Orbit B-hyve Indoor/Outdoor WiFi Sprinkler System User Manual

Ọrọ Iṣaaju

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Orbit B-hyve Indoor/Outdoor 12 Station WiFi Sprinkler System, model 57950, and the accompanying 12 Rain Catch Cups. Please read this manual thoroughly before installation and operation to ensure proper use and to maximize the lifespan of your product.

Image: The Orbit B-hyve Indoor/Outdoor 12 Station WiFi Sprinkler System (left) with its control panel and display, alongside a white Orbit Rain Catch Cup with a green stake (right).

Alaye Aabo pataki

Nigbagbogbo ṣe akiyesi awọn iṣọra ailewu atẹle lati dinku eewu ipalara tabi ibajẹ:

• Ka gbogbo awọn ilana ni pẹkipẹki ṣaaju fifi sori ẹrọ ati ṣiṣẹ.
• Disconnect power before performing any maintenance or wiring.
• Ensure the product is installed in a location protected from direct water spray, unless specifically designed for outdoor exposure.
• Use only approved wiring and connectors.
• Keep children away from the sprinkler system during operation.

Eto ati fifi sori

Awọn akoonu idii:

• Orbit B-hyve 12-Station WiFi Sprinkler Timer
• Adapter agbara
• Ohun elo iṣagbesori (awọn skru, awọn ìdákọró)
• 12 Rain Catch Cups
• Quick Bẹrẹ Itọsọna

Gbigbe Aago:

1. Choose a suitable indoor or outdoor location near a power outlet and away from direct sunlight or extreme weather.
2. Mark the desired mounting points using the timer as a template.
3. Lu awọn ihò awaoko ki o si fi awọn ìdákọró odi ti o ba jẹ dandan.
4. Secure the timer to the wall using the provided screws.

Wiring the Sprinkler Valves:

Connect your sprinkler valve wires to the corresponding terminals on the B-hyve timer. Each station (1-12) corresponds to a specific zone. Ensure the common wire from your valves is connected to the "COMMON" terminal.

• Waya ti o wọpọ: Connect to the terminal labeled "COMMON".
• Awọn okun agbegbe: Connect each zone wire to its respective numbered terminal (1-12).
• Master Valve/Pump Start (if applicable): Connect to the terminal labeled "MV" or "PUMP".

Asopọ agbara:

Plug the power adapter into the timer's power input port, then plug the adapter into a standard electrical outlet. The timer display should illuminate.

Rain Catch Cup Installation:

The included rain catch cups are used to measure precipitation and help calibrate your sprinkler system for optimal water efficiency. Distribute the 12 cups evenly across your lawn or garden areas, ensuring they are placed in open spaces away from obstructions like trees or buildings that might block rain or sprinkler spray.

• Insert the green stake into the ground until the cup is stable and upright.
• Ensure the top of the cup is level with the ground for accurate measurement.

Awọn ilana Iṣiṣẹ

Initial Setup and WiFi Connection:

1. Download the "B-hyve" app from the Apple App Store or Google Play Store.
2. Create an account and follow the in-app instructions to add your new B-hyve timer.
3. The app will guide you through connecting the timer to your home WiFi network.

Awọn iṣeto siseto:

The B-hyve system offers flexible programming options via the app or directly on the timer.

• Agbe Smart: Utilize the app's smart watering feature, which uses local weather data to automatically adjust watering schedules.
• Awọn eto afọwọṣe: Create custom watering schedules with specific start times, run times, and days of the week for each zone.
• Idaduro Ojo: Use the "RAIN DELAY" button on the timer or the app to pause watering for a set period (24, 48, or 72 hours) in anticipation of rain.

Isẹ afọwọṣe:

You can manually run a single zone or all zones directly from the timer or the app.

• Lori Aago: Navigate to "MANUAL" using the dial, select the zone(s) and desired run time, then press "START".
• Nipasẹ App: Select the desired zone(s) and initiate a manual run from the app interface.

Itoju

• Ninu: Periodically wipe the timer's exterior with a damp asọ. Ma ṣe lo awọn olutọpa abrasive tabi fi omi mọlẹ kuro ninu omi.
• Igba otutu: In freezing climates, disconnect the timer from power and drain all water from the system to prevent freeze damage to pipes and valves. Store the timer indoors during winter months.
• Rain Catch Cups: Regularly empty and clean the rain catch cups to ensure accurate readings. Remove any debris that may accumulate inside.

Laasigbotitusita

Awọn pato

• Awoṣe: 57950
• Brand: Orbit
• Nọmba Awọn Ibusọ: 12
• Asopọmọra: WiFi (2.4 GHz)
• Ohun elo: Ṣiṣu
• Àwọ̀: Funfun
• Indoor/Outdoor Rating: Bẹẹni
• UPC: 816602020007
• ASIN: B06XT21KD7

Alaye atilẹyin ọja

Orbit products are manufactured to high quality standards. For specific warranty details, including duration and coverage, please refer to the warranty card included with your product or visit the official Orbit webojula. Tọju iwe-ẹri rira rẹ bi ẹri rira fun awọn iṣeduro atilẹyin ọja.

Onibara Support

For technical assistance, troubleshooting, or general inquiries, please contact Orbit customer support:

• Webojula: www.orbitonline.com
• Foonu: Tọkasi apoti ọja tabi webojula fun awọn julọ lọwọlọwọ olubasọrọ awọn nọmba.
• Atilẹyin Ohun elo: Many common issues can be resolved through the B-hyve app's help section.