Valore 7 Retrofit Easy Install Shower Panel

1. Ọja Ipariview

The Valore 7 shower panel is designed for retrofit installation into existing shower systems that include a cold and hot faucet. It connects to an existing shower head spout. The panel body is constructed from durable 304 stainless steel, offering a modern aesthetic for bathroom upgrades.

This shower panel features a 3-way shower spray mode system, allowing for versatile water delivery options. It includes a brass shower wand with a brass shower cradle for handheld use.

Image 1.1: Valore 7 Shower Panel installed in a modern bathroom setting.

2. Alaye Aabo

• Rí i dájú pé gbogbo àwọn ọ̀nà omi ni a ti pa kí a tó bẹ̀rẹ̀ sí í fi sori ẹ̀rọ.
• Wọ ohun elo aabo ti ara ẹni ti o yẹ, gẹgẹbi awọn gilaasi aabo ati awọn ibọwọ, lakoko fifi sori ẹrọ.
• Ti o ko ba ni idaniloju nipa eyikeyi apakan ti ilana fifi sori ẹrọ, kan si alagbawo plumber ti o peye.
• Do not use abrasive cleaners or harsh chemicals on the shower panel's surface, as this may damage the finish.

3. Package Awọn akoonu

Daju pe gbogbo awọn paati wa ṣaaju ki o to bẹrẹ fifi sori:

• Shower Panel Unit
• Shower Head
• Shower Wand (Handheld Shower)
• Shower Cradle for Handheld Shower
• Iṣagbesori Hardware
• Flexible Hoses for Water Connection
• Ilana fifi sori ẹrọ

4. Awọn pato

5. Awọn iwọn

Wo àwòrán tó wà ní ìsàlẹ̀ yìí fún àwọn ìwọ̀n ọjà tó wà ní ẹ̀kúnrẹ́rẹ́.

Image 5.1: Valore 7 Shower Panel Dimensions Diagram. All measurements are approximate.

6. Awọn ilana fifi sori ẹrọ

The Valore 7 shower panel is designed for easy retrofit installation. It connects to your existing shower head spout and hot/cold water lines.

6.1 Pre-Fifi sori

1. Pa Ipese Omi: Locate and turn off the main water supply to your bathroom or entire home.
2. Remove Existing Fixtures: Carefully remove your current shower head and any other fixtures that will be replaced by the shower panel.
3. Inspect Plumbing: Ensure your existing hot and cold water lines are accessible and in good condition. This panel is designed for systems with existing hot and cold faucets.
4. Water-Saving Regulator: If your water pressure is naturally low, consider not installing any water-saving regulator that may be included with the panel, as it can further reduce flow. If you use the hang-on to the shower pipe method, access to the regulator may be limited after installation.

6.2 Iṣagbesori Panel

5. Ipo: Hold the shower panel against the wall in the desired position. Mark the locations for mounting brackets. Ensure the panel is level.
6. Awọn iho iho: Lu awọn ihò atọ́kùn ní awọn ibi tí a samisi. Fi awọn ìdákọ̀ró ogiri sii ti o ba jẹ dandan.
7. Awọn biraketi to ni aabo: So awọn biraketi iṣagbesori si ogiri nipa lilo awọn skru ti a pese.
8. Panel Attachment: The unit may include double-sided tape for securing it to the wall. Once applied, repositioning is difficult without replacing the tape. Carefully align and press the panel onto the brackets and tape.

6.3 Àwọn Ìlà Omi Tó Sopọ̀

9. Awọn ọna asopọ: Attach the flexible hot and cold water supply hoses from the shower panel to your existing hot and cold water outlets. Ensure all connections are tight to prevent leaks.
10. Iwe Imudani: Connect the handheld shower hose to its designated outlet on the panel.
11. Tan Omi: Slowly turn the main water supply back on and check for any leaks. Tighten connections as needed.
12. Seal Edges (Optional but Recommended): Apply a bead of clear silicone caulk along the sides of the shower panel where it meets the tile to create a seal and prevent water intrusion.

Note: This shower panel does not include a temperature/volume control valve. Your existing shower valve will control water temperature and flow.

7. Awọn ilana Iṣiṣẹ

The Valore 7 shower panel features a 3-way diverter to control water flow to different functions.

7.1 Omi sisan Iṣakoso

Use your existing shower's hot and cold water handles to adjust the desired water temperature and overall flow rate.

7.2 Selecting Spray Modes

The panel has a control knob or lever to switch between the three spray modes:

• Ojo Ojo: Provides a wide, gentle rainfall-like spray from the overhead shower head.


Image 7.1: Valore 7 Shower Panel demonstrating the rain shower function.

• Awọn ọkọ ofurufu ti ara: Delivers targeted streams of water from the integrated body massage jets.

Image 7.2: Valore 7 Shower Panel demonstrating the body jet function.
• Iwe Imudani: Directs water flow to the brass shower wand for focused rinsing or cleaning.

Rotate or move the diverter control to select your desired spray function. Only one function can be active at a time.

8. Itọju

8.1 Ninu

• Clean the stainless steel surface regularly with a soft cloth and mild soap or a non-abrasive stainless steel cleaner.
• Avoid using abrasive sponges, scouring pads, or harsh chemical cleaners, as these can scratch or damage the finish.
• For hard water spots, use a solution of white vinegar and water, then rinse thoroughly.
• Periodically clean the nozzles of the shower head and body jets to remove mineral buildup. You can often do this by gently rubbing the rubber nozzles.

8.2 Itọju Gbogbogbo

• Ensure all connections remain tight to prevent leaks.
• If any part becomes loose, gently tighten it. Do not overtighten.

9. Laasigbotitusita

10. Atilẹyin ọja ati Support

For warranty information or technical support, please refer to the documentation provided with your purchase or contact Valore customer service. Keep your proof of purchase for warranty claims.