Ọrọ Iṣaaju
O ṣeun fun riraasing the VONYX AM8A 8-Channel Mixer Amplifier. This integrated mixer and amplifier unit is designed for professional sound reinforcement applications, offering 8 input channels, a powerful 1000W amplifier, Bluetooth connectivity, MP3/USB/SD playback, and 16 digital effects. Please read this manual thoroughly to understand the product's features and ensure safe and optimal operation.
Awọn Itọsọna Aabo
- Ibi ti ina elekitiriki ti nwa: Connect the unit only to a grounded mains outlet with the specified voltage (230Vac/50Hz). Ensure the power cord is not damaged or pinched.
- Ọrinrin: Do not expose the unit to rain, moisture, dripping, or splashing liquids. Do not place objects filled with liquids on the unit.
- Afẹfẹ: Ensure adequate ventilation. Do not block ventilation openings. Avoid placing the unit on soft surfaces that may obstruct airflow.
- Ooru: Jeki ẹyọ kuro lati awọn orisun ooru gẹgẹbi awọn imooru, awọn iforukọsilẹ ooru, awọn adiro, tabi awọn ohun elo miiran ti o nmu ooru jade.
- Ṣiṣẹ: Ma ṣe gbiyanju lati ṣe iṣẹ fun ẹyọkan funrararẹ. Tọkasi gbogbo iṣẹ si awọn oṣiṣẹ iṣẹ ti o peye.
- Ninu: Disconnect the unit from the power supply before cleaning. Use a dry cloth for cleaning.
- Ibi: Gbé ẹ̀rọ náà sí orí ilẹ̀ tí ó dúró ṣinṣin, tí ó tẹ́jú kí ó má baà jábọ́.
Ọja Pariview
The VONYX AM8A combines an 8-channel mixer with a powerful amplifier, offering versatile audio control and output capabilities. Key features include:
- Integrated 2x 500W (4 Ohm) / 2x 300W (8 Ohm) power amplifier.
- Built-in MP3 player with USB and SD card slots.
- Bluetooth receiver for wireless audio streaming.
- +48V Phantom power for condenser microphones.
- 5-band graphic equalizer for main output.
- DSP with 16 digital effects.
- PFL (Pre-Fader Listen) function per channel.
- Multiple input options: XLR microphone, 6.3mm jack line, RCA line.
- Tone control (Hi/Low) per channel.
- Speaker outputs (6.3mm jack) and XLR line outputs.
Nọmba 1: Iwaju view of the VONYX AM8A 8-Channel Mixer Amplifier, showing all input channels, controls, and the master section.
Nọmba 2: Close-up of the VONYX AM8A's graphic equalizer and master controls, including the DSP effects section.
Nọmba 3: Detail of the integrated MP3 player with USB and SD card slots, and Bluetooth functionality on the VONYX AM8A.
Ṣeto
1. Unpacking
Carefully remove the mixer amplifier from its packaging. Inspect the unit for any signs of damage during transit. Retain the original packaging for future transport or storage.
2. Asopọ agbara
- Rii daju pe iyipada agbara lori nronu ẹhin wa ni ipo PA.
- Connect the supplied power cable to the AC IN socket on the rear panel of the mixer amplifier.
- Plug the other end of the power cable into a suitable grounded 230Vac/50Hz mains outlet.
3. Awọn isopọ titẹ sii
The AM8A features 8 input channels, each with XLR microphone inputs and 6.3mm jack line inputs. Additional RCA inputs are available for stereo sources.
- Awọn gbohungbohun: Connect microphones to the XLR inputs (CH1-CH8). If using condenser microphones, activate the +48V Phantom Power switch (located near the master section) after all microphones are connected and before powering on.
- Awọn ẹrọ Ipele Laini: Connect instruments, keyboards, or other line-level devices to the 6.3mm jack inputs (CH1-CH8). For stereo sources, use the RCA inputs.
4. O wu Awọn isopọ
Connect your passive speakers and monitoring devices to the appropriate outputs.
- Awọn agbọrọsọ: Connect passive speakers to the 6.3mm jack SPEAKER OUTPUTS (LEFT and RIGHT) on the rear panel. Ensure the impedance of your speakers matches the amplifier's specifications (4-8 Ohm).
- Ita Amplifiers/Recording Devices: Use the XLR MAIN OUTPUTS (LEFT and RIGHT) to connect to external power ampliifiers tabi ẹrọ gbigbasilẹ.
- Agbekọri: Plug headphones into the 6.3mm jack HEADPHONES output on the front panel for monitoring.
Nọmba 4: Rear panel of the VONYX AM8A, showing power input, main outputs, and speaker outputs.
Awọn ilana Iṣiṣẹ
1. Agbara lori / Paa
- Before powering on, ensure all channel faders and the main fader are set to their minimum positions.
- Flip the POWER switch on the rear panel to the ON position.
- To power off, reverse the process: lower all faders, then switch off the unit.
2. Channel Controls (CH1-CH8)
- Anfani: Ṣe atunṣe ifamọ igbewọle fun ikanni kọọkan. Ṣeto eyi lati ṣaṣeyọri ifihan agbara ti o lagbara laisi gige (iparun).
- HI/LOW EQ: Two-band equalizer for adjusting the high and low frequencies of each channel.
- EFF: Controls the amount of signal sent to the internal DSP effects processor.
- PAN: Adjusts the stereo position (left to right) of the channel's signal.
- PFL: (Pre-Fader Listen) Activates monitoring of the channel's signal through headphones, independent of the channel fader.
- CHANNEL FADER: Controls the output level of each individual channel to the main mix.
3. Àwọn Ìṣàkóso Àgbà
- MAIN FADER (L+R): Controls the overall output volume of the mixer amplifier.
- FOONU: Ṣe atunṣe iwọn didun ti iṣelọpọ agbekọri.
- OLÙṢẸ̀DÁ ÀWÒRÁN: A 5-band equalizer (70Hz, 250Hz, 1KHz, 4KHz, 12KHz) to fine-tune the overall frequency response of the main mix.
- DSP EFFECTS: Select from 16 digital effects using the 'UP' and 'DOWN' buttons. Adjust the 'EFF LEVEL' knob to control the wet/dry mix of the effects.
- +48V PHANTOM: Activates phantom power for condenser microphones connected to the XLR inputs.
4. MP3/USB/SD Player & Bluetooth
The integrated media player supports USB drives and SD cards for MP3 playback, and also features Bluetooth connectivity.
- Sisisẹsẹhin USB/SD: Insert a USB drive or SD card into the respective slot. The unit will automatically detect and begin playing compatible audio files. Use the transport controls (Play/Pause, Skip) to navigate.
- Mimuuṣiṣẹpọ Bluetooth: Activate Bluetooth on your mobile device. Select 'VONYX AM8A' from the list of available devices. Once paired, you can stream audio wirelessly to the mixer amplifier.
- Aṣayan Ipo: Use the 'MODE' button to switch between USB, SD, and Bluetooth input sources.
Itoju
- Ninu: Regularly clean the unit with a soft, dry, lint-free cloth. Do not use abrasive cleaners, solvents, or chemical sprays.
- Afẹfẹ: Ensure the ventilation grilles are free from dust and debris to maintain proper cooling.
- Ibi ipamọ: When not in use for extended periods, store the unit in a cool, dry place, preferably in its original packaging, away from direct sunlight and extreme temperatures.
- Iṣakoso USB: Jeki awọn kebulu ṣeto ati ofe lati awọn kinks tabi atunse pupọ lati ṣe idiwọ ibajẹ.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ko si agbara | Power cable disconnected; Power switch off; Blown fuse | Check power cable connection; Ensure power switch is ON; Replace fuse if necessary (refer to qualified technician). |
| Ko si ohun jade | Main fader down; Channel fader down; Speaker cables disconnected/faulty; Incorrect input selection; Amplifier protection mode | Raise main and channel faders; Check speaker connections; Verify input source; Power cycle the unit. |
| Ohun ti o daru | Input gain too high; Output level too high; Faulty cable/speaker | Reduce input GAIN; Lower main fader; Check all cables and speakers. |
| Gbohungbohun ko ṣiṣẹ | Microphone not connected; Phantom power off (for condenser mics); Channel fader down; Faulty microphone/cable | Check microphone connection; Activate +48V Phantom Power; Raise channel fader; Test with another microphone/cable. |
| Bluetooth ko sopọ | Bluetooth not enabled on device; Unit not in Bluetooth mode; Device too far | Ensure Bluetooth is active on your device; Press MODE button to select Bluetooth; Move device closer to the mixer. |
Awọn pato
| Ẹya ara ẹrọ | Sipesifikesonu |
|---|---|
| Nọmba awoṣe | 172.574 |
| Power Output (4 Ohm) | 2x 500W |
| Power Output (8 Ohm) | 2x 300W |
| Iwọn Igbohunsafẹfẹ | 20 Hz - 20 kHz |
| THD (Ipapọ ti irẹpọ) | <0.1% |
| EQ Hi | ± 15 dB / 12 kHz |
| EQ Lo | ± 15 dB / 70 Hz |
| Sensitivity Input | +5dB ~ -40dB |
| Sensitivity Input Mic | -15dB ~ -60dB |
| Ipele Ijade | +12 dB (3 V) |
| Agbekọri Ijade | 300mW @ 32 Ohm |
| Asopọmọra Voltage | 230Vac / 50Hz |
| Awọn iwọn (L x W x H) | 320 x 300 x 140 mm |
| Iwọn | 12 kg |
| Nọmba ti awọn ikanni | 8 |
| Asopọmọra Technology | USB, Bluetooth |
| Ohun ti nwọle | XLR, RCA, 6.35mm Jack, USB |
| O wu Asopọmọra Iru | XLR, 6.35mm TRS |
Atilẹyin ọja ati Support
VONYX products are designed for reliability and performance. For warranty information, please refer to the terms and conditions provided at the point of purchase or contact your local VONYX dealer. For technical support or service inquiries, please visit the official VONYX webojula tabi kan si wọn onibara iṣẹ Eka.
