3. Package Awọn akoonu

Daju pe gbogbo awọn paati wa ṣaaju ki o to bẹrẹ fifi sori:

• Duke Passage Lever Assemblies (2)
• Latch Bolt
• Kọlu Awo
• Iṣagbesori skru
• Thru-bolt Anti-sag Kit

This image displays the Taymor Duke Passage Lever, model 32-7910, featuring a sleek design with a satin chrome finish. The lever is shown from a slight angle, highlighting its ergonomic shape and the escutcheon plate.

4. Awọn irinṣẹ ti a beere

• Phillips Head screwdriver
• Teepu Idiwon
• Ikọwe
• Drill (optional, for new installations)
• Wood Chisel (optional, for new installations)

5. Eto ati fifi sori

5.1 Múra Ilẹ̀kùn sílẹ̀

1. Ensure the door has standard bore holes (typically 2-1/8 inches for the lever and 1 inch for the latch bolt).
2. Mark the center of the door edge for the latch bolt.

5.2 Install the Latch Bolt

1. Insert the latch bolt into the hole on the door edge, ensuring the bevel faces the door frame.
2. Fi àwọn skru tí a pèsè so boluti latch náà mọ́.

5.3 Install the Lever Assemblies

1. Align the spindle of one lever assembly with the latch bolt mechanism.
2. Place the other lever assembly on the opposite side of the door, ensuring the thru-bolt anti-sag kit components align.
3. Secure both lever assemblies using the mounting screws, tightening them evenly to prevent misalignment.

5.4 Install the Strike Plate

1. Mú àwo ìkọlù náà tò pẹ̀lú bílítì ìdènà lórí férémù ìlẹ̀kùn.
2. Mark and chisel out a shallow recess for the strike plate if necessary.
3. Fi àwọn skru tí a pèsè so àwo ìkọlù náà mọ́.

5.5 Test Operation

Open and close the door several times, operating the lever to ensure smooth and proper function. The latch bolt should retract and extend without binding.

6. Awọn ilana Iṣiṣẹ

The Taymor Duke Passage Lever is designed for simple operation. To open the door, depress the lever handle downwards. The latch bolt will retract, allowing the door to open. Release the lever, and the latch bolt will extend, securing the door in the closed position. This lever does not include a locking mechanism.

7. Itọju

• Ninu: Clean the lever with a soft, damp Aṣọ. Yẹra fún àwọn ohun ìfọṣọ, àwọn ohun tí a fi ń pa nǹkan, tàbí àwọn kẹ́míkà líle, nítorí pé àwọn wọ̀nyí lè ba ìparí rẹ̀ jẹ́.
• Lubrication: Periodically, a small amount of silicone-based lubricant can be applied to the latch bolt mechanism to ensure smooth operation. Do not use oil-based lubricants.
• Titọpa: Check mounting screws periodically and tighten if necessary to prevent looseness.

8. Laasigbotitusita

• Lever is loose: Check and tighten the mounting screws. Ensure the thru-bolt anti-sag kit is properly installed.
• Latch bolt does not retract smoothly: Ensure the latch bolt is installed correctly and not binding. Apply a small amount of silicone lubricant if needed. Check for obstructions in the door frame or strike plate.
• Ilẹ̀kùn kì í ti pa dáadáa: Verify the strike plate is correctly aligned with the latch bolt. Adjust the strike plate position if necessary.

9. Awọn pato

10. Atilẹyin ọja ati Support

Taymor products are manufactured to high-quality standards and are backed by a manufacturer's warranty. For specific warranty details, product support, or to inquire about replacement parts, please contact Taymor customer service directly. Contact information can typically be found on the official Taymor webaaye tabi apoti ọja.