Why will my ABRAMTEK E600 speaker not charge?

If your ABRAMTEK E600 speaker is not charging, please follow these troubleshooting steps based on the user manual:Check the Connection: Ensure the provided USB-C data cable is securely plugged into the speaker's USB port and a compatible USB power adapter.Try a Different Power Source: Test a different USB wall adapter or a different USB port on a computer to rule out a faulty power source.Inspect the Cable: Try using a different USB-C cable to ensure the original cable is not damaged.Perform a Factory Reset: Locate the RST (Reset) pinhole on the side panel of the speaker. Use a small, thin object (like a paperclip) to press the reset button, which can resolve software-related charging issues.Verify Charging Time: A full charge typically takes approximately 4.5 hours. Ensure you are leaving it plugged in long enough to see a change in the battery status.If the speaker still does not charge or power on after these steps, the battery may have reached the end of its estimated 3-year lifespan, or there may be a hardware fault. You may need to contact ABRAMTEK support for warranty claims.

ABRAMTEK E600

ABRAMTEK E600 Bluetooth Speaker User Manual

Awoṣe: E600

Ọrọ Iṣaaju

This manual provides essential information for the safe and effective operation of your ABRAMTEK E600 Bluetooth Speaker. Please read this manual thoroughly before using the product and retain it for future reference.

The ABRAMTEK E600 is a high-power wireless speaker designed for versatile use, featuring DPAC Super Bass Technology and True 360° Surround Sound. It supports Bluetooth connectivity and stereo pairing for an enhanced audio experience.

Ohun ti o wa ninu Apoti

Daju pe gbogbo awọn paati wa lori ṣiṣi silẹ:

ABRAMTEK E600 Bluetooth Speaker (x1)
USB-C Data Cable (x1)
3.5mm AUX Cable (x1)
Itọsọna olumulo (x1)

Ọja Pariview

Familiarize yourself with the speaker's design and key components.

ABRAMTEK E600 Bluetooth Speaker, full view

olusin 1: Full view of the ABRAMTEK E600 Bluetooth Speaker, showcasing its cylindrical design and black mesh top section.

Top panel of ABRAMTEK E600 speaker with control buttons

Figure 2: Close-up of the speaker's top panel, showing the power button, volume controls (+/-), and mode button (M).

Side panel of ABRAMTEK E600 speaker with ports

Nọmba 3: View of the speaker's side panel, indicating the RST (reset), AUX, USB, and OUT ports.

Figure 4: The speaker positioned next to a television, illustrating its dimensions: 5.3 inches (13.4 cm) in diameter and 23.6 inches (60 cm) in height.

Ṣeto

1. Gbigba agbara Agbọrọsọ

Before first use, fully charge the speaker. Connect the provided USB-C cable to the speaker's USB port and the other end to a compatible USB power adapter (not included). The charging time is approximately 4.5 hours.

2. Agbara Tan / Paa

To Power On: Press and hold the power button on the top panel until the indicator light illuminates.
To Power Off: Press and hold the power button again until the indicator light turns off.

3. Sisopọ Bluetooth

Rii daju pe agbọrọsọ ti wa ni titan ati ni ipo sisọpọ Bluetooth (itọkasi nipasẹ ina bulu didan).
Lori ẹrọ rẹ (foonuiyara, tabulẹti, kọǹpútà alágbèéká), mu Bluetooth ṣiṣẹ ki o wa awọn ẹrọ to wa.
Select "ABRAMTEK E600" from the list of devices.
Ni kete ti a ti sopọ, ina Atọka yoo tan buluu to lagbara.

4. Wired Connection (AUX)

To connect via AUX, plug one end of the 3.5mm AUX cable into the speaker's AUX port and the other end into the audio output jack of your device. The speaker will automatically switch to AUX mode.

5. Stereo Pairing (True Wireless Stereo - TWS)

To achieve true left and right channel stereo sound, you can connect two compatible E600 speakers wirelessly:

Ensure both E600 speakers are powered on and not connected to any Bluetooth device.
On one speaker (this will be the master), press and hold the 'M' (Mode) button until you hear a pairing tone.
Awọn agbohunsoke meji yoo wa laifọwọyi ati sopọ si ara wọn. Ni kete ti o ti sopọ, iwọ yoo gbọ ohun orin idaniloju kan.
Now, connect your device to the master speaker via Bluetooth as described in step 3. The audio will play in stereo across both speakers.

Akiyesi: For optimal stereo separation, place the speakers appropriately within your listening environment.

