StarTech.com SV431DHD4KU 4-Port Dual Monitor HDMI KVM Switch User Manual

Ọrọ Iṣaaju

The StarTech.com SV431DHD4KU is a 4-port Dual Monitor HDMI KVM Switch designed to control four HDMI-enabled computers from a single console (keyboard, mouse, and two monitors). This device supports resolutions up to 4K 30Hz and includes a built-in 2-port USB 3.0 hub for sharing peripherals, as well as 3.5mm audio ports for independent audio control.

Package Awọn akoonu

• 1x SV431DHD4KU 4-Port Dual Monitor HDMI KVM Switch
• 1x Itọsọna Ibẹrẹ Yara
• 4x Roba Ẹsẹ
• 1x Universal Power Adapter (NA/JP, UK, EU, ANZ)

Ọja aworan atọka

Iwaju Panel

• HID USB Port: Connect your keyboard or mouse.
• Ibudo USB 3.0: Connect USB 3.0 peripherals.
• Computer Selection Buttons (1-4): Press to switch to the corresponding computer.
• Atọka Agbara: Illuminates when the KVM switch is powered on.

Ru Panel

• Ìtẹ̀wọlé Agbára DC 9-12V: So ohun ti nmu badọgba agbara to wa.
• Awọn ibudo Console:
• 2x USB HID Ports (Keyboard/Mouse)
• 2x USB 3.0 Awọn ibudo
• 2x 3.5mm Audio Out (Speakers)
• 2x 3.5mm Audio In (Microphone)
• PC Input Ports (PC1-PC4): Each computer requires:
• 2x HDMI Input Ports
• 1x USB 3.0 Input Port
• 1x 3.5mm Audio Out (from PC)
• 1x 3.5mm Audio In (to PC)

Eto ati fifi sori

Follow these steps to connect your KVM switch and computers:

1. Pa gbogbo awọn ẹrọ kuro: Ensure all computers, monitors, and the KVM switch are powered off and unplugged.
2. So Àwọn Ẹ̀rọ Kónsílùpọ̀ pọ̀: Connect your keyboard and mouse to the HID USB ports on the KVM's console side. Connect your two HDMI monitors to the console HDMI output ports. Connect your speakers and microphone to the 3.5mm audio ports on the console side.
3. So awọn Kọmputa: For each computer (PC1 to PC4):
   • Connect two HDMI cables from the computer's video output to the corresponding HDMI input ports on the KVM switch (e.g., PC1 HDMI 1 and PC1 HDMI 2).
   • Connect a USB 3.0 cable from the computer's USB port to the corresponding USB 3.0 input port on the KVM switch (e.g., PC1 USB 3.0).
   • Connect 3.5mm audio cables from the computer's audio output and input to the corresponding audio ports on the KVM switch (e.g., PC1 Audio Out and PC1 Audio In).
4. So agbara: Plug the universal power adapter into the DC 9-12V input on the KVM switch, then plug the adapter into a power outlet.
5. Agbara Tan: Power on the KVM switch, then power on your monitors, and finally power on your connected computers.

Isẹ

Switching Computers

You can switch between connected computers using the front panel buttons or keyboard hotkeys.

• Awọn bọtini Igbimo iwaju: Press the corresponding numbered button (1-4) on the front panel of the KVM switch to select the desired computer.
• Awọn bọtini itẹwe: Use specific key combinations on your connected keyboard to switch between computers. Refer to the Quick-Start Guide for the exact hotkey sequences.

USB 3.0 Hub Functionality

The KVM switch features a 2-port USB 3.0 hub on the console side. Any devices connected to these ports will automatically switch to the currently selected computer, allowing for shared access to peripherals like external hard drives, webcams, or printers.

Pipin ohun

The 3.5mm audio ports provide independent analog audio switching. Your speakers and microphone connected to the console will switch along with the selected computer, providing full multimedia control.

Awọn pato

Laasigbotitusita

• Ko si Ijade fidio:
  • Ensure all HDMI cables are securely connected between the computers, KVM, and monitors.
  • Verify that the KVM switch is powered on and the correct computer port is selected.
  • Check monitor input settings to ensure they are set to the correct HDMI input.
  • Try using different HDMI cables or connecting monitors directly to a computer to rule out cable or monitor issues.
• Keyboard/Asin Ko Dahun:
  • Ensure the keyboard and mouse are connected to the dedicated HID USB ports on the KVM console.
  • Verify that the USB cables from the computers to the KVM are securely connected.
  • Some advanced keyboards/mice may require connection to the USB 3.0 hub ports instead of HID ports for full functionality.
  • Restart the KVM switch and computers.
• Awọn ọrọ ohun:
  • Check all 3.5mm audio cable connections.
  • Ensure audio output/input settings on the selected computer are configured correctly.
  • Verify speaker and microphone connections and functionality.
• USB 3.0 Devices Not Detected:
  • Ensure the USB 3.0 cables from the computers to the KVM are connected.
  • Some high-power USB 3.0 devices may require an external power source.

Itoju

To ensure the longevity and optimal performance of your KVM switch:

• Jeki ẹrọ naa ni itura, agbegbe gbigbẹ, kuro lati orun taara ati awọn orisun ooru.
• Fi aṣọ gbígbẹ tó rọ̀, tó sì rọ̀ mọ́ òde. Yẹra fún lílo àwọn kẹ́míkà líle tàbí àwọn ohun ìfọṣọ tó ń pa ara.
• Rii daju pe fentilesonu to dara ni ayika ẹyọ naa lati ṣe idiwọ igbona.

Atilẹyin ọja ati Support

This StarTech.com SV431DHD4KU KVM Switch is backed by a 2-odun atilẹyin ọja.

For technical support, product information, or to access drivers and manuals, please visit the official StarTech.com webaaye tabi kan si atilẹyin alabara wọn taara.

Ọja Pariview Fidio

Wo fidio yii fun wiwo loriview of the StarTech.com 4-Port Dual Monitor HDMI KVM Switch, highlighting its features and benefits.