Globe Electric 67135 72" Floor Lamp with Adjustable Reading Light Instruction Manual

Ọrọ Iṣaaju

This manual provides comprehensive instructions for the safe assembly, operation, and maintenance of your Globe Electric 67135 72" Floor Lamp with Adjustable Reading Light. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.

Awọn Itọsọna Aabo pataki

To reduce the risk of fire, electric shock, or injury to persons, please adhere to the following safety guidelines:

• Ka gbogbo ilana.
• Do not connect electricity until the lamp ti wa ni kikun jọ.
• Yọọ lamp from the power outlet before cleaning or changing bulbs.
• Maṣe lo l yiiamp nitosi omi tabi ni damp awọn ipo.
• Use only the specified bulb types and wattages lati yago fun overheating.
• Rii daju pe lamp ti wa ni gbe lori kan idurosinsin, ipele dada lati se tipping.
• Jeki okun agbara kuro lati awọn aaye ti o gbona.
• Ma ṣe ṣiṣẹ lamp pẹlu okun ti o bajẹ tabi plug.
• Eleyi lamp wa fun lilo inu ile nikan.

Package Awọn akoonu

Carefully unpack all components and inspect for any damage. If any parts are missing or damaged, do not proceed with assembly. Contact customer support for assistance.

• Lamp Ipilẹ
• Pole Sections (multiple)
• Torchiere Lamp Ori
• Imọlẹ kika adijositabulu
• Torchiere Shade (frosted plastic)
• Reading Light Shade (frosted plastic)
• Ìwé Ìtọ́ni (ìwé ìtọ́ni yìí)

Aworan: Pariview ti lamp's dimensions and components.

Awọn ilana Apejọ

Follow these steps to assemble your floor lamp:

1. Mura ipilẹ: Gbe lamp base on a flat, stable surface.
2. Ṣepọ Ọpa naa: Carefully thread the power cord through the pole sections. Screw the pole sections together clockwise, starting from the base, ensuring each section is securely tightened. Pull any excess cord from the base as you assemble to prevent slack.
3. So Lamp Awọn olori: Screw the torchiere lamp head onto the top pole section. The adjustable reading light is typically pre-attached to one of the upper pole sections.
4. Fi Awọn Ojiji sori ẹrọ: For both the torchiere and reading light, unscrew the socket ring from the bulb holder. Place the frosted plastic shade over the bulb holder and secure it by screwing the socket ring back into place.
5. Fi Isusu sii: Refer to the "Bulb Requirements" section for correct bulb types and wattages. Screw the appropriate bulbs into the sockets.
6. Ibi Ipari: Position the assembled lamp in your desired location, ensuring the cord is not pinched or a tripping hazard.

Image: The fully assembled Globe Electric 67135 floor lamp.

Awọn ilana Iṣiṣẹ

Once assembled and plugged into a standard 120V outlet, your lamp ti šetan fun lilo.

Main Torchiere Light

The main torchiere light features a 3-step rotary dimmer switch. Rotate the switch clockwise to cycle through low, medium, and high light settings, and then off. This allows you to adjust the ambient lighting to your preference.

Image: Operating the 3-step rotary dimmer switch.

Imọlẹ kika adijositabulu

The adjustable reading light has its own separate on/off switch, typically located on the light head or near its base. The flexible gooseneck allows you to direct the light precisely where needed, making it ideal for reading or task lighting.

Image: The adjustable reading light feature.

Boolubu Awọn ibeere

Eleyi lamp requires two E26 medium base bulbs (sold separately).

• Main Torchiere Light: 1x E26 Medium Base, maximum 150W bulb.
• Imọlẹ kika ti o le ṣatunṣe: 1x E26 Medium Base, maximum 40W bulb.

Awọn lamp is compatible with LED, incandescent, and halogen bulbs. For optimal performance and energy efficiency, LED or incandescent bulbs are recommended.

Aworan: Examples of suggested E26 medium base bulbs.

Itoju ati Itọju

Proper care will ensure the longevity and appearance of your lamp.

• Ninu: Yọọ l. nigbagbogboamp before cleaning. Use a soft, dry cloth to wipe down the metal and plastic surfaces. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
• Rirọpo Boolubu: Rii daju pe lamp is unplugged and the bulb has cooled completely before attempting to replace it. Screw in the new bulb firmly but gently.
• Itọju okun: Regularly inspect the power cord for any signs of damage. Avoid bending or twisting the cord excessively.

Laasigbotitusita

Ti o ba pade eyikeyi oran pẹlu l reamp, refer to the following table for common problems and solutions:

Awọn pato ọja

Atilẹyin ọja ati Support

This product is sold without a manufacturer's warranty. For any questions, concerns, or assistance with your Globe Electric product, please refer to the contact information provided on the product packaging or visit the official Globe Electric website for customer support resources.