Maxcio WF-CS01 Smart Wi-Fi Roller Shutter Switch User Manual

1. Ifihan

The Maxcio WF-CS01 Smart Wi-Fi Roller Shutter Switch allows you to control your roller blinds, curtains, or electric gates remotely via a smartphone application, voice commands, or directly through its touch panel. This device integrates seamlessly with smart home ecosystems like Amazon Alexa and Google Home, offering enhanced convenience and automation for your home or office. It requires a neutral wire for proper installation and operation.

Figure 1: Maxcio WF-CS01 Smart Wi-Fi Roller Shutter Switch installed on a wall.

2. Alaye Aabo

• Fifi sori ẹrọ itanna: Installation must be performed by a qualified electrician or a person with electrical knowledge. Always turn off the main power supply at the circuit breaker before beginning any electrical work.
• Ti beere fun Waya Ailopin: This device requires a neutral wire for operation. Ensure your electrical box has a neutral wire available before installation.
• Voltage: Ṣiṣẹ laarin iwọn didun ti a sọ nikantagibi tí a lè lo e (240 Volts).
• Agbara fifuye: Do not exceed the maximum load capacity of 600 Watts (10 Amps).
• Ayika: Maṣe fi sori ẹrọ ni damp environments or near flammable materials.
• Awọn ọmọde: Jeki kuro ni arọwọto awọn ọmọde.

3. Package Awọn akoonu

Jẹrisi pe gbogbo awọn paati wa ninu package:

• Maxcio WF-CS01 Smart Wi-Fi Roller Shutter Switch
• Iṣagbesori skru
• Itọsọna olumulo

4. Aworan atọka ọja

The Maxcio WF-CS01 switch features a sleek glass touch panel with three distinct buttons for control. The internal components are designed for standard wall box installation.

Nọmba 2: Iwaju ati ẹgbẹ view of the Maxcio WF-CS01 switch with dimensions and basic wiring labels.

• Bọtini itọka oke: Used to open or raise the roller shutter.
• Bọtini Duro/Iduro: Used to stop the roller shutter at any desired position.
• Bọtini itọka isalẹ: Used to close or lower the roller shutter.
• Atọka LED: Indicates Wi-Fi status and switch activity.

5. Awọn pato

6. Eto

6.1. Fifi sori ẹrọ onirin

IKILO: Ensure the main power supply is turned OFF at the circuit breaker before proceeding with installation to prevent electric shock.

1. Pa Agbara: Locate the circuit breaker controlling the power to the switch location and turn it off. Verify power is off using a voltage idanwo.
2. Yọ Yipada atijọ kuro: Carefully remove the existing roller shutter switch from the wall box. Disconnect its wires, noting their connections if possible.
3. So awọn onirin: Connect the wires to the Maxcio WF-CS01 switch according to the diagram below. This switch requires a neutral wire (N), live wire (L), and motor wires (Up, Down, Common).
• L: Live Wire (usually brown or red)
• N: Neutral Wire (usually blue or black)
• L1 (Up): Motor Up Wire
• L2 (Down): Motor Down Wire
• COM: Common Motor Wire
4. Gbe Iyipada naa: Gently push the connected wires into the wall box. Secure the Maxcio switch into the wall box using the provided screws.
5. So Apoti Iwari: Fi gilasi oju si modulu iyipada naa.
6. Pada Agbara pada: Turn the main power supply back on at the circuit breaker. The switch's LED indicator should light up.

Figure 3: Visual guide for wiring and physical installation of the switch.

6.2. Fifi sori App ati So pọ ẹrọ

To control your Maxcio WF-CS01 switch via smartphone, download the Maxcio app.

1. Ṣe igbasilẹ Ohun elo: Wa fun "Maxcio" in the Google Play Store or Apple App Store, or scan the QR code provided in the product packaging. Install the app.
2. Forukọsilẹ/Wọle: Open the Maxcio app and register a new account or log in with an existing one.
3. Fi ẹrọ kun: In the app, tap "Add Device" or the "+" icon. Select "Curtain Switch" or the appropriate device type.
4. Tẹ awọn alaye Wi-Fi sii: Ensure your phone is connected to a 2.4 GHz Wi-Fi network. Enter your Wi-Fi network password in the app. (5 GHz Wi-Fi is not supported).
5. Ipo sisopọ: On the switch, press and hold the "Stop" button for approximately 5-7 seconds until the Wi-Fi indicator light on the switch starts blinking rapidly. This indicates pairing mode.
6. Sopọ: Confirm the indicator light is blinking rapidly in the app. The app will then search for and connect to the switch. Once connected, you can rename the device.

7. Awọn ilana Iṣiṣẹ

7.1. Iṣakoso Afowoyi

You can operate the roller shutter directly using the touch buttons on the switch:

• Fọwọ ba Ọfà oke button to open/raise the shutter.
• Fọwọ ba Ọfà isalẹ button to close/lower the shutter.
• Fọwọ ba Duro button to pause the shutter at its current position.

7.2. App Iṣakoso

Once paired, use the Maxcio app to control your roller shutter from anywhere with an internet connection.

Figure 4: Maxcio app interface for controlling multiple devices.

• Open the Maxcio app and select your roller shutter switch.
• You will see virtual buttons for Up, Down, and Stop, mirroring the physical switch.
• Tap the corresponding button to control the shutter.
• The app may also offer percentage control to set the shutter to a specific open/closed level.
• Iṣakoso ina Back: The app allows you to control the backlight of the switch, which can be useful in bedrooms or dark environments.

Figure 5: App interface demonstrating backlight control for the switch.

7.3. Iṣakoso Ohun (Alexa & Ile Google)

Integrate your Maxcio switch with Amazon Alexa or Google Home for convenient voice control.

Figure 6: Illustration of voice control functionality with smart assistants.

1. Mu Agbara/Igbese ṣiṣẹ: In your Alexa or Google Home app, search for and enable the "Maxcio" skill/action.
2. Akọọlẹ Ọna asopọ: Link your Maxcio account to your Alexa/Google Home account.
3. Ṣawari Awọn ẹrọ: Ask Alexa or Google Home to discover new devices, or manually initiate device discovery in their respective apps.
4. Awọn pipaṣẹ ohun: Once discovered, you can use commands such as:
   • "Alexa, open [Device Name]"
   • "Hey Google, close [Device Name]"
   • "Alexa, stop [Device Name]"

7.4. Iṣẹ Aago

Set schedules for your roller shutters to open or close automatically at specific times using the Maxcio app.

Olusin 7: Example of setting daily schedules for roller shutters.

1. In the Maxcio app, select your roller shutter switch.
2. Navigate to the "Timer" or "Schedule" section.
3. Tap to add a new schedule. Set the desired time, action (open/close/stop), and repetition (e.g., daily, weekdays).
4. Save the schedule. The switch will now operate automatically according to your settings.

8. Itọju

• Ninu: Wipe the glass panel with a soft, dry cloth. Avoid using abrasive cleaners or solvents that may damage the surface.
• Yiyipo Agbara: Tí switch náà kò bá dáhùn, gbìyànjú láti pa agbára náà níbi ẹ̀rọ ìfọ́wọ́sí fún ìṣẹ́jú díẹ̀, lẹ́yìn náà, kí o tún un ṣe.
• Awọn imudojuiwọn famuwia: Check the Maxcio app periodically for any available firmware updates for your device to ensure optimal performance and security.

9. Laasigbotitusita

10. Atilẹyin ọja ati Support

Maxcio products are designed and manufactured to the highest quality standards. For detailed warranty information, please refer to the warranty card included with your product or visit the official Maxcio website. If you encounter any issues or require technical assistance, please contact Maxcio customer support through the contact information provided on their website or within the Maxcio app.