Symcode Mj-2877L 1D Mini Wireless Handheld Laser Barcode Scanner User Manual

1. Ifihan

The Symcode Mj-2877L is a versatile 1D mini wireless handheld laser barcode scanner designed for efficient data collection across various platforms. It supports both Bluetooth 4.0 and 2.4G wireless connectivity, making it compatible with POS systems, Android, iOS, iMac, and iPad devices. This manual provides comprehensive instructions to help you set up, operate, and maintain your scanner.

2. Ọja Ipariview ati irinše

Familiarize yourself with the key parts of your Symcode Mj-2877L barcode scanner:

olusin 1: Ọja irinše. Ohun exploded view diagram highlighting key components of the scanner: indicator lights, scan window, ON/OFF button, scanning switch, battery compartment, and hand strap attachment point.

• Wiwo Ferese: Emits the laser beam for scanning barcodes.
• Awọn imọlẹ Atọka: Provide status feedback (e.g., power, connection, scan success).
• Bọtini TAN/PA: Fi agbara ẹrọ si tan tabi pa.
• Scanning Switch: Activates the laser for scanning.
• Abala Batiri: Houses the rechargeable lithium-ion battery.
• Hand Strap Attachment: For securing a hand strap (included).

3. Eto

3.1 Batiri sori ati gbigba agbara

Figure 2: Battery Installation and Charging. A visual guide demonstrating how to open the battery compartment, insert the lithium-ion battery, close the compartment, and connect the scanner to a USB charging cable.

1. Ṣii ideri iyẹwu batiri naa.
2. Insert the provided DC 3.7V, 1000mA Li-ion battery, ensuring correct polarity.
3. Pa ideri batiri naa ni aabo.
4. Connect the scanner to a USB power source using the included charging cable. The charging time is approximately 3 hours.

3.2 So Agekuru igbanu

To attach the belt clip, align it with the screw holes on the back of the scanner and secure it using the provided screws. To remove, simply unscrew.

4. Asopọmọra

The Symcode Mj-2877L supports two primary wireless connection methods:

Figure 3: Wired and Wireless Modes. This diagram shows two main modes: wired connection via USB cable for charging and data transmission, and wireless modes (2.4G for computers, Bluetooth for mobile devices) without needing driver installation for mobile.

4.1 2.4G Wireless Mode (for PC/POS Machine)

Figure 4: 2.4G Wireless Connection. The scanner is shown in use, with its laser active, and a separate image illustrates the 2.4G wireless USB receiver plugged into a laptop.

1. Insert the provided USB wireless receiver into an available USB port on your PC or POS machine.
2. Turn on the barcode scanner. It should automatically connect to the receiver.
3. Scanner ti šetan fun lilo.

4.2 Bluetooth Mode (for Smartphones, Tablets, Laptops)

Figure 5: Bluetooth Compatibility. The scanner is depicted with wireless signals connecting to a laptop, smartphone, and tablet, indicating its Bluetooth compatibility across Windows, Apple, and Android operating systems.

1. Turn on the barcode scanner.
2. Long press the scan button for 8 seconds to activate Bluetooth pairing mode. The indicator light will flash.
3. On your smartphone, tablet, or laptop, go to Bluetooth settings and search for available devices.
4. Select the scanner (e.g., "Symcode Scanner") from the list to pair.
5. Once paired, the indicator light will turn solid, and the scanner is ready for use. No USB wireless receiver is needed for Bluetooth connections.

4.3 Alailowaya Range

Àwòrán 6: Ìwọ̀n Aláìlókùn. A diagram illustrating the scanner's wireless range: up to 100 feet (30m) indoors for 2.4G wireless and up to 330 feet (100m) outdoors, and up to 33 feet (10m) for Bluetooth connections with mobile devices.

• Alailowaya 2.4G: Up to 100 feet (30m) indoors, up to 330 feet (100m) outdoors.
• Bluetooth: Up to 33 feet (10m) with mobile devices.

5. Awọn ọna ṣiṣe

The scanner supports various operating modes to suit different needs:

5.1 Instant Upload Mode

In this mode, scanned barcode data is immediately transmitted to the connected device (PC, smartphone, tablet). This is ideal for real-time inventory management or POS transactions.

5.2 Ipo ipamọ

Àwòrán 7: Agbára Ìtọ́jú Tóbi. The scanner is shown with an icon representing a floppy disk and "16M" text, indicating its 16MB storage capacity, capable of storing over 50,000 codes in storage working mode.

