Ìwé Ìtọ́ni fún Fífọ Àwọn Ẹ̀yà Ara Tí A Lè Gbé Síta ARES 70922

1. Ifihan

This manual provides instructions for the safe and effective use of the ARES 70922 Portable Parts Washer. This device is designed for degreasing small parts and tools using a standard 5-gallon bucket (not included).

Aworan 1.1: Pariview of the ARES 70922 Portable Parts Washer components.

2. Alaye Aabo

WARNING: Read all safety instructions before operating this product.

• Use only with non-corrosive, non-solvent, water-based cleaning solutions. Using flammable or corrosive solvents can cause fire, explosion, or damage to the unit.
• Rí i dájú pé okùn agbára àti plug náà wà ní ipò tó dára kí o tó lò ó lẹ́ẹ̀kan. Má ṣe ṣiṣẹ́ pẹ̀lú okùn tàbí plug tí ó ti bàjẹ́.
• Jeki awọn ọwọ ati awọn aṣọ alaimuṣinṣin kuro lati awọn ẹya gbigbe lakoko iṣẹ.
• Always unplug the unit from the power source before performing any maintenance, cleaning, or when not in use.
• Do not submerge the entire unit (excluding the pump) in liquid. The pump is designed for submersion, but other electrical components are not.
• Operate the parts washer in a well-ventilated area.
• Jeki kuro ni arọwọto awọn ọmọde.

3. Package Awọn akoonu

Jẹrisi pe gbogbo awọn ohun kan wa ninu package:

• 1x Parts Washer Basin
• 1x Submersible Pump with Power Cord
• 1x Hard Bristle Cleaning Brush with Hose

A standard 5-gallon bucket is required for operation and is not included.

4. Awọn ilana iṣeto

1. Múra Bọ́ọ̀kì náà: Obtain a clean, standard 5-gallon bucket.
2. Gbe fifa soke: Place the submersible pump at the bottom of the 5-gallon bucket. The pump is equipped with suction cups to help secure it to the bucket's base.
3. So okun pọ: Attach the hose from the cleaning brush to the outlet of the submersible pump. Ensure the connection is secure.
4. Place the Basin: Position the parts washer basin on top of the 5-gallon bucket. The basin is designed to fit securely over the bucket's rim.
5. Ṣafikun Solusan Itọpa: Pour your chosen non-corrosive, non-solvent, water-based cleaning solution into the basin. Ensure the liquid level is sufficient to cover the pump when it is placed in the bucket, but do not overfill the basin.

Image 4.1: Setup diagram illustrating the parts washer assembly on a 5-gallon bucket.

5. Isẹ

1. Agbara Tan: Plug the pump's power cord into a suitable electrical outlet. The pump will begin to circulate the cleaning solution through the brush.
2. Àwọn Ẹ̀yà Mímọ́: Place the parts to be cleaned into the basin. Use the hard bristle brush, which delivers a continuous flow of cleaning solution, to scrub and degrease the parts.
3. Sisan omi: Awọn basin features a channel drainage system designed to catch waste material and return the cleaning solution to the bucket, allowing larger debris to settle at the bottom of the basin.
4. Agbara Pa: Once cleaning is complete, unplug the pump from the electrical outlet.

Image 5.1: Demonstrating the use of the parts washer to clean a component.

Image 5.2: Metal parts placed in the parts washer basin fun ninu.

6. Itọju

Regular maintenance ensures the longevity and optimal performance of your parts washer.

• Fífọ B mọ́asin: After each use, or as needed, remove the basin from the bucket and clean any accumulated debris. Rinse thoroughly with water.
• Cleaning Solution Replacement: Replace the cleaning solution regularly, especially when it becomes heavily soiled or its effectiveness diminishes. Dispose of used cleaning solution according to local environmental regulations.
• Ayewo fifa fifa: Periodically inspect the submersible pump for any blockages or debris that may affect its operation. Unplug the pump before inspection.
• Fẹlẹfọ: Clean the bristles of the brush after use to prevent buildup and maintain cleaning effectiveness.
• Ibi ipamọ: When not in use, clean and dry all components. Store the parts washer in a clean, dry place.

7. Laasigbotitusita

8. Awọn pato

• Awoṣe: ARA 70922
• Awọn iwọn (L x W x H): 13.75 x 13.75 x 5.12 inches
• Ìwúwo: 3.85 iwon
• Oṣuwọn Sisan fifa: 1 galonu fun iseju kan (GPM)
• Bucket Compatibility: Standard 5-Gallon Buckets (not included)
• Niyanju Solusan Cleaning: Non-corrosive, non-solvent, water-based solutions
• UPC: 818765028326

Image 8.1: Submersible pump and cleaning brush assembly.

Image 8.2: Detail of the hard bristle cleaning brush.

9. Atilẹyin ọja ati Support

ARES products are backed by a Performance Assurance. If you encounter any issues with your ARES Portable Parts Washer, please contact customer service for assistance with troubleshooting, parts, replacement, or refund.

For customer support, please refer to the contact information provided with your purchase or visit the official ARES webojula.