Ọrọ Iṣaaju
This manual provides detailed instructions for the safe and proper installation and use of your PERLESMITH PSML1-E TV Wall Mount. Please read all instructions carefully before beginning installation. If you have any questions, contact PERLESMITH customer support.
Alaye Aabo
IKILO: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding your warranty. Do not install this product on plasterboard, hollow walls, drywall, or soft walls. Only install on solid concrete walls, brick walls, or solid wood stud walls.
- Rii daju wipe awọn iṣagbesori dada le kuro lailewu ni atilẹyin awọn ni idapo àdánù ti awọn òke ati awọn tẹlifisiọnu.
- Maṣe kọja agbara iwuwo ti o pọju ti 52 kg (114 lbs).
- Oke yii jẹ apẹrẹ fun awọn TV laarin awọn inṣi 26 ati 75.
- Lo jia ailewu ti o yẹ lakoko fifi sori ẹrọ, pẹlu aabo oju.
- Lo ohun èlò ìwádìí láti rí àwọn igi tí ó wà ní ọ̀nà tí ó tọ́.
- Tí o kò bá ní ìdánilójú nípa apá kan nínú ìfisílé náà, wá ìrànlọ́wọ́ ọ̀jọ̀gbọ́n.
Image: Diagram highlighting the robust construction and 52kg weight capacity of the PERLESMITH TV mount, featuring secure dual hooks and a 3-layer solid steel plate.
Ṣayẹwo ibamu
Before installation, verify the following:
- Iwon TV: Your TV must be between 26 and 75 inches.
- Iwọn TV: Your TV must weigh no more than 52 kg (114 lbs).
- Ilana VESA: Check the four mounting holes on the back of your TV. The VESA pattern (horizontal x vertical) must be within the range of 75x75 mm to 400x400 mm. Compatible VESA patterns include: 75x75, 100x100, 200x100, 200x200, 200x300, 200x400, 300x200, 300x300, 400x200, 400x300, 400x400 mm.
- Odi Iru: The mount is suitable for solid concrete walls, brick walls, or solid wood stud walls. Do NOT install on plasterboard, hollow walls, drywall, or soft walls.
Image: Diagram illustrating how to check TV VESA pattern, weight, size, and suitable wall types for installation.
Image: VESA compatibility diagram, illustrating the range of VESA patterns supported by the mount, from 75x75mm up to 400x400mm.
Package Awọn akoonu
Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or defective, contact PERLESMITH customer support.
Image: Main components of the PERLESMITH TV Wall Mount, showing the wall plate and the two vertical TV brackets.
Ni igbagbogbo package naa pẹlu:
- Odi Awo
- TV Brackets (2 pieces)
- Assorted TV Screws (M4, M6, M8)
- Spacers and Washers
- Wall Mounting Hardware (Lag bolts, concrete anchors)
- Level (for some kits)
- Ilana itọnisọna
Eto ati fifi sori
Follow these steps for a secure installation. A quick installation can be completed in approximately 15 minutes with proper tools and preparation.
Igbesẹ 1: So awọn akọmọ TV pọ si TV
- Farabalẹ gbe oju TV rẹ si isalẹ lori rirọ, dada ti o mọ lati ṣe idiwọ awọn ikọlu.
- Identify the correct diameter and length of screws for your TV's VESA mounting holes. Use spacers if the TV back is uneven or if cables need clearance.
- Attach the two vertical TV brackets to the back of your TV using the selected screws and washers. Ensure the brackets are centered and securely tightened. The hooks on the brackets should face downwards.
Image: Step 1 of the installation process, showing the TV brackets being attached to the back of the television.
Igbese 2: So Awo Odi si Odi
- Determine the desired height for your TV. Mark the location for the wall plate on the wall.
- For wood stud installation: Use a stud finder to locate the center of the wood studs. Mark the drilling points. Drill pilot holes (recommended size specified in manual, typically 5.5mm/7/32"). Secure the wall plate using lag bolts and washers.
