eMylo Smart WiFi Switch Universal Light Switch Module

1. Ifihan

The eMylo Smart WiFi Switch is an intelligent wireless relay module designed to integrate your lighting and other electrical devices into a smart home system. This device allows for remote control, voice commands, and scheduled operations, enhancing convenience and energy efficiency. This manual provides essential information for the safe and effective use of your eMylo Smart WiFi Switch.

2. Key Awọn ẹya ara ẹrọ

• Smart WiFi Control: Control connected devices remotely via the Smart Life or Tuya app on your smartphone.
• Ibamu Iṣakoso ohun: Ṣiṣẹ laisi wahala pẹlu Amazon Alexa ati Google Home fun iṣẹ ṣiṣe laisi ọwọ.
• Timer & Countdown Functions: Set schedules, countdowns, and loop timers to automate your devices.
• Fifi sori Rọrun: Features secure, insulated clamps for quick and tool-free wiring.
• Jakejado Voltage Wọle: Supports AC90-250V, suitable for various lamps, ceiling fans, and other appliances up to 10 Amperes.

3. Package Awọn akoonu

Jọwọ ṣayẹwo package fun awọn nkan wọnyi:

• eMylo Smart WiFi Switch Module (Model YSR111A6N-FBM)
• Quick Wiring Connectors (Wago-style)
• Itọsọna olumulo

Image: eMylo Smart WiFi Switch packaging and included components.

4. Awọn pato

5. Alaye Aabo

Jọwọ ka ati loye gbogbo awọn ilana aabo ṣaaju fifi sori ẹrọ ati lilo. Ikuna lati tẹle awọn ilana wọnyi le ja si mọnamọna, ina, tabi awọn eewu miiran.

• Always turn off the main power supply at the circuit breaker before performing any electrical work.
• Ensure that the device is installed by a qualified electrician or a person with sufficient knowledge of electrical wiring.
• Má ṣe kọjá ìwọ̀n ẹrù tó pọ̀jù tí ó jẹ́ 10 Amperes or 2200 Watts.
• This device is designed for indoor use in dry locations unless otherwise specified by its IP rating.
• Jeki ẹrọ naa kuro ni omi, ọrinrin, ati awọn iwọn otutu giga.
• Ma ṣe gbiyanju lati tunto tabi yi ẹrọ naa pada.

6. fifi sori

Follow these steps to physically install your eMylo Smart WiFi Switch:

1. Pa Agbara: Before starting, ensure the main power supply to the circuit you are working on is turned off at the circuit breaker to prevent electric shock.
2. Ṣe idanimọ Awọn okun: Locate the live (L) and neutral (N) wires for both the input (power source) and output (to the light/appliance). The eMylo switch has clearly labeled input and output terminals.
3. Connect Input Wires: Use the provided quick wiring connectors to connect the live (L) and neutral (N) wires from your power source to the 'Input' side of the eMylo switch. Ensure a secure connection by lifting the orange levers, inserting the stripped wire ends, and pushing the levers back down.
4. Connect Output Wires: Similarly, connect the live (L) and neutral (N) wires leading to your light fixture or appliance to the 'Output' side of the eMylo switch using the quick wiring connectors.
5. Ṣe aabo Module naa: Place the eMylo switch in a suitable, safe location, such as inside a junction box or light fixture canopy, ensuring it is not exposed to moisture or physical damage. The compact design allows for flexible placement.
6. Pada Agbara pada: Nígbà tí gbogbo ìsopọ̀ bá wà ní ààbò tí a sì ti fi module náà sí ibi ààbò, dá agbára padà sí ibi ìfọ́wọ́sí ẹ̀rọ náà.

Image: The eMylo Smart WiFi Switch connected with quick wiring connectors, demonstrating the input and output connections.

Image: Illustration of the easy installation process using the quick wiring connectors, highlighting the simplicity of connecting wires without tools.

7. App Setup & Device Pairing

To control your eMylo Smart WiFi Switch, you need to pair it with the Smart Life or Tuya app:

1. Ṣe igbasilẹ ohun elo naa: Download and install the 'Smart Life' or 'Tuya Smart' app from the App Store (iOS) or Google Play Store (Android).
2. Forukọsilẹ/Wọle: Ṣii app naa ki o forukọsilẹ fun akọọlẹ tuntun tabi wọle ti o ba ti ni ọkan tẹlẹ.
3. Fi ẹrọ kun: Tap the '+' icon in the top right corner of the app to add a new device. Select 'Electrical' > 'Switch (Wi-Fi)' or use the 'Auto Scan' feature.
4. Ẹrọ atunto: Power on the eMylo switch. If the indicator light is not blinking rapidly, press and hold the small button on the switch for approximately 5 seconds until the indicator light starts blinking rapidly. This puts the device into pairing mode.
5. Sopọ si Wi-Fi: In the app, confirm the indicator is blinking rapidly. Select your 2.4GHz Wi-Fi network and enter the password. The device only supports 2.4GHz Wi-Fi.
6. Ilana Sisopọ: The app will begin searching for and adding the device. This may take a few moments.
7. Fikun ẹrọ: Once successfully added, you can rename the device and start controlling it through the app.

8. Isẹ

8.1. App Isakoṣo latọna jijin

After successful pairing, you can control your device from anywhere with an internet connection:

• Open the Smart Life or Tuya app.
• Select your eMylo Smart WiFi Switch from the device list.
• Tap the power icon to turn the connected light or appliance ON or OFF.

Image: Screenshot of the mobile app interface showing the remote control function to turn the switch on or off.

8.2. Iṣakoso ohun

Integrate your eMylo switch with Amazon Alexa or Google Home for voice commands:

• Ensure your Alexa or Google Home device is set up and connected to the same Wi-Fi network.
• Enable the 'Smart Life' or 'Tuya Smart' skill/action in your Alexa or Google Home app.
• Discover devices. Your eMylo switch will appear.
• Use voice commands such as: "Alexa, turn on the living room light" or "Hey Google, turn off the bedroom lamp."

Image: A smart speaker and a lamp, illustrating voice control functionality with commands like "Alexa, turn off the lamp for me."

8.3. Timer and Countdown Functions

Automate your devices with scheduled operations:

• In the app, select your eMylo switch.
• Navigate to the 'Timer' or 'Countdown' section.
• Set specific times for the device to turn ON or OFF daily, weekly, or on custom schedules.
• Lo iṣẹ́ kíkà ìsàlẹ̀ láti pa ẹ̀rọ kan láìfọwọ́sí lẹ́yìn àkókò tí a yàn.

Image: A person sleeping with a lamp, illustrating the timer function set to turn on at 07:00 and off at 22:00.

9. Laasigbotitusita

If you encounter issues with your eMylo Smart WiFi Switch, refer to the following common problems and solutions:

• Ohun elo Ko Sopọ:
  • Rí i dájú pé nẹ́tíwọ́ọ̀kì Wi-Fi rẹ jẹ́ 2.4GHz. Ẹ̀rọ náà kò ṣe àtìlẹ́yìn fún Wi-Fi 5GHz.
  • Confirm the indicator light on the switch is blinking rapidly, indicating pairing mode. If not, press and hold the button for 5 seconds to reset.
  • Check your Wi-Fi signal strength. Move the device closer to your router if necessary.
  • Jẹrisi ọrọ igbaniwọle Wi-Fi ti a tẹ sinu app naa tọ.
• Device Not Responding to App/Voice Commands:
  • Ṣayẹwo asopọ intanẹẹti rẹ.
  • Ensure the eMylo switch is powered on and its indicator light is solid (not blinking).
  • Restart the eMylo switch by turning off and on the power supply.
  • Verify that the Smart Life/Tuya app is updated to the latest version.
  • For voice control, ensure the Smart Life/Tuya skill/action is enabled in your Alexa/Google Home app and devices are discovered.
• Device Does Not Turn On After Power Outage (if controlled by a physical wall switch):
  • The eMylo switch requires continuous power to maintain its Wi-Fi connection and smart functionality. If a physical wall switch is used to cut power to the eMylo module, it will lose its smart capabilities until power is restored.
  • For optimal smart home integration, it is recommended to keep the eMylo switch constantly powered and use the app or voice commands for control, or ensure the physical switch is always in the 'ON' position.
• Igbóná púpọ̀:
  • Ensure the connected load does not exceed the maximum rating of 10 Amperes or 2200 Watts.
  • Provide adequate ventilation around the module.

10. Atilẹyin ọja & Atilẹyin

For warranty information, technical support, or any questions regarding your eMylo Smart WiFi Switch, please contact Yasorn customer service through the retailer where you purchased the product. You may also refer to the official eMylo webojula fun afikun oro ati FAQs.