Thomson Universal 2-in-1 Zapper Remote Control ROC Z107

Ọrọ Iṣaaju

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Thomson Universal 2-in-1 Zapper Remote Control ROC Z107. Please read this manual carefully before using the device to ensure optimal performance and longevity.

Ọja Pariview

The Thomson ROC Z107 is a universal remote control designed to operate two devices, typically a Television (TV) and a Set-Top Box (STB). It features large buttons for ease of use and includes a learning function for expanded compatibility.

Image: Thomson Universal 2-in-1 Zapper Remote Control ROC Z107. This image displays the remote control from a slightly angled top-down perspective, highlighting its ergonomic design and the layout of its primary buttons.

Ṣeto

1. Fifi sori batiri

1. Ṣii ideri aporo batiri lori ẹhin iṣakoso latọna jijin.
2. Insert two AAA batteries, ensuring correct polarity (+ and -). Two AAA batteries are included with your purchase.
3. Pa ideri batiri naa ni aabo.

2. Initial Programming (Pre-programmed Devices)

The remote control is pre-programmed for many popular brands such as LG, Sony, Samsung, Sharp, and Philips. For these brands, the remote may function immediately after battery installation without further setup. Test the remote with your TV and STB.

3. Learning Function (For Unlisted or Specific Functions)

If your device is not immediately compatible or if you wish to add specific functions from your original remote, use the learning function:

1. Place the Thomson remote and your original remote control head-to-head, approximately 2-5 cm apart.
2. Press and hold the desired device button (TV or STB) on the Thomson remote until the indicator light blinks.
3. Press the button on the Thomson remote that you wish to program. The indicator light will blink slowly.
4. Press the corresponding button on your original remote control. The indicator light on the Thomson remote will blink rapidly to confirm successful learning.
5. Repeat for other buttons as needed.
6. Press the device button (TV or STB) again to exit learning mode.

4. Master Volume and Program Selection

This feature allows you to designate which device (TV or STB) controls the volume and program channels, regardless of which device mode the remote is currently in. Refer to the full user manual for specific steps on setting up master control functions.

Awọn ilana Iṣiṣẹ

The Thomson ROC Z107 remote control features a simplified button layout for essential functions.

Image: Close-up of Thomson ROC Z107 remote control buttons. This image provides a detailed view of the remote's buttons, including Power, TV, STB, Program Up/Down, Volume Up/Down, Mute, and AV input selection.

• Bọtini agbara (⏻): Turns the selected device (TV or STB) on or off.
• Bọtini TV: Selects the Television control mode.
• STB Button: Selects the Set-Top Box control mode.
• Prog + / Prog - Buttons: Changes the program/channel up or down.
• Vol + / Vol - Buttons: Ṣe alekun tabi dinku iwọn didun.
• Bọtini Parẹ🔇): Mu ohun naa mu tabi mu ohun kuro.
• AV Button: Switches the input source on the TV (e.g., HDMI 1, HDMI 2, AV).

Itoju

Batiri Rirọpo

When the remote control's performance degrades or the indicator light does not respond, it is time to replace the batteries. Follow the battery installation steps outlined in the Setup section.

Ninu

To clean the remote control, use a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these can damage the remote's surface or internal components.

Laasigbotitusita

• Latọna jijin ko dahun:
  • Ṣayẹwo boya a ti fi awọn batiri sii daradara ati pe ko dinku. Rọpo ti o ba wulo.
  • Ensure there are no obstructions between the remote and the device's IR receiver.
  • Verify that the remote is in the correct device mode (TV or STB).
• Awọn iṣẹ kan pato ko ṣiṣẹ:
  • If a specific button does not work, it may not be programmed for your device or the device may not support that function. Use the learning function to program the button from your original remote.
  • Some older devices may have limited compatibility with universal remotes.
• Remote range is limited:
  • Rii daju pe awọn batiri jẹ alabapade.
  • The maximum operating range is 10 meters. Operating beyond this distance may result in unreliable performance.

Awọn pato

Atilẹyin ọja

This product is covered by a manufacturer's warranty. Please refer to the warranty card included in the product packaging or contact Thomson customer support for detailed warranty information and terms.

Atilẹyin

For further assistance, technical support, or inquiries regarding your Thomson Universal 2-in-1 Zapper Remote Control ROC Z107, please visit the official Thomson webojú òpó wẹ́ẹ̀bù tàbí kí o kàn sí ẹ̀ka iṣẹ́ oníbàárà wọn. Àwọn àlàyé ìbánisọ̀rọ̀ ni a lè rí lórí àpótí ọjà tàbí lórí ìkànnì ayélujára tí ilé-iṣẹ́ náà wà.