- For concrete/brick wall installation: Use the wall plate as a template to mark drilling points. Drill holes (recommended size specified in manual, typically 10mm/3/8"). Insert concrete anchors into the drilled holes. Secure the wall plate using lag bolts and washers.
- Use a level to ensure the wall plate is perfectly horizontal before tightening all bolts.
Igbese 3: So TV sori Awo Odi
- Pẹlu iranlọwọ, farabalẹ gbe TV naa pẹlu awọn biraketi ti a so.
- Align the hooks on the TV brackets with the top edge of the wall plate. Gently lower the TV, ensuring the brackets engage securely with the wall plate.
- Engage the safety locks (if present) on the bottom of the TV brackets to prevent accidental dislodgement.
Image: A person completing the final step of hanging the TV onto the wall mount, illustrating the quick installation process.
Image: Detail of the safety lock mechanism, which secures the TV brackets to the wall plate.
Aworan: Isunmọ view of the anti-drop design, ensuring the TV remains securely attached to the mount.
Awọn ilana Iṣiṣẹ
The PERLESMITH PSML1-E is a fixed TV wall mount. Once installed, the TV will remain in a static position, close to the wall (approximately 30 mm distance). This design provides a sleek, low-profile irisi.
Image: A television mounted on the wall, demonstrating the minimal 30mm distance from the wall for a low-profile wo.
While the mount is fixed, some models may allow for a slight tilt adjustment up to 8 degrees. Refer to your specific product's features for tilt adjustment capabilities. To adjust, loosen the tilt bolts on the TV brackets, set the desired angle, and re-tighten the bolts securely.
Itoju
Itọju deede ṣe idaniloju gigun ati ailewu ti oke ogiri TV rẹ.
- Ayewo Igbakọọkan: Annually check all screws and bolts to ensure they remain tight. Re-tighten if necessary.
- Ninu: Mu ese naa nu pẹlu asọ ti o gbẹ. Yago fun abrasive ose tabi epo.
- Ṣayẹwo ibajẹ: Inspect the mount for any signs of wear, corrosion, or damage. If damage is found, do not use the mount and contact customer support.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| TV kii ṣe ipele lẹhin fifi sori ẹrọ. | Odi awo ko ipele nigba fifi sori. | Carefully remove the TV. Loosen the wall plate bolts, adjust with a level, and re-tighten. Re-hang the TV. |
| TV ko yẹ sori pẹpẹ naa. | Àwòrán VESA tàbí ìwọ̀n/ìwúwo TV tí kò tọ́. | Verify TV specifications against the mount's compatibility (VESA, size, weight). Ensure correct screws and spacers are used. |
| Oke kan lara riru. | Improper wall installation or loose fasteners. | Immediately remove the TV. Re-check all wall mounting bolts and TV bracket screws for tightness. Ensure installation on a suitable wall type (solid concrete, brick, or wood stud). If unsure, consult a professional. |
| Cables are pinched or difficult to connect. | Insufficient space between TV and wall. | Ensure spacers are used if needed to provide adequate clearance for cables. Re-route cables carefully. |
Awọn pato
- Awoṣe: PSML1-E
- Brand: PERLESMITH
- Ohun elo: Alloy Irin
- Àwọ̀: Dudu
- Iru fifi sori ẹrọ: Ògiri Ògiri
- Iru gbigbe: Ti o wa titi
- Awọn iwọn TV ibaramu: 26 - 75 inches
- Agbara iwuwo to pọ julọ: 52 kg (114 lbs)
- Ibamu VESA: 75x75mm, 100x100mm, 200x100mm, 200x200mm, 200x300mm, 200x400mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm
- Ijinna lati Odi: Isunmọ 30 mm
- Igun Tita ti o pọju: 8 Degrees (if applicable to specific unit)
- Ìwọ̀n Nkan: 1.12 kilo
- Awọn iwọn idii: 43.7 x 11.3 x 4.9 cm
- UPC: 713721601516
Atilẹyin ọja ati Support
PERLESMITH products are designed for durability and reliability. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official PERLESMITH webojula. Tọju iwe-ẹri rira rẹ bi ẹri rira fun awọn iṣeduro atilẹyin ọja.