1. Ifihan
The TES 1360A Humidity/Temperature Meter is a precision instrument designed for accurate measurement of temperature, relative humidity, and dew point temperature. It features a clear three-line LCD display for simultaneous viewing of measured values. The meter includes advanced functions such as adjustable alarm levels with visual and audio indications, and a memory function to store and recall up to 99 sets of data.
- Ifihan Meji: Shows multiple readings concurrently.
- Ipinnu giga: Provides precise measurements with 0.1% RH, 0.1°C, and 0.1°F resolution.
- Ibi Iwọn Wiwọn: Capable of measuring a broad spectrum of relative humidity and temperature values.
- Òtútù Point Ìri: Automatically computes and displays dew point.
- Iranti Data: Stores and allows recall of up to 99 data sets.
2. Alaye Aabo
Please read and understand all safety instructions before operating the TES 1360A meter. Failure to follow these instructions may result in injury or damage to the device.
- Do not expose the meter to extreme temperatures, direct sunlight, or high humidity for extended periods.
- Yẹra fún jíjá mita náà sílẹ̀ tàbí kí o fi sí ipa líle.
- Do not attempt to disassemble or modify the meter. Refer all servicing to qualified personnel.
- Ensure correct battery polarity when installing batteries. Remove batteries if the meter will not be used for a long time to prevent leakage.
- Keep the meter away from strong electromagnetic fields.
- Clean the meter with a soft, dry cloth. Do not use abrasive cleaners or solvents.
3. Ọja Ipariview
Familiarize yourself with the components of your TES 1360A Humidity/Temperature Meter.
Figure 1: TES 1360A Humidity/Temperature Meter. This image shows the meter's main body, the sensor probe at the top, the LCD display, and various control switches and buttons for temperature, humidity, dew point, hold, power, and memory functions.
Awọn eroja pataki:
- Sensor Probe: Located at the top, responsible for detecting humidity and temperature.
- Ifihan LCD: Three-line display showing humidity, temperature, and dew point readings.
- Function Switches:
- TEMP / %RH / DEW Switch: Selects the primary measurement displayed.
- °C / °F Switch: Ó máa ń yí padà láàrín àwọn ìwọ̀n otútù Celsius àti Fahrenheit.
- HOLD / ON / OFF Switch: Controls power and data hold function.
- Bọtini KA: Used to recall stored data from memory.
- Bọ́tìnì ÌRÁNTÍ: Used to save current readings to memory.
- Abala Batiri: Located at the rear, houses the 9V battery.
4. Eto
4.1 Fifi sori batiri
- Wa ideri ibi ipamọ batiri naa ni ẹhin mita naa.
- Gbe tabi yọ ideri naa kuro lati ṣii yara naa.
- Insert one 9V battery (006P 9V, IEC 6F22, or NEDA 1604 type) into the compartment, ensuring correct polarity (+/-). A 9V battery is included with the meter.
- Rọpo ideri iyẹwu batiri ni aabo.
4.2 Ibẹrẹ Agbara Lori
After installing the battery, slide the ON/OFF switch to the "ON" position. The LCD display will illuminate and show current readings.
5. Isẹ
5.1 Gbigba Awọn wiwọn
- Turn on the meter by sliding the ON/OFF switch to "ON".
- Position the sensor probe in the environment where you wish to take measurements. Allow a few moments for the readings to stabilize.
- The LCD will display the current temperature, relative humidity, and dew point temperature simultaneously.
- To change the primary displayed measurement (e.g., larger font), use the TEMP / %RH / DEW switch.
- To switch between Celsius (°C) and Fahrenheit (°F) temperature units, use the °C / °F switch.
5.2 Data idaduro Išė
To freeze the current readings on the display, slide the HOLD switch to the "HOLD" position. The readings will remain on the screen until the switch is moved back to "ON" or "OFF".
5.3 Data Memory Function
The meter can store up to 99 sets of measurement data.
