Ọrọ Iṣaaju
Thank you for choosing the ClearClick Retro AM/FM Radio with Bluetooth. This classic wooden vintage-style speaker combines nostalgic aesthetics with modern functionality, allowing you to enjoy both traditional radio broadcasts and contemporary digital audio. This manual provides essential information for setting up, operating, and maintaining your new radio.
Ọja Pariview
olusin 1: Iwaju view of the ClearClick Retro AM/FM Radio, showcasing its classic wooden design and central tuning dial.
Figure 2: Close-up of the tuning dial and control knobs for FM/AM/BT selection and volume.
The ClearClick Retro Radio features a beautiful, handmade wooden exterior, an easy-to-use tuning dial, and dedicated knobs for mode selection and volume control. It is designed to be powered by a standard North American power plug.
Ṣeto
- Ṣii silẹ: Carefully remove the radio from its packaging. Ensure all components, including the power cord, are present.
- Ibi: Place the radio on a stable, flat surface away from direct sunlight, heat sources, and excessive moisture.
- Asopọ agbara: Insert the included power cord into the AC input on the back of the radio. Plug the other end into a standard North American wall outlet (120V AC, 60Hz).
- Eto Antenna: For optimal FM reception, extend the built-in wire antenna fully. For AM reception, the radio utilizes an internal antenna; repositioning the radio may improve signal strength.
Awọn ilana Iṣiṣẹ
Agbara Tan / Paa ati Iṣakoso Iwọn didun
- To power on the radio, rotate the right-side Iwọn didun knob clockwise until you hear a click.
- To adjust the volume, continue rotating the Iwọn didun koko.
- Láti pa agbára, yí i padà Iwọn didun tẹ bọtini naa ni ọna idakeji-aago titi ti o fi tẹ pa.
AM/FM Redio Isẹ
- Rotate the left-side FM AM BT knob to select either FM or AM mode.
- Tan aarin TUNTUN knob to scan for radio stations. The tuning backlight will illuminate in AM/FM mode.
- Ṣatunṣe awọn TUNTUN knob carefully for clear reception.
Bluetooth Isẹ
- Rotate the left-side FM AM BT koko lati yan BT mode. The radio will enter Bluetooth pairing mode, indicated by a blue LED.
- Lórí ẹ̀rọ Bluetooth rẹ (fún àpẹẹrẹ, fóònù alágbèéká, tábìlẹ́ẹ̀tì), wá àwọn ẹ̀rọ Bluetooth tó wà.
- Select "Vintage Radio" or "ClearClick Radio" from the list to pair.
- Once paired, the blue LED will remain solid, and you can play audio from your device through the radio.
- The radio's tuning backlight stays on even in Bluetooth mode (NEW 2019 feature).
Itoju
- Ninu: Use a soft, dry cloth to wipe the exterior of the radio. Do not use abrasive cleaners or solvents, as they may damage the wooden finish.
- Ibi ipamọ: When not in use for extended periods, store the radio in a cool, dry place, away from extreme temperatures and humidity.
- Afẹfẹ: Ensure the radio has adequate ventilation to prevent overheating. Do not block the ventilation holes on the back.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ko si agbara | Okun agbara ko sopọ; iṣan ko lọwọ. | Ensure power cord is securely plugged into the radio and a working wall outlet. Check if the volume knob is turned on. |
| Gbigba redio ti ko dara | Àmì agbára tí kò lágbára; antenna kò gùn. | Fully extend the FM wire antenna. For AM, try repositioning the radio. Adjust the tuning knob slowly. |
| Bluetooth ko sopọ | Radio not in BT mode; device too far; device already paired. | Ensure radio is in BT mode. Move your device closer to the radio. Unpair "Vintage Radio" from your device's Bluetooth settings and try pairing again. |
| Ko si ohun lati Bluetooth | Volume too low on radio or device. | Increase volume on both the radio and your connected Bluetooth device. |
Awọn pato
- Awọn iwọn ọja: 10.5" (H) x 8" (W) x 6" (D)
- Ìwọ̀n Nkan: 4.74 iwon
- Imọ-ẹrọ Asopọmọra: Bluetooth
- Imọ-ẹrọ Tuner: AM, FM (2-Band)
- Orisun Agbara: Corded Electric (Standard North American Power Plug)
- Awọn eroja to wa: Okun agbara
- Ipele Resistance Omi: Ko Omi Resistant
- Imọ-ẹrọ Ifihan: LCD (for tuning dial backlight)
olusin 3: Apa view illustrating the dimensions of the radio.
Atilẹyin ọja ati Support
The ClearClick Retro AM/FM Radio with Bluetooth comes with a Atilẹyin ọja Ọdun 5 ni kikun. ClearClick is a USA-Based Small Business committed to providing excellent customer support.
For warranty claims or technical assistance, please refer to the contact information provided with your product packaging or visit the official ClearClick webojula. Tọju iwe-ẹri rira rẹ fun ijẹrisi atilẹyin ọja.
Alaye Aabo pataki
Please read and follow all safety instructions provided in the original product packaging. Do not expose the unit to rain or moisture. Do not disassemble the unit; refer all servicing to qualified personnel. Ensure proper ventilation to prevent overheating.