Awọn ilana Iṣiṣẹ

Awọn iṣakoso

Bọtini / Port	Išẹ
Bọtini agbara	Tẹ mọlẹ lati Tan/Pa a.
'+' Bọtini	Short press: Next Track. Long press: Increase Volume.
'- Bọtini	Short press: Previous Track. Long press: Decrease Volume.
'M' (Mode) Button	Short press: Switch between Bluetooth/AUX modes. Long press: Initiate TWS pairing.
Ibudo AUX	3.5mm ohun igbewọle fun ti firanṣẹ asopọ.
Ibudo USB	USB-C gbigba agbara ibudo.
RST (Tunto)	Small pinhole for factory reset (use a thin object).

Iṣakoso Imọlẹ LED

The speaker features a soft ambient LED light at its base. To turn the light off or on, quickly press the power button twice.

Itoju

Sọ agbọrọsọ mọ pẹlu asọ asọ ti o gbẹ. Ma ṣe lo abrasive ose tabi epo.
Yago fun ṣiṣafihan agbọrọsọ si awọn iwọn otutu to gaju, ọriniinitutu, tabi oorun taara.
Do not immerse the speaker in water. It is not waterproof.
Tọju agbohunsoke ni itura, ibi gbigbẹ nigbati o ko ba lo fun awọn akoko gigun.

Laasigbotitusita

Isoro	Owun to le Fa / Solusan
Agbọrọsọ ko ni agbara lori.	Battery may be depleted. Connect to power source and charge.
Ko le so pọ nipasẹ Bluetooth.	Ensure speaker is in pairing mode (flashing blue light). Rii daju pe Bluetooth ti ṣiṣẹ lori ẹrọ rẹ. Move speaker closer to your device. Pa awọn asopọ Bluetooth ti tẹlẹ lori ẹrọ rẹ kuro ki o tun gbiyanju lẹẹkansi. Perform a factory reset using the RST pinhole.
Ko si ohun tabi iwọn kekere.	Adjust volume on both the speaker and your connected device. Ensure correct input mode (Bluetooth/AUX) is selected. Check AUX cable connection if using wired mode.
Stereo pairing (TWS) fails.	Ensure both speakers are E600 models and not connected to any other Bluetooth device. Tun awọn igbesẹ asopọ TWS ṣe pẹlu iṣọra. Ensure speakers are within close proximity during pairing.
Audio distortion at high volume.	Din iwọn didun silẹ lori mejeeji agbọrọsọ ati ẹrọ ti a ti sopọ.

Awọn pato

Ẹya ara ẹrọ	Ẹ̀kúnrẹ́rẹ́
Orukọ awoṣe	E600
Agbọrọsọ Iru	Subwoofer
Agbọrọsọ Agbara Ijade ti o pọju	100 Wattis
Asopọmọra Technology	Iranlọwọ, Bluetooth, USB
Imọ-ẹrọ Ibaraẹnisọrọ Alailowaya	Bluetooth
Bluetooth Ibiti	20 Mita
Ipo Ijade Ohun	Sitẹrio, Agbegbe
Idahun Igbohunsafẹfẹ	30 Hz
Ifihan Ibuwọlu-si-Noise	95 dB
Igbesi aye batiri	3 years (estimated lifespan)
Agbara Batiri	4400 mAh
Akoko gbigba agbara	Awọn wakati 4.5
Awọn iwọn Ọja (D x W x H)	5.3" x 5.3" x 23.6"
Iwọn Nkan	7.48 iwon (3.4 kilo)
Ohun elo	Apapo
Se mabomire	Rara
Awọn irinše to wa	E600 bluetooth speaker, USB-C data cable, 3.5MM aux cable, User manual

Atilẹyin ọja ati Support

The ABRAMTEK E600 Bluetooth Speaker comes with a limited warranty. Please refer to the warranty card included in your packaging for specific terms and conditions.

For further assistance, troubleshooting, or warranty claims, please visit the official ABRAMTEK store or contact customer support through the details provided on the product packaging or the official brand webojula.

Official ABRAMTEK Store: ABRAMTEK Store on Amazon

Alaye Aabo pataki

Do not disassemble, repair, or modify the speaker. This may cause damage, electric shock, or fire, and will void the warranty.
Keep the speaker away from water, moisture, and other liquids.
Do not expose the speaker to open flames or extreme heat.
Lo awọn kebulu gbigba agbara ti a pese tabi niyanju nikan ati awọn oluyipada.
Jeki kuro ni arọwọto awọn ọmọde.
Yago fun gbigbọ gigun ni iwọn giga lati ṣe idiwọ ibajẹ igbọran.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.