Aerocool Cylon RGB Midi-Tower PC Case - ACCM-PV10012.11 User Manual

1. Ti pariview

The Aerocool Cylon RGB Midi-Tower PC Case, model ACCM-PV10012.11, is designed to house computer components, offering both functionality and aesthetic appeal. It features a side window panel for showcasing internal hardware and an RGB LED illumination strip on the front panel for customizable lighting effects. This case supports ATX motherboards and provides ample space for various components, including multiple storage drives and cooling solutions.

olusin 1: Iwaju view of the Aerocool Cylon RGB Midi-Tower PC Case, highlighting its distinctive RGB LED strip.

2. Package Awọn akoonu

Jọwọ rii daju pe gbogbo awọn nkan wa ninu package:

• Aerocool Cylon RGB Midi-Tower PC Case (ACCM-PV10012.11)
• Àpótí ẹ̀rọ (tí ó ní àwọn skru, àwọn ìdádúró, àwọn okùn okùn, àti bẹ́ẹ̀ bẹ́ẹ̀ lọ)
• Afowoyi Olumulo (iwe-ipamọ yii)

3. Alaye Aabo

Read and understand all safety instructions before installing or operating the PC case. Failure to do so may result in injury or damage to the product.

• Máa yọ agbára iná kúrò nínú ihò ògiri kí o tó ṣe ìfisí tàbí ìtọ́jú èyíkéyìí.
• Fi gbogbo àwọn ẹ̀yà ara ṣe àtúnṣe kí ó má ​​baà ba nǹkan jẹ́.
• Avoid touching electronic components directly; use anti-static precautions if possible.
• Pa awọn ẹya kekere ati awọn ohun elo miiran kuro ni ọwọ awọn ọmọde.
• Rí i dájú pé afẹ́fẹ́ tó yẹ wà ní àyíká àpótí náà kí ó má ​​baà gbóná jù.

4. Eto ati fifi sori

4.1 Ngbaradi Ọran naa

Before installing components, remove the side panels to access the interior of the case.

1. Gbe ọran naa sori alapin, dada iduroṣinṣin.
2. Locate the thumbscrews on the rear of the case securing the side panel.
3. Unscrew the thumbscrews and carefully slide the side panel backward, then lift it off. Repeat for the other side panel if necessary.

Figure 2: Left image shows the side panel attached, right image shows the side panel removed for access.

4.2 Fifi sori modaboudu

The Aerocool Cylon case supports ATX motherboards.

1. Install the I/O shield that came with your motherboard into the opening at the rear of the case.
2. Ensure motherboard standoffs are correctly aligned with your motherboard's screw holes. Install any missing standoffs from the accessory box.
3. Fi pẹ̀lẹ́pẹ̀lẹ́ gbé mótábódì rẹ sí orí àwọn ibi tí wọ́n ti ń dì í, kí o sì ṣe àtúnṣe àwọn ihò skru náà.
4. Fi awọn skru ti o yẹ so mọtoboard naa mọ pẹlu apoti ohun elo.

4.3 Drive Installation (2.5" / 3.5")

The case provides bays for 2.5-inch and 3.5-inch drives.

1. Locate the drive bays within the case. Refer to the case diagram for specific locations.
2. For 3.5-inch HDDs, slide the drive into the designated tray or bay and secure it with screws.
3. For 2.5-inch SSDs, mount the drive onto the designated bracket or tray and secure it with screws.

4.4 Power Ipese Unit (PSU) fifi sori

The PSU is typically mounted at the bottom rear of the case.

1. Slide the PSU into its designated compartment from the rear of the case.
2. Align the PSU's screw holes with those on the case.
3. Secure the PSU with the provided screws.

Fifi sori ẹrọ Kaadi Imugboroosi 4.5 (GPU)

Install your graphics card or other expansion cards into the PCIe slots.

