Sentry BT900

Sentry BT900 On-Neck Bluetooth Headphones User Manual

Ọrọ Iṣaaju

This manual provides instructions for the Sentry BT900 On-Neck Bluetooth Headphones. It covers setup, operation, maintenance, and troubleshooting to ensure proper use of your wireless audio device.

Package Awọn akoonu

Rí i dájú pé àwọn nǹkan wọ̀nyí wà nínú àpò ọjà rẹ:

  • Sentry BT900 On-Neck Bluetooth Headphones
  • Okun Ngba agbara USB
  • Assorted Ear Tips
  • Itọsọna olumulo

Ọja Pariview

Familiarize yourself with the components of your Sentry BT900 headphones.

Sentry BT900 On-Neck Bluetooth Headphones showing the neckband and earbuds

The image displays the Sentry BT900 headphones, featuring a flexible neckband designed for comfortable wear. The earbuds are connected to the neckband, and control buttons are typically located on one side of the neckband for easy access.

Awọn eroja pataki:

  • Bọtini Agbara/Iṣẹ-pupọ: Used for powering on/off, play/pause, answering/ending calls.
  • Iwọn didun Soke/Bọtini orin atẹle: Increases volume, skips to the next track.
  • Iwọn didun isalẹ/Bọtini orin ti iṣaaju: Decreases volume, skips to the previous track.
  • Ibudo Ngba agbara USB Micro-USB: Fun sisopọ okun gbigba agbara.
  • Atọka LED: Ṣe afihan agbara, gbigba agbara, ati ipo isopọmọ.
  • Gbohungbohun: Fun ipe ti ko ni ọwọ.

Ngba agbara si Awọn Agbekọri

Before initial use, fully charge the headphones.

  1. Connect the small end of the USB charging cable to the Micro-USB port on the headphones.
  2. So opin okun gbigba agbara USB pọ mọ orisun agbara USB (fun apẹẹrẹ, ibudo USB kọmputa, adapter odi USB).
  3. The LED indicator will illuminate during charging and change color or turn off when charging is complete.
  4. Gbigba agbara ni kikun maa n gba to awọn wakati 2-3.

Pipọpọ pẹlu Ẹrọ Bluetooth kan

Follow these steps to connect your headphones to a Bluetooth-enabled device:

  1. Ensure the headphones are turned off and fully charged.
  2. Tẹ mọlẹ Bọtini agbara / Olona-iṣẹ for approximately 5-7 seconds until the LED indicator flashes red and blue alternately, indicating pairing mode.
  3. On your Bluetooth-enabled device (smartphone, tablet, etc.), navigate to the Bluetooth settings.
  4. Mu Bluetooth ṣiṣẹ ki o wa awọn ẹrọ to wa.
  5. Select 'Sentry BT900' from the list of found devices.
  6. Once paired, the LED indicator on the headphones will typically flash blue slowly or turn solid blue.
  7. If a passcode is requested, enter '0000'.

Ṣiṣẹ Awọn Agbekọri

Titan/Apapa:

  • Agbara Tan: Tẹ mọlẹ Bọtini agbara / Olona-iṣẹ for 3 seconds. The LED indicator will flash blue.
  • Agbara Pa: Tẹ mọlẹ Bọtini agbara / Olona-iṣẹ for 3 seconds. The LED indicator will flash red and then turn off.

Sisisẹsẹhin orin:

  • Ṣiṣẹ/Daduro: Tẹ awọn Bọtini agbara / Olona-iṣẹ lẹẹkan.
  • Orin t’okan: Tẹ mọlẹ Bọtini Iwọn didun Up.
  • Tẹlẹ Orin: Tẹ mọlẹ Bọtini Iwọn didun isalẹ.

Isakoso ipe:

  • Idahun/Ipe Ipari: Tẹ awọn Bọtini agbara / Olona-iṣẹ lẹẹkan.
  • Kọ Ipe: Tẹ mọlẹ Bọtini agbara / Olona-iṣẹ fun 2 aaya.
  • Nọmba Ikẹhin Tun Tun: Double-tẹ awọn Bọtini agbara / Olona-iṣẹ.

Iṣakoso iwọn didun:

  • Mu iwọn didun pọ si: Tẹ awọn Bọtini Iwọn didun Up leralera.
  • Din iwọn didun silẹ: Tẹ awọn Bọtini Iwọn didun isalẹ leralera.

Itoju

Ninu:

Gently wipe the headphones and earbuds with a soft, dry cloth. For ear tips, remove them and clean with a mild soap solution if necessary, then rinse and dry completely before reattaching.

Ibi ipamọ:

Tọ́jú àwọn agbekọri náà sí ibi tí ó tutù tí ó sì gbẹ, tí kò sí ìmọ́lẹ̀ oòrùn tààrà àti ooru tó le koko. Má ṣe gbé àwọn nǹkan tó wúwo lé wọn lórí.

Itọju Batiri:

Lati pẹ aye batiri, yago fun gbigba agbara si batiri ni kikun nigbagbogbo. Gba agbara si awọn agbekọri nigbagbogbo, paapaa ti ko ba wa ni lilo fun awọn akoko ti o gbooro sii.

Laasigbotitusita

Awọn agbekọri ko ṣiṣẹ lori:

Ensure the headphones are fully charged. Connect to a power source and attempt to power on after a few minutes.

Ko le so pọ pẹlu ẹrọ:

Ensure the headphones are in pairing mode (flashing red and blue LED). Make sure Bluetooth is enabled on your device and it is within range (typically 10 meters). Turn off and on both the headphones and the device, then try pairing again.

Ko si ohun tabi iwọn kekere:

Check the volume levels on both the headphones and your connected device. Ensure the headphones are properly paired and connected. Try re-pairing the headphones.

Didara ohun ti ko dara:

Ensure there are no obstructions between the headphones and your device. Move closer to your device. Check for interference from other wireless devices.

Awọn iṣoro gbigba agbara:

Verify the USB cable is securely connected to both the headphones and the power source. Try a different USB cable or power source.

Awọn pato

  • Awoṣe: BT900
  • Imọ-ẹrọ Ibaraẹnisọrọ Alailowaya: Bluetooth
  • Iru Batiri: 1 Lithium ion (pẹlu)
  • Ìwọ̀n Nkan: 2.39 iwon
  • Awọn iwọn ọja: 8.25 x 1.5 x 6.75 inches
  • Awọn ẹya pataki: Gbohungbohun ti o wa pẹlu, Alailowaya
  • UPC: 080068549000

Atilẹyin ọja ati Support

For warranty information, please refer to the documentation included with your purchase or contact Sentry customer support.

Jeki ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.