- Nfi data pamọ: Nígbà tí o bá ń ṣe ìwọ̀n, tẹ ÌRÁNTÍ button briefly to save the current readings. The display may briefly show a memory location number.
- Recalling Data: Tẹ awọn KA button to cycle through the stored data sets. Each press will display the next stored record.
- Iranti piparẹ: Refer to the full instruction manual for details on clearing stored data, if this function is available.
5.4 Alarm Level Indication
The TES 1360A can compare measured values against two adjustable levels for each quantity (temperature, humidity, dew point). If a measured value exceeds or falls below these set levels, the corresponding value on the display will blink, and an audible alarm (if enabled) will sound. Consult the full manual for instructions on setting these alarm levels.
6. Itọju
6.1 Ninu
Nu mita c naaasing pẹlu asọ, damp cloth. Do not use harsh chemicals, solvents, or abrasive cleaners, as these can damage the plastic and electronic components. Ensure no liquid enters the sensor area or other openings.
6.2 Batiri Rirọpo
When the battery indicator appears on the display, or if the meter fails to power on, replace the 9V battery as described in Section 4.1. Always dispose of used batteries responsibly according to local regulations.
6.3 Ibi ipamọ
If the meter will not be used for an extended period, remove the battery to prevent leakage. Store the meter in a cool, dry place, away from direct sunlight and extreme temperatures.
7. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Meter does not turn on. | Batiri ti ku tabi ti ko tọ. | Ṣàyẹ̀wò ìsopọ̀mọ́ra bátírì. Fi bátírì 9V tuntun rọ́pò rẹ̀. |
| Awọn kika ti ko pe. | Sensor dirty or damaged; environmental interference; meter not calibrated. | Clean the sensor carefully. Move away from strong electromagnetic fields. If issues persist, contact customer support for calibration or repair. |
| Display shows "LO" or "HI". | Measurement is outside the meter's specified range. | Ensure the environment's conditions are within the meter's operating range (see Specifications). |
| Iṣẹ́ ìrántí kò ṣiṣẹ́. | Memory full; incorrect button press. | Ensure you are pressing the correct button (MEMORY to save, READ to recall). If memory is full, consult the full manual for clearing instructions. |
8. Awọn pato
| Gbogbogbo Awọn alaye | |
|---|---|
| Brand | TES |
| Awoṣe | TES 1360A |
| Ọja Mefa | 270mm(L) × 68mm(W) × 25mm(H) (approx. 10.63"H x 2.68"W) |
| Iwọn Nkan | Approx. 210g (including battery) / 1.1 pounds |
| Ibi ti ina elekitiriki ti nwa | Single 9V Battery (006P 9V, IEC 6F22, or NEDA 1604) |
| Igbesi aye batiri | Isunmọ. wakati meji 140 |
| Awọn iwọn otutu ti nṣiṣẹ & Ọriniinitutu | 0°C to 60°C (32°F to 140°F), below 95% RH (non-condensing) |
| Ifihan ara | LCD |
| Ohun elo | Ṣiṣu |
| Awọn ẹya ẹrọ | Instruction manual, Battery, Carry case |
| Awọn alaye wiwọn | |
| Iwọn Iwọn Ọriniinitutu | 10% ~ 95% RH |
| Iduro ọriniinitutu | 0.1% RH |
| Yiye Ọriniinitutu |
|
| Iwọn Iwọn Iwọn otutu | -20°C ~ +60°C (-4°F ~ +140°F) |
| Iwọn otutu Ipinnu | 0.1°C, 0.1°F |
| Yiye iwọn otutu |
|
9. Atilẹyin ọja ati Support
For specific warranty information regarding your TES 1360A Humidity/Temperature Meter, please refer to the documentation provided at the time of purchase or contact the seller directly. Warranty terms may vary based on region and retailer.
For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact TES customer support or the authorized distributor from whom you purchased the product. You can also visit the official TES store for more information: TES Official Store.