1. Remove the necessary PCI-E slot covers from the rear of the case corresponding to your expansion card's size.
2. Carefully insert the expansion card into the appropriate PCI-E slot on the motherboard until it clicks into place.
3. Secure the expansion card with screws.

olusin 3: Ẹyìn view of the PC case, showing the expansion slots and I/O area.

4.6 Fan / Liquid Cooling Radiator Installation

The Aerocool Cylon case supports various cooling configurations.

• Ẹyìn: 1 x 120mm fan (pre-installed or optional).
• Oke: Supports 2 x 120mm fans or 1 x 240mm radiator.
• Isalẹ: Ṣe atilẹyin fun awọn onijakidijagan 2 x 120mm.

1. Mount fans or radiators to their respective positions using the appropriate screws.
2. So awọn okun agbara afẹfẹ pọ mọ modaboudu tabi oluṣakoso afẹfẹ kan.

Figure 4: An interior shot of the case, illustrating potential fan and liquid cooling radiator placements.

4.7 USB Management

Effective cable management improves airflow and aesthetics.

• Route cables through the cutouts and behind the motherboard tray.
• Use cable ties (included in the accessory box) to bundle and secure cables.

4.8 Ìsopọ̀ Pánẹ́lì Iwájú I/O

So awọn okun iwaju paneli pọ mọ awọn akọle ti o baamu lori modaboudu rẹ.

• USB 3.0: So okun USB 3.0 pọ mọ akọle USB 3.0 ti modaboudu naa.
• USB 2.0: Connect the USB 2.0 cables (x2) to the motherboard's USB 2.0 headers.
• Ohùn HD: So okùn HD Audio pọ̀ mọ́ orí ohun tí modabọọdu náà ní.
• Agbára/Àtúntò/Àwọn LED: Connect the small individual cables (Power SW, Reset SW, HDD LED, Power LED) to the motherboard's front panel headers according to your motherboard manual.

5. Operating the PC Case

Once all components are installed and connected, reattach the side panels and power on your system.

• Agbara Tan: Press the power button located on the top I/O panel of the case.
• Iṣakoso Imọlẹ RGB: The front panel RGB LED illumination can be controlled via a dedicated button on the top I/O panel or through compatible motherboard software, depending on your setup. Refer to your motherboard manual for software control options.

6. Itọju

Regular maintenance helps ensure optimal performance and longevity of your PC case and components.

• Isọdi eruku: The case features dust filters (e.g., on the top and bottom). Regularly remove and clean these filters to prevent dust buildup and maintain good airflow. Use compressed air or a soft brush.
• Isọsọ gbogboogbo: Lo asọ, damp cloth to wipe down the exterior of the case. Avoid abrasive cleaners or solvents. For the transparent side panel, use a microfiber cloth to prevent scratches.

7. Laasigbotitusita

Ti o ba pade awọn iṣoro, ronu awọn igbesẹ laasigbotitusita ti o wọpọ wọnyi:

• Ko si Agbara: Ensure the PSU is properly connected to the wall outlet and the power switch on the PSU is in the 'ON' position. Verify all power cables to the motherboard and components are securely seated.
• Awọn onijakidijagan Ko Yiyi: Check that all fan cables are correctly connected to the motherboard or fan controller. Ensure the system is receiving power.
• RGB Not Working: Confirm RGB cables are properly connected. If using motherboard software, ensure it is installed and configured correctly.
• Awọn isopọ alaimuṣinṣin: Recheck all internal connections (power, data, front panel I/O) to ensure they are firmly seated.

8. Awọn pato

9. atilẹyin ọja Information

The Aerocool Cylon RGB Midi-Tower PC Case is covered by a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official AeroCool website for detailed warranty terms and conditions, including coverage period and claim procedures.

10. Atilẹyin

For further assistance, technical support, or to download the latest drivers and software, please visit the official AeroCool webojula:

Webojula: www.aerocool.io

You may also contact AeroCool customer service through the contact information provided on their webojula.