Feit Electric BR40 Dimmable LED Floodlight User Manual

Ọrọ Iṣaaju

Thank you for choosing the Feit Electric BR40 Dimmable LED Floodlight. This energy-efficient LED bulb is designed to replace traditional 75-watt incandescent floodlights, consuming only 11.8 watts while providing 1065 lumens of soft white 2700K light. It is suitable for various indoor applications, including track lighting and recessed fixtures, offering a wide 110-degree beam spread. With a lifespan of up to 15,000 hours, this ENERGY STAR qualified bulb is built for long-lasting performance and significant energy savings.

Aworan: Iwaju view of the Feit Electric BR40 Dimmable LED Floodlight 2-pack packaging, highlighting its LED, dimmable, flood, 1065 lumens, 11.8 watts, 15,000 life hours, and 75W replacement features.

Alaye Aabo

IKILO:

• Ẹrọ yii ni ibamu pẹlu Apá 15 ti Awọn ofin FCC. Isẹ jẹ koko ọrọ si awọn ipo meji wọnyi: (1) Ẹrọ yii le ma fa kikọlu ipalara, ati (2) ẹrọ yii gbọdọ gba kikọlu eyikeyi ti o gba, pẹlu kikọlu ti o le fa iṣẹ ti ko fẹ.
• This equipment has been tested and found to comply with the limits for a Class B digital device. It generates, uses, and can radiate radio frequency energy. If not installed and used according to instructions, it may cause harmful interference to radio communications.
• Àwọn àyípadà tàbí àtúnṣe tí olùpèsè kò fọwọ́ sí ní pàtó lè sọ agbára olùlò láti ṣiṣẹ́ ohun èlò náà di òfo.

IKIRA:

• Use only on 120 volt, 60Hz circuits.
• Dara fun damp awọn ipo.
• Minimum operating temperature: -25°C (-13°F).
• Ẹrọ yii ko ṣe ipinnu fun lilo pẹlu awọn imuduro ijade pajawiri tabi awọn ina pajawiri.
• Lamp may not be compatible with all dimmers. For dimmer compatibility information, visit www.feit.com or call 1-866-329-BULB.
• When installing or replacing, ensure that power is switched off at the circuit breaker before connecting or disconnecting to the fixture.

Aworan: Pada view of the Feit Electric BR40 Dimmable LED Floodlight packaging, showing detailed specifications, warranty information, and safety warnings.

Eto ati fifi sori

1. Agbara Pa: Before beginning installation, ensure the power to the light fixture is switched off at the circuit breaker to prevent electrical shock.
2. Yọ Bulb atijọ kuro: Carefully unscrew and remove the existing bulb from the fixture. Allow the old bulb to cool if it has been recently in use.
3. Fi Gílóòbù LED Tuntun sori ẹrọ: Screw the Feit Electric BR40 Dimmable LED Floodlight into the standard E26 medium screw base socket until it is finger-tight. Do not overtighten.
4. Pada Agbara pada: Once the bulb is securely installed, restore power at the circuit breaker.
5. Ohun elo: This BR40 floodlight is designed for track lighting and recessed applications, providing a wide beam of light.

Aworan: Apa view of the Feit Electric BR40 Dimmable LED Floodlight packaging, illustrating its wide light distribution and suitability for track and recessed applications.

Awọn ilana Iṣiṣẹ

The Feit Electric BR40 LED Floodlight is designed for simple operation in compatible fixtures.

• Iṣe Didara: Once installed and power is restored, the bulb will illuminate when the light switch is turned on.
• Iṣẹ ṣiṣe Dimmable: This LED bulb is dimmable. For optimal performance and to avoid flickering or buzzing, use with LED-compatible dimmer switches. If you experience issues with your current dimmer, consult www.feit.com for a list of compatible dimmers or contact customer support.
• Lilo inu ile: This bulb is intended for indoor use in dry or damp awọn ipo.

Itoju

Feit Electric LED bulbs require minimal maintenance due to their long lifespan and durable design.

• Ninu: Rii daju pe agbara wa ni pipa ṣaaju ṣiṣe mimọ. Mu ese boolubu naa pẹlu asọ ti o gbẹ. Ma ṣe lo awọn olutọpa omi tabi awọn ohun elo abrasive.
• Rọpo: Replace the bulb only after it has cooled down completely.
• Idasonu: Sọ awọn gilobu LED sọnu ni ibamu si awọn ilana agbegbe fun egbin itanna.

Laasigbotitusita

If you encounter issues with your Feit Electric BR40 LED Floodlight, consider the following:

• Bọbulubu Ko Titan:
  1. Rí i dájú pé a ti fi boolubu náà sínú ihò náà dáadáa.
  2. Check if the power switch is on and the circuit breaker has not tripped.
  3. Test the bulb in a different, known-working fixture.
• Gbigbọn tabi ariwo:
  1. This often indicates incompatibility with the dimmer switch. Ensure you are using an LED-compatible dimmer.
  2. Ṣabẹwo www.feit.com for a list of recommended dimmers or contact customer support.
• Radio or TV Interference:
  1. If the bulb causes interference, try reorienting or relocating the receiving antenna.
  2. Increase the separation between the light fixture and the affected receiver.
  3. Connect the light fixture to an outlet on a different circuit from the receiver.
  4. Consult a dealer or an experienced radio/TV technician for further assistance.

Awọn pato

Atilẹyin ọja ati Support

Atilẹyin ọja: This Feit Electric LED lamp comes with a 5-year, free replacement warranty. If the product fails or you are not satisfied with its performance, please contact Feit Electric directly. This replacement is the sole remedy available, and liability for incidental or consequential damage is expressly excluded.

Ibi iwifunni:

• Webojula: www.feit.com
• Imeeli: info@feit.com
• Nọmba Ọfẹ: 1-866-329-BULB (1-866-329-2852)

Olupese:
Feit Ile-iṣẹ Ina
Pico Rivera, CA 90660
Ṣe lati orilẹ-ede Ṣaina