Everycom EC-58 58mm Direct Thermal Printer User Manual

1. Ifihan

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your Everycom EC-58 58mm Direct Thermal Printer. Please read this manual thoroughly before using the printer to ensure proper function and longevity of the device. Keep this manual for future reference.

2. Ọja Ipariview

The Everycom EC-58 is a compact and efficient 58mm direct thermal receipt printer designed for various applications. It offers high-speed printing and supports both 1D and 2D barcode printing. The printer features a USB interface and integrates with cash drawers.

Awọn ẹya pataki:

• 58mm receipt printing capability.
• High-speed printing at 90 mm/second.
• Supports 1D and 2D barcode printing.
• USB interface for connectivity.
• Cash drawer integration support.
• Compatible with Epson ESC/POS print instruction mode.
• Supports Windows XP / 7 / 8 / 10, Linux, and Android operating systems (SDK integration required for Android).

Awọn akoonu idii:

Lẹhin ṣiṣi silẹ, rii daju pe gbogbo awọn nkan ti o wa ni isalẹ wa:

• 1 x Everycom EC-58 Thermal Printer
• 1 x Sample Roll Paper
• 1 x CD-ROM with Drivers
• 1 x Itọsọna olumulo
• 1 x Okun USB
• 1 x Okun Agbara
• 1 x Paper Bering (Spindle)

3. Eto

3.1 Nsopọ itẹwe

1. So okun agbara pọ: Insert the power cable into the power port at the rear of the printer and plug the other end into a suitable power outlet.
2. So okun USB pọ: Connect the square end of the USB cable to the USB port at the rear of the printer and the rectangular end to an available USB port on your computer.
3. Connect Cash Drawer (Optional): If using a cash drawer, connect its cable to the cash drawer port at the rear of the printer.

3.2 Loading Thermal Iwe

1. Ṣii Ideri naa: Press the cover open button or lift the cover release lever to open the printer's top cover.
2. Fi Iyipo Iwe sii: Place the 58mm thermal paper roll into the paper compartment with the printing surface facing upwards. Ensure the roll is seated correctly on the paper spindle.
3. Pa Ideri naa: Pull a small amount of paper out past the cutter and close the top cover firmly until it latches.

3.3 Driver fifi sori

For Windows and Linux operating systems, install the printer drivers from the provided CD-ROM or download them from the official Everycom website. For Android, an SDK needs to be integrated into your application for printer functionality.

4. Awọn ilana Iṣiṣẹ

4.1 Titan / Pa a

To power on the printer, ensure it is connected to a power source and press the power button located on the front panel. To power off, press the power button again.

4.2 Printing a Receipt

Once the printer is connected and drivers are installed, you can print receipts from your compatible software application. The printer will automatically feed and cut the paper after each print job, based on your software settings.

4.3 Self-Test Print

To perform a self-test, ensure the printer is off and paper is loaded. Hold down the FEED button while turning on the printer. Release the FEED button once the printer starts printing. This will print a configuration page, confirming basic printer functionality.

5. Itọju

5.1 Ninu ori itẹwe

Regular cleaning of the thermal print head ensures optimal print quality and extends the printer's lifespan. Use a soft cloth dampened with isopropyl alcohol to gently wipe the print head. Ensure the printer is powered off and cooled down before cleaning.

5.2 Replacing Paper Roll

When the paper roll is depleted or a red line appears on the printout, it indicates low paper. Follow the steps in Section 3.2 to replace the paper roll.

6. Laasigbotitusita

This section addresses common issues you might encounter with your Everycom EC-58 printer.

6.1 Ko si Agbara

• Ṣayẹwo okun agbara: Rii daju pe okun agbara ti sopọ ni aabo si itẹwe mejeeji ati iṣan agbara.
• Jẹrisi iṣan agbara: Ṣe ìdánwò ibi tí agbára iná náà ti ń jáde pẹ̀lú ẹ̀rọ mìíràn láti jẹ́rìí sí i pé ó ṣiṣẹ́ dáadáa.

6.2 No Printing / Blank Output

• Check Paper Roll: Ensure the thermal paper is loaded correctly and the printing surface is facing the print head.
• Fifi sori Awakọ: Verify that the printer drivers are correctly installed on your computer.
• Asopọmọra: Confirm the USB cable is securely connected to both the printer and the computer.
• Ipò Ìtẹ̀wé: Check the printer's status indicator lights for any error messages.

6.3 Ko dara Print Didara

• Ori Atẹwe mimọ: Refer to Section 5.1 for instructions on cleaning the print head.
• Didara iwe: Ensure you are using high-quality thermal paper.

6.4 Driver Not Responding / Printer Stopped Working

• Tun awọn ẹrọ bẹrẹ: Power off both the printer and your computer, then restart them.
• Tun awọn Awakọ sori ẹrọ: If the issue persists, try uninstalling and reinstalling the printer drivers.
• Ṣayẹwo ibudo USB: Gbiyanju lati so itẹwe pọ mọ ibudo USB ti o yatọ lori kọnputa rẹ.

7. Awọn pato

8. atilẹyin ọja Information

The Everycom EC-58 Thermal Printer comes with a 1-year all-India warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your purchase receipt for warranty claims. For detailed warranty terms and conditions, refer to the warranty card included in the package or contact customer support.

9. Onibara Support

For any technical assistance, troubleshooting, or warranty inquiries, please contact Everycom Customer Service.

• Nọmba Ọfẹ: 1800 121 4480
• Awọn wakati iṣẹ: Monday - Saturday, 10:00 AM - 6:30 PM (Except on Public Holidays)