BEPER BP.961 Automatic Pot Stirrer Instruction Manual

Ọrọ Iṣaaju

O ṣeun fun riraasing the BEPER BP.961 Automatic Pot Stirrer. This device is designed to simplify your cooking process by providing continuous, hands-free stirring for various dishes. Please read this manual carefully before first use to ensure proper operation, maintenance, and safety.

Ọja Pariview

The BEPER BP.961 is a rechargeable, cordless automatic stirrer featuring a heat-resistant plastic body and paddles. It offers two speed settings and is designed to fit most standard pots.

Awọn ẹya pataki:

• Gbigba agbara ati Ailokun: Allows for flexible use without being tethered to an electrical outlet.
• Eto Iyara Meji: Adjust stirring intensity for different recipes.
• Adjustable Pot Fit: Dual clips secure the stirrer to pots with diameters of 15-25 cm and heights of 10-20 cm.
• Igbesi aye batiri gigun: Provides up to 2 hours of operation on a full charge (4-hour charging time), with 15 minutes of use even on low battery.
• Lilo Iwapọ: Ideal for stirring various dishes such as sweet and savory sauces, creams, jams, risottos, polenta, and more.

Awọn eroja:

1. Akọkọ Motor Unit
2. Adjustable Stirring Arms with Clips
3. Stirring Paddles
4. Ngba agbara Adapter

Ṣeto

Before first use, ensure the device is fully charged. Assemble the stirring unit as follows:

1. Gba agbara si Ẹrọ naa: Connect the charging adapter to the main motor unit and plug it into a power outlet. Allow approximately 4 hours for a full charge.
2. Attach Stirring Arms: Align the main motor unit with the central opening of the adjustable stirring arms. Gently push until it clicks into place.
3. Insert Stirring Paddles: Insert the stirring paddles into the designated slots at the bottom of the stirring arms. Ensure they are securely fitted.
4. Adjust for Pot Size: The stirring arms are adjustable. Extend or retract the arms to fit your pot's diameter (15-25 cm). The clips on the arms can be adjusted for pot height (10-20 cm).

Isẹ

1. Place in Pot: Once assembled and adjusted, carefully place the stirrer into your pot, ensuring the clips are securely fastened to the pot's rim. The stirring paddles should be submerged in the food.
2. Agbara Tan: Press the rubberized power button on the main motor unit to turn the device on.
3. Yan Iyara: The device has two speed settings. Press the power button once for the first speed, and again for the second speed. Press a third time to turn off.
4. Ìrúkèrúdò Àtòjọ: The stirrer will continuously mix the contents of your pot. Monitor the process to ensure desired consistency.
5. Agbara Pa: To stop stirring, press the power button until the device turns off.
6. Remove from Pot: Carefully remove the stirrer from the pot after use.

Itoju

Regular cleaning and proper care will extend the life of your automatic pot stirrer.

• Ninu: After each use, disassemble the stirring arms and paddles from the main motor unit. Wash the stirring arms and paddles with warm, soapy water. The main motor unit should be wiped clean with a damp aṣọ; maṣe gbe e sinu omi.
• Ibi ipamọ: Store the device in a clean, dry place when not in use.
• Itọju Batiri: To maintain battery health, avoid completely draining the battery frequently. Recharge the device when the battery indicator shows low power.

Laasigbotitusita

Awọn pato

Atilẹyin ọja ati Support

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official BEPER webojula. Jeki ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.