The scanner features 16MB of internal storage, capable of holding over 50,000 barcode entries. In storage mode, scanned data is saved internally and can be uploaded to your device later. This is useful when working out of range or when real-time transmission is not required.

5.3 Continuous Scanning Mode

To activate continuous scan mode, scan the corresponding barcode from the 'Solutions to Common Problems' section (see Section 7.1). In this mode, the scanner will continuously emit its laser, allowing for rapid scanning of multiple items without pressing the trigger for each scan.

5.4 Handheld and Static Modes

The scanner can be used in handheld mode for mobile scanning or placed on a compatible stand (if available) for static, hands-free operation, automatically scanning barcodes presented to it.

6. Ipilẹ isẹ

Figure 8: Scanning a Barcode. A hand holds the scanner, aiming its red laser at a barcode, demonstrating the scanning action.

1. Ensure the scanner is powered on and connected to your device via 2.4G wireless or Bluetooth.
2. Tọka si awọn ọlọjẹ window ni awọn kooduopo ti o fẹ lati ọlọjẹ.
3. Press the scanning switch. A red laser line will appear.
4. Align the red laser line across the entire barcode.
5. Upon successful scan, the scanner will emit a beep (if not muted) and the indicator light will flash. The barcode data will appear on your connected device.

7. Advanced Settings and Troubleshooting

The Symcode Mj-2877L can be configured using special barcodes found in the 'Solutions to Common Problems' section of the manual or via menu options on models with screens.

Figure 9: Configuration Barcodes. A series of barcodes labeled for specific functions: Factory Restore (0B Initialization), Serial Mode (000601), Auto Continuous Scan Mode (013304), iOS keyboard double click show or hide (%%BT_Pads_En), Shut Sound (014200), and Bluetooth initialization. Users scan these barcodes to apply the settings.

7.1 Common Configuration Barcodes

Scan the following barcodes to apply specific settings:

• Imupadabọ ile-iṣẹ: Ṣayẹwo 0B Initialization to reset the scanner to its default factory settings.
• Ipò Tẹlentẹle: Ṣayẹwo 000601 Serial Mode for serial data transmission.
• Ipo Ṣiṣayẹwo Tesiwaju: Ṣayẹwo 013304 Auto Continuous Scan Mode to enable continuous scanning.
• iOS Keyboard Toggle: Ṣayẹwo %%BT_Pads_En iOS keyboard double click show or hide to toggle the iOS virtual keyboard.
• Turn Beep Off: Ṣayẹwo 014200 Shut Sound to mute the scanner's beep sound.
• Bluetooth Initialization: Ṣayẹwo Ibẹrẹ Bluetooth to re-initialize Bluetooth settings.

7.2 Advanced Menu Settings (if applicable)

For models with an LCD screen, additional settings can be accessed directly through the menu. These may include:

• Ìfilélẹ̀ Keyboard: Adjust for different regional keyboard layouts.
• Iyipada: Select appropriate encoding (e.g., GBK, UTF) for data output.
• Awọn ohun: Adjust volume and frequency of beeps.
• Gbigbọn: Enable or disable vibration feedback.
• Ipo gbigbe: Configure inventory and data upload settings.
• Akoko orun: Set the duration before the scanner enters sleep mode to conserve battery.

8. Awọn pato

9. Itọju

To ensure the longevity and optimal performance of your Symcode Mj-2877L barcode scanner, follow these maintenance guidelines:

• Ninu: Use a soft, dry cloth to clean the scanner's exterior. For the scan window, use a lint-free cloth and a mild glass cleaner. Avoid abrasive materials or harsh chemicals.
• Ibi ipamọ: Tọ́jú ẹ̀rọ ìwádìí náà sí ibi tí ó tutù tí ó sì gbẹ, tí kò sí ìmọ́lẹ̀ oòrùn tààrà àti igbóná tó le koko.
• Itọju Batiri: Fully charge the battery before first use. If storing for extended periods, charge the battery every 3 months to prevent deep discharge.
• Yago fun awọn isọ silẹ: While durable, avoid dropping the scanner to prevent damage to internal components or the scan window.

10. Atilẹyin ọja ati Support

Your Symcode Mj-2877L barcode scanner comes with a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact Symcode customer service through their official webaaye tabi alaye olubasọrọ ti a pese ninu apoti ọja rẹ.