iGPSPORT iGS50E GPS Bike Computer User Manual

1. Ifihan

The iGPSPORT iGS50E is a high-performance GPS bike computer designed to provide cyclists with comprehensive real-time data and navigation capabilities. Featuring a highly sensitive GPS receiver, ANT+ connectivity for external sensors, and a large, anti-glare display, the iGS50E offers a reliable and user-friendly experience for tracking your rides. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your device.

Figure 1.1: The iGPSPORT iGS50E GPS Bike Computer with its display showing various ride metrics.

2. Eto

2.1. Package Awọn akoonu

Ṣaaju ki o to bẹrẹ, rii daju pe gbogbo awọn paati wa ninu package:

• iGPSPORT iGS50E Bike Computer (x1)
• Okun USB Micro-USB (x1)
• Standard Bike Mount (x1)
• Itọsọna olumulo (x1)

Figure 2.1: The iGS50E bike computer and its retail packaging.

2.2. Ngba agbara ẹrọ

The iGS50E is equipped with a 1200 mAh Lithium-polymer battery, providing up to 40 hours of endurance. Before first use, fully charge the device using the provided Micro-USB cable. Connect the cable to the charging port on the device and a standard USB power adapter (not included) or a computer USB port.

2.3. Mounting the Bike Computer

Use the standard bike mount to securely attach the iGS50E to your bicycle's handlebars or stem.

1. Position the mount on your handlebar or stem in a location that provides clear visibility and easy access to the buttons.
2. Secure the mount using the provided rubber bands or zip ties.
3. Align the iGS50E with the mount, place it onto the mount, and rotate it clockwise until it clicks securely into place.

Figure 2.2: The iGS50E bike computer mounted on a bicycle handlebar, viewed lati oke.

Figure 2.3: The iGS50E bike computer mounted on a bicycle handlebar, viewed lati ẹgbẹ.

2.4. Initial Power On and GPS Acquisition

Press and hold the power button to turn on the device. For accurate positioning, ensure the device has a clear view of the sky to acquire GPS satellites quickly. The highly sensitive GPS will track your distance, speed, and location.

2.5. Pairing ANT+ Sensors

The iGS50E supports ANT+ sensors from all brands, including heart rate monitors, speed sensors, and cadence sensors. To pair a sensor:

1. Ensure your ANT+ sensor is active and within range of the iGS50E.
2. Navigate to the sensor pairing menu on the iGS50E (refer to the 'Operating' section for menu navigation).
3. Select the type of sensor you wish to pair (e.g., Heart Rate, Speed, Cadence).
4. Ẹ̀rọ náà yóò wá àwọn sensọ̀ tó wà. Yan sensọ̀ rẹ láti inú àkójọ náà láti parí ìsopọ̀.

2.6. Connecting to the iGPSPORT App

The iGS50E can connect to the iGPSPORT app via Bluetooth 4.0 for data synchronization and settings management. The app is available for both Android and iPhone devices.

• Fun Android: Wa fun "iGPSPORT" in the Google Play Store.
• Fun iPhone: Wa fun "iGPSPORT" in the App Store.

After installing the app, enable Bluetooth on your smartphone and follow the in-app instructions to pair your iGS50E. Note that Bluetooth 4.0 connectivity is for app connection only and does not support Bluetooth heart rate monitors or other tools.

3. Ṣiṣẹ ẹrọ naa

3.1. Awọn iṣakoso ipilẹ

The iGS50E features button-based user input. Refer to the device layout for specific button functions:

• Bọtini agbara: Press and hold to power on/off. Short press for backlight or to confirm selections.
• Bọtini osi: Navigate left or scroll up in menus.
• Bọtini Ọtun: Navigate right or scroll down in menus.
• Bọtini Aarin: Start/stop recording, enter menu.

3.2. Real-time Display Data

The 2.2-inch high-brightness, high-contrast, anti-glare LCD display shows up to 13 real-time data points:

• Iyara (SPD)
• Average Speed (AV SPD)
• Maximum Speed (MX-SPD)
• Ride Time (TRIP TIME)
• Daily Distance (DST)
• Lapapọ Ijinna (ODO)
• Altitude (ALT)
• Gradient (TEM)
• Temperature (TEM)
• Akoko
• Ọjọ
• Agbara Kalori
• Lap Data

When ANT+ sensors are connected, the display can also show 6 additional data points:

• Current Cadence
• Maximum Cadence
• Oṣuwọn Ọkàn lọwọlọwọ
• Aropin Okan Rate
• O pọju Okan Rate
• Maximum Heart Rate (repeated, likely a typo in source, assuming 5 distinct data points)

3.3. Recording Rides

To start recording a ride, ensure GPS signal is acquired and press the Middle button. The device will begin recording your ride data. Press the Middle button again to pause or stop the recording. The device has approximately 200 hours of ride data memory.

3.4. Data Upload and STRAVA Compatibility

After your ride, you can upload your data to the iGPSPORT app via Bluetooth. The iGS50E supports file uploads, making it compatible with platforms like STRAVA. Connect the device to the app, and follow the app's instructions to sync and upload your ride data.

3.5. Ẹrọ Eto

Access the device settings menu to configure various parameters such as time, date, units (metric/imperial), and sensor management. Refer to the on-screen prompts and use the navigation buttons to adjust settings.

4. Itọju

4.1. Ninu

To clean your iGS50E, wipe it with a soft, damp cloth. Avoid using abrasive cleaners or solvents, as these can damage the device's casing tabi ifihan.

4.2. Omi Resistance

The iGS50E has an IPX7 waterproof rating, meaning it can withstand immersion in water up to 1 meter for 30 minutes. While it is resistant to rain and splashes, avoid prolonged submersion or high-pressure water jets.

4.3. Itọju batiri

To maximize battery life, avoid exposing the device to extreme temperatures. Charge the device regularly, but avoid leaving it fully discharged for extended periods. If storing the device for a long time, charge it to about 50% before storage.

5. Laasigbotitusita

5.1. Awọn iṣoro ifihan agbara GPS

• Rii daju pe o wa ni agbegbe ti o ṣii pẹlu mimọ view ti ọrun.
• Wait a few minutes for the device to acquire satellites.
• Restart the device if GPS acquisition is taking too long.

5.2. Sensor Connection Problems

• Check if the ANT+ sensor's battery is charged and correctly installed.
• Ensure the sensor is active and within close proximity to the iGS50E.
• Try re-pairing the sensor through the device's settings menu.

5.3. Àwọn Ìṣòro Ìsopọ̀mọ́ra Àpù

• Ensure Bluetooth is enabled on your smartphone and the iGS50E.
• Make sure the iGPSPORT app is updated to the latest version.
• Try restarting both your smartphone and the iGS50E.
• Unpair and re-pair the device within the app's settings.

5.4. Ifihan Awọn oran

• Adjust the backlight settings for better visibility in different lighting conditions.
• Ensure the screen is clean and free from dirt or smudges.

6. Awọn pato

7. Atilẹyin ọja ati Support

The iGPSPORT iGS50E comes with a 2-odun atilẹyin ọja, ensuring coverage against manufacturing defects. iGPSPORT also provides igbesi aye support fun ọja yi.

For technical assistance, warranty claims, or any other inquiries, please contact iGPSPORT customer support through their official website or the iGPSPORT app.