Ìwé Àgbékalẹ̀ Olùlò Batiri Mophie Plus 6,000mAh

1. Ifihan ati Loriview

The mophie powerstation Plus 6,000mAh is a compact portable battery designed to charge Apple and other USB-compatible devices on the go. It features an integrated cable with a switch-tip that supports both Lightning and Micro USB input ports, eliminating the need to carry multiple cables. Additionally, a 2.1A high-output USB-A port provides up to 10W of power for charging a second device.

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your powerstation Plus.

2. Package Awọn akoonu

Daju pe gbogbo awọn nkan wa ninu apo rẹ:

• 1 x mophie powerstation Plus (6,000mAh)
• 1 x Micro USB cable (for recharging the powerstation)
• 1 x Itọsọna Ibẹrẹ kiakia

3. Awọn ẹya Ọja

• Integrated Switch-Tip Cable: The built-in cable features a switch-tip that is compatible with both Lightning and Micro USB input ports. This allows for charging a wide range of devices without needing additional cables. When not in use, the switch-tip is securely stored in the cable recess.
• Igbesi aye batiri ti o gbooro sii: Provides approximately 20 hours of extra battery for smartphones, 8 hours for small tablets, and 5 hours for large tablets.
• High Output Charging: The integrated cable delivers 10W of power at 2.1A speed for efficient charging.
• Gba agbara Awọn ẹrọ lọpọlọpọ: An additional high-output USB-A port allows for charging a second compatible USB device or wearable simultaneously, delivering up to 10W of power.
• Priority Charging: When the powerstation Plus is connected to a power source and also charging a device, it will prioritize delivering power to the connected device first before recharging its internal battery.

4. Eto

4.1 Initial Charging of the Powerstation

Before first use, fully charge your mophie powerstation Plus. Use the included Micro USB cable to connect the powerstation's Micro USB input port to a USB wall adapter (not included) or a computer's USB port. The LED indicator lights on the side of the powerstation will illuminate to show the charging status. All four LEDs will be solid when fully charged.

4.2 Ṣiṣayẹwo Ipele Batiri

Press the small button on the side of the powerstation to check its current battery level. The LED indicators will light up, with each solid LED representing approximately 25% charge.

5. Awọn ilana Iṣiṣẹ

5.1 Charging Devices with the Integrated Cable

The powerstation Plus features an integrated cable with a versatile switch-tip. To charge your device:

1. Gently pull out the integrated cable from its storage slot.
2. Identify the correct connector for your device:
• For Apple devices (iPhone, iPad, iPod) with a Lightning port, use the Lightning connector.
• For Android or other devices with a Micro USB port, use the Micro USB connector. The switch-tip allows you to flip between these two connectors.
3. Plug the appropriate connector into your device's charging port. The device should begin charging automatically.

5.2 Charging a Second Device via USB-A Port

Lati gba agbara si ẹrọ afikun:

1. Connect your device's standard USB charging cable (not included) to the USB-A output port on the powerstation.
2. Pulọọgi awọn miiran opin ti awọn USB sinu ẹrọ rẹ.

The powerstation Plus supports simultaneous charging of two devices.

6. Itọju

To ensure optimal performance and longevity of your mophie powerstation Plus:

• Keep the powerstation dry and away from moisture.
• Yago fun awọn iwọn otutu to gaju.
• Clean the exterior with a soft, lint-free cloth. Do not use harsh chemicals or abrasive materials.
• Tọju ni itura, ibi gbigbẹ nigbati ko si ni lilo.

7. Laasigbotitusita

7.1 Powerstation Not Charging

• Ensure the Micro USB cable is securely connected to both the powerstation's input port and the power source (USB wall adapter or computer).
• Verify that the power source is active and providing power.
• Try using a different Micro USB cable or power adapter.

7.2 Device Not Charging from Powerstation

• Check if the powerstation has sufficient charge (press the button to check LED indicators).
• Ensure the integrated cable's switch-tip is correctly oriented and fully inserted into your device's charging port.
• If using the USB-A port, ensure your device's charging cable is properly connected to both the powerstation and your device.
• Try disconnecting and reconnecting the device.

7.3 Ngba agbara lọra

• Ensure you are using a high-quality USB wall adapter for recharging the powerstation.
• Gbigba agbara fun ọpọlọpọ awọn ẹrọ ni akoko kanna le dinku iyara gbigba agbara fun ẹrọ kọọkan.

8. Awọn pato

9. Atilẹyin ọja ati Support

For warranty information and customer support, please refer to the official mophie webaaye tabi iwe ti o wa pẹlu ọja rẹ. O tun le ṣàbẹwò awọn mophie Store on Amazon fun afikun oro.