myTouchSmart Digital Bar Outlet Timer (Model 26745) Instruction Manual

Ọrọ Iṣaaju

This manual provides instructions for the setup, operation, and maintenance of your myTouchSmart Digital Bar Outlet Timer, Model 26745. Please read these instructions carefully before use and retain them for future reference.

The myTouchSmart Digital Bar Outlet Timer is designed to automate the ON/OFF cycles of indoor lights, lamps, small appliances, and electronics. It features a space-saving design, a digital display, and two programmable custom ON/OFF times.

Awọn Itọsọna Aabo pataki

• Fun lilo inu ile nikan.
• Do not exceed electrical ratings: 125V AC, 60Hz, 15A (1875W) General Purpose/Resistive, 5A (625W) Tungsten, 1/2 HP.
• Do not use with appliances that have heating elements, such as coffee makers, toasters, or heaters, as this may create a fire hazard.
• Ensure the timer is fully inserted into the outlet.
• Do not immerse in water or use in wet locations.
• Keep children away from the timer.
• Do not disassemble the unit. There are no user-serviceable parts inside.

Ọja Awọn ẹya ara ẹrọ

• Space-saving slim bar design.
• One (1) polarized outlet.
• Digital display for easy programming.
• Two custom daily ON/OFF times.
• Backup battery to save settings during power outages.
• Compatible with CFL, LED, incandescent, and halogen light sources.

Apejuwe aworan: A detailed diagram of the myTouchSmart Digital Bar Outlet Timer, highlighting its components such as the custom ON/OFF time buttons, clock/set mode indicator, active program indicator, AM/PM indicator, and scroll buttons. This image helps users identify the different parts of the timer for programming.

Eto ati Iṣeto Ibẹrẹ

1. Charging the Backup Battery

Before initial use, plug the timer into a live electrical outlet for at least 30 minutes to charge the internal backup battery. This battery retains your settings during power outages or when the timer is unplugged.

2. Ṣíṣeto Àkókò Lọ́wọ́lọ́wọ́

1. Tẹ mọlẹ Aago bọtini.
2. Nigba dani Aago, tẹ awọn ▲ (soke) tabi ▼ (down) button to adjust the hour. The AM/PM indicator will change accordingly.
3. Tu silẹ Aago button when the correct hour is set.
4. Tẹ mọlẹ Aago bọtini lẹẹkansi.
5. Nigba dani Aago, tẹ awọn ▲ (soke) tabi ▼ (down) button to adjust the minutes.
6. Tu silẹ Aago button when the correct minute is set.

Apejuwe aworan: This image illustrates the "Simple Setup" process for the timer. It shows the digital display and buttons, with arrows pointing to the scroll buttons for setting the current time and the "my on time" and "my off time" buttons for custom programming. The image emphasizes the ease of setting up the device.

Awọn ilana Iṣiṣẹ

Programming Custom ON/OFF Times

The timer allows for two custom daily ON/OFF programs. Follow these steps to set your desired schedules:

Eto 1:

1. Tẹ awọn MY ON TIME button (left side) once. The display will show "1 ON".
2. Tẹ awọn ▲ (soke) tabi ▼ (down) button to adjust the desired ON hour for Program 1.
3. Tẹ awọn MY ON TIME bọtini lẹẹkansi lati jẹrisi wakati naa ki o gbe si awọn iṣẹju.
4. Tẹ awọn ▲ (soke) tabi ▼ (down) button to adjust the desired ON minutes for Program 1.
5. Tẹ awọn MY ON TIME button again to save the ON time.
6. Tẹ awọn MY OFF TIME button (left side) once. The display will show "1 OFF".
7. Tẹ awọn ▲ (soke) tabi ▼ (down) button to adjust the desired OFF hour for Program 1.
8. Tẹ awọn MY OFF TIME bọtini lẹẹkansi lati jẹrisi wakati naa ki o gbe si awọn iṣẹju.
9. Tẹ awọn ▲ (soke) tabi ▼ (down) button to adjust the desired OFF minutes for Program 1.
10. Tẹ awọn MY OFF TIME button again to save the OFF time.

Eto 2:

Repeat the steps above using the MY ON TIME ati MY OFF TIME awọn bọtini lori awọn apa ọtun of the timer. The display will show "2 ON" and "2 OFF" respectively.

Apejuwe aworan: This image displays two examples of how to program the timer. Program 1 is set to turn ON at 6:00 A.M. and OFF at 9:00 A.M. Program 2 is set to turn ON at 4:00 P.M. and OFF at 10:00 P.M. This visual guide helps users understand how to set their own custom schedules.

Connecting an Appliance

Once programmed, plug the appliance or light you wish to control into the polarized outlet on the side of the timer. Ensure the appliance's power switch is in the ON position for the timer to control its power cycle.

Apejuwe aworan: The image shows the myTouchSmart Digital Bar Outlet Timer plugged into a standard wall outlet. A lamp's power cord is then plugged into the polarized outlet on the side of the timer, demonstrating how to connect a device for timed operation. The slim design of the timer is visible, not obstructing the second wall outlet.

Itoju

• Ninu: Disconnect the timer from the power outlet before cleaning. Wipe with a dry, soft cloth. Do not use liquid or abrasive cleaners.
• Batiri: The internal backup battery is not user-replaceable. If the display becomes dim or settings are not retained after charging, the unit may need replacement.
• Ibi ipamọ: Tọju aago naa ni itura, aye gbigbẹ nigbati ko si ni lilo.

Laasigbotitusita

Awọn pato

• Awoṣe: 26745
• Itanna Itanna: 125V AC, 60Hz
• Ikojọpọ ti o pọju: 15A (1875W) General Purpose/Resistive
• Ẹrù Tungsten: 5A (625W)
• Ẹrù mọto: 1 / 2 HP
• Awọn ita: 1 Polarized
• Awọn iwọn: Isunmọ 2 x 2.5 x 1.25 inches
• Ijẹrisi: CSA

Atilẹyin ọja ati Support

This product is backed by a one-year limited warranty. For warranty claims or technical support, please contact myTouchSmart customer service. Refer to the product packaging or the manufacturer's webojula fun alaye olubasọrọ.

Olupese: Jasco Products Company, LLC