TESmart 4x1 HDMI Switch HSW0401A1U Instruction Manual

Ọrọ Iṣaaju

The TESmart 4x1 HDMI Switch HSW0401A1U allows you to connect up to four HDMI source devices to a single HDMI display. This device supports 4K@60Hz resolution, HDR, HDCP 2.2, and 3D, providing high-quality video and audio. It also features optical S/PDIF and L/R audio outputs for enhanced audio flexibility. Control is available via front panel buttons or an IR remote control, with an optional automatic switching mode for convenience.

Nọmba 1: The TESmart 4x1 HDMI Switch streamlines connections, allowing multiple input devices to share a single display, reducing cable clutter.

Key Awọn ẹya ara ẹrọ

• 4x1 HDMI Switcher: Connects up to four HDMI source devices to one HDMI display.
• 4K HDMI with Audio Output: Supports 3840x2160@60Hz 4:4:4, HDR, HDCP 2.2, and 1080P 3D. Includes S/PDIF optical and L/R analog audio outputs.
• Multiple Switching Methods: Easily switch between sources using front panel buttons, IR remote control, or automatic detection.
• Ibamu gbooro: Compatible with various HDMI sources such as PlayStation, Xbox, Nintendo Switch, Blu-ray players, set-top boxes, Chromecast, Apple TV, and projectors.
• Ikole ti o tọ: Awọn ẹya aluminiomu alloy casing fun imudara agbara.

Nọmba 2: The switch supports advanced video technologies including 4K@60Hz, HDCP 2.2, HDR 10, and 3D for a high-quality viewiriri iriri.

Nọmba 3: The switch offers broad compatibility with a range of input and output devices, making it versatile for different setups.

Ọja Pariview

Iwaju ati ru Panels

Nọmba 4: Front and Rear Panel Layout of the TESmart 4x1 HDMI Switch.

Awọn ẹya ara Panel Iwaju:

• Olugba IR: Receives signals from the IR remote control.
• Input Selection Status LEDs (1-4): Indicate the currently active HDMI input.
• Bọtini Aṣayan titẹ sii: Manually cycles through HDMI input sources.
• Audio Mode Selection Status LEDs (5.1, 2.0, Auto): Show the selected audio output mode.
• Audio Mode Selection Button: Toggles between 5.1 channel, 2.0 channel, and Auto audio output modes.
• Agbara Yi pada: Tan ẹrọ naa si tan tabi pa.

Awọn ẹya ara Panel Panel:

• Input agbara DC 5V: Connects to the provided 5V DC power adapter.
• Àwọn Ibudo Ìṣíwọlé HDMI (1-4): Connect your HDMI source devices.
• Ibudo Ifihan HDMI: Sopọ si ifihan HDMI rẹ.
• S/PDIF Optical Audio Output: Connects to an optical audio receiver or soundbar.
• AUX L/R Audio Output: Connects to an analog audio system via a 3.5mm jack.

Awọn ilana iṣeto

1. So awọn orisun HDMI pọ: Connect up to four HDMI source devices (e.g., gaming consoles, Blu-ray players, PCs) to the HDMI Input ports (1-4) on the rear panel of the switch using high-quality HDMI cables.
2. Sopọ HDMI Ifihan: Connect your HDMI display (TV, monitor, projector) to the HDMI Output port on the rear panel of the switch using a high-quality HDMI cable.
3. So ìjáde ohùn pọ̀ (Àṣàyàn):
   • For optical audio, connect an S/PDIF optical cable from the switch's S/PDIF port to your audio receiver or soundbar.
   • For analog audio, connect a 3.5mm audio cable from the switch's L/R port to your audio system.
4. So agbara: Plug the provided 5V DC power adapter into the DC 5V input port on the switch, then plug the adapter into a power outlet.
5. Agbara Tan: Turn on the HDMI switch using the power switch on the front panel. The LED indicators will illuminate.

Awọn ilana Iṣiṣẹ

Switching HDMI Inputs

Nọmba 5: Multiple methods for switching between HDMI sources.

• Manual Switching (Front Panel): Press the "Input" button on the front panel to cycle sequentially through the connected HDMI sources (Input 1 → Input 2 → Input 3 → Input 4). The corresponding LED indicator will light up.
• IR Isakoṣo latọna jijin: Use the provided IR remote control to directly select the desired input by pressing the corresponding number button (1, 2, 3, or 4). Ensure the remote is pointed towards the IR receiver on the front panel.
• Yipada Aifọwọyi: The switch supports automatic detection. When a new input device is attached or powered on, the HDMI switch will automatically switch to this newly plugged-in source. If a connected input source is removed, the HDMI switch will switch to the first valid input source automatically. If the HDMI switch is connected to a non-signal input port, it will switch to the next valid port automatically in a few seconds.

Aṣayan Ipo Ohun

• Press the "Audio" button on the front panel or the corresponding button on the IR remote to select the desired audio output mode: 5.1 channel, 2.0 channel, or Auto. This allows you to match the audio output to your sound system's capabilities.

Awọn pato

Laasigbotitusita

• Ko si ifihan agbara tabi Ifihan didan:
  • Rii daju pe gbogbo awọn kebulu HDMI ti sopọ ni aabo.
  • Use certified high-speed 18Gbps HDMI cables, especially for 4K@60Hz content, to prevent signal loss or flickering.
  • Rí i dájú pé a yan orísun ìtẹ̀síwájú tó tọ́ lórí yíyí àti ìfihàn rẹ.
  • Try restarting the switch and connected devices.
• Audio Issues (No Sound or Incorrect Format):
  • Check that your audio system is properly connected to the S/PDIF or L/R output ports.
  • Ensure the audio mode on the switch (5.1, 2.0, Auto) matches the capabilities of your audio receiver or soundbar.
  • Confirm that the audio settings on your source device are correctly configured for the desired output.
• IR Remote Control Not Responding:
  • Ensure a CR2025 battery is correctly installed in the remote (battery not included).
  • Point the remote directly at the IR receiver on the front panel of the switch.
  • Remove any obstructions between the remote and the switch.
• Ohun elo gbigbona:
  • Ensure the switch is placed in a well-ventilated area and not covered, allowing for proper heat dissipation.

Atilẹyin ọja ati Support

The TESmart 4x1 HDMI Switch HSW0401A1U comes with a 1-year warranty from the date of order. Free technical support is available for any issues or questions you may have. For assistance, please contact TESmart support through the vendor